Add to Cart
SOCAY (TSS) P0080SC Thyristor Surge Suppressors Used In Modems, Line Card, @10/700μS, 6KV
DATASHEET: PXXX0SC_v2103.1.pdf
Part Number | Marking | VDRM @IDRM=5μA | VS ① @100V/μS | VT @IT=2.2A | IS | IT | IH | CO ② @1MHz, 2V bias |
V min | V max | V max | mA max | A max | mA min | pF typ | ||
P0080SC | P008C | 6 | 25 | 4 | 800 | 2.2 | 50 | 100 |
P0300SC | P03C | 25 | 40 | 4 | 800 | 2.2 | 50 | 100 |
P0640SC | P06C | 58 | 77 | 4 | 800 | 2.2 | 150 | 100 |
P0720SC | P07C | 65 | 88 | 4 | 800 | 2.2 | 150 | 100 |
P0900SC | P09C | 75 | 98 | 4 | 800 | 2.2 | 150 | 90 |
P1100SC | P11C | 90 | 130 | 4 | 800 | 2.2 | 150 | 90 |
P1300SC | P13C | 120 | 160 | 4 | 800 | 2.2 | 150 | 90 |
P1500SC | P15C | 140 | 180 | 4 | 800 | 2.2 | 150 | 85 |
P1800SC | P18C | 170 | 220 | 4 | 800 | 2.2 | 150 | 85 |
P2300SC | P23C | 190 | 260 | 4 | 800 | 2.2 | 150 | 80 |
P2600SC | P26C | 220 | 300 | 4 | 800 | 2.2 | 150 | 80 |
P3100SC | P31C | 275 | 350 | 4 | 800 | 2.2 | 150 | 65 |
P3500SC | P35C | 320 | 400 | 4 | 800 | 2.2 | 150 | 60 |
P4200SC | P42C | 400 | 520 | 4 | 800 | 2.2 | 150 | 55 |
Notes: ① Vs is measured at 100KV/s. ② Off-state capacitance is measured in VDC=2V, VRMS=1V, f=1MHz. |
Description:
PXXX0SC Series are designed to protect broadband equipment such as modems, line card, CPE and DSL from damaging over-voltage transients.
The series provides a surface mount solution that enables equipment to comply with global regulatory standards.
Features:
u Low voltage overshoot u Low on-state voltage u Does not degrade surge capability after multiple surge events within limit u Fails short circuit when surged in excess of ratings u Low Capacitance |
Applicable Global Standards:
u TIA-968-A u ITU K.20/21 Enhanced level u ITU K.20/21 Basic Level u GR 1089 Inter building u GR 1089 Inter building u IEC 6100-4-5 u YD/T 1082 u YD/T 993 u YD/T 950 |
Series | 2/10μS1 | 8/20μS1 | 10/160μS1 | 10/560μS1 | 10/1000μS1 | 5/310μS1 | ITSM 50/60 Hz | di/dt | |
2/10μS2 | 1.2/50μS2 | 10/160μS2 | 10/560μS2 | 10/1000μS2 | 10/700μS2 | ||||
A min | A min | A min | A min | A min | A min | A min | Amps/µs max | ||
C | 500 | 400 | 200 | 150 | 100 | 150 | 50 | 500 | |
Notes:
| - Peak pulse current rating (IPP) is repetitive and guaranteed for the life of the product. - IPP ratings applicable over temperature range of -40ºC to +85ºC - The device must initially be in thermal equilibrium with -40°C < TJ < +150°C |
Part Number | Component Package | Quantity | Packaging Option | Packaging Specification | |
Pxxx0SC | DO-214AA | 2500 | Tape & Reel -12mm/13″tape | EIA -481 - D |