40 μm translucent white PE release film, silicone UV cured, for protective and packaging, tapes, labeling and graphics

Translucent white PE silicone coated release film is a type of release liner that has a layer of silicone adhesive applied to one side of a

polyethylene film. Here are some primary uses of translucent white PE silicone coated release film:

1. Protective and packaging applications:

Translucent white PE silicone coated release film is often used as a protective layer in applications where surface protection is required.

For instance, it is commonly used to protect surfaces, such as plastic sheets, from scratches and other damages during storage or

transportation.

2. Labeling and graphics applications:

Translucent white PE silicone coated release film is also frequently used as a release liner for adhesive labels or stickers.

It can be printed with high-quality graphics, such as logos and designs.

3. Thermal lamination applications:

Translucent white PE silicone coated release film is also utilized in thermal lamination where the film is heated and applied to paper to

protect the printed matter during handling.

4. Medical and healthcare applications:

Translucent white PE silicone coated release film is also used in the medical and healthcare industry for packaging of medical devices,

such as surgical instruments and equipment.

5. Automotive and electronics applications:

Translucent white PE silicone coated release film is also used in the automotive and electronics industry for the production of gaskets,

displays, and touch screens.

Overall, translucent white PE silicone coated release film provides a reliable and high-quality solution for a range of applications, including

protection, labeling, graphics, thermal lamination, medical and healthcare, automotive, and electronics applications.

Translucent white PE silicone coated release film is commonly used in the tape industry as a release liner for double-sided tapes, adhesive tapes

or labels. The use of silicone as a coating for the film provides a non-stick surface to allow the tape to be removed easily during application.

Here are some ways in which translucent white PE silicone coated release film is mainly used for the tape industry:

1. Double-Sided Tape Liner:

Translucent white PE silicone coated release film serves as a liner for double-sided tapes, protecting the adhesive layer until the time of

application. Removing the release liner ensures full contact between the tape's adhesive layer and the surface it will adhere to.

2. Adhesive Tape Liner:

Translucent white PE silicone coated release film is utilized in the adhesive tape industry to provide a protective liner for the adhesive until

it is ready to be applied.

3. Label Printing:

The translucent white PE silicone coated release film is print-compatible, making it an ideal liner to print on before the adhesive layer is applied.

This is crucial for identification or branding purposes.

4. Die-cutting:

The tape industry frequently uses die-cutting techniques to create precise shapes. For this purpose, the release liner must be easy to remove,

requiring a stable, non-tearable substrate, and translucent white PE silicone coated release film meet these criteria.

In summary, the translucent white PE silicone coated release film is commonly used as a release liner for double-sided or adhesive tapes, labels,

and printing. It offers a non-stick surface, precision cutting, and is print-compatible.

Coating silicone on the surface of PE film involves a multi-step process that includes the following:

1. Preparation of the film:

The first step is to prepare the surface of the PE film to ensure good adhesion of the silicone coating. The film may need to be cleaned and

treated with corona discharge or plasma to enhance its surface energy.

2. Application of silicone:

The silicone can be applied to the surface of the film using a wide range of methods, including spraying, dipping, or roll coating.

A silicone solution is prepared with a specific level of viscosity and concentration so it can be applied evenly to the film.

3. Curing of silicone:

Once the silicone has been applied to the film, it needs time to cure. Most commonly curing is done at a high temperature, typically above

120°C to allow uniform curing for better curing as well as adhesion to the PE substrate.

4. Trimming or die-cutting:

After the coating is cured, the coated PE film is trimmed to the correct size or cut into the desired shape using specialized equipment.

UV curing method is becoming increasingly popular for silicone coating on PE film in recent years. The UV curing method involves the use of

UV light to initiate a chemical reaction in the silicone, which then causes it to cure and crosslink. In contrast to the heat curing method, the UV-

curing process uses light waves in the ultraviolet spectrum rather than heat.

There are some advantages to using UV curing as a method to cure silicone on PE film:

1. Faster curing time:

The UV curing method is generally faster than the heat curing method and can often cure the silicone coating in just a few seconds.

2. Energy-efficient and eco-friendly:

Since UV curing does not require high heat temperatures, it is a more energy-efficient process and has a lower carbon footprint which

makes it an eco-friendly option.

3. High-quality coating:

UV curing results in a uniform and high-quality silicone coating with excellent adhesion and chemical resistance.

4. Lesser production time:

Compared to heat curing, the UV curing process can save time, resulting in faster production times.

5. No heat damage:

UV curing on PE film does not result in any heat damage, which ensures that the substrate's properties remain intact in the production process.

In 2016, HSF Materials Technology Co., Ltd. became a national high-tech enterprise specializing in the research

and development, production, and sales of PE and PP polymer materials. The headquarters is located in Changjing

Industrial Park, Jiangyin City, Jiangsu Province, with more than 100 employees and multiple production lines and

equipment for PE and PP materials. From 2022 to Nov. 2023, HSF Materials Technology Co., Ltd. has completed the

preliminary construction of an industrial cluster integrating blow molding, casting, film coating, and laminating through

investment or equity participation, and its products cover various industries such as labels, packaging, electronics,

building materials, and medical. In August 2023, a subsidiary was established in Shanghai as a sole import and export t

rade window, dedicated to meeting the business needs of overseas customers.

HSF believes that Honor is Shaped from Fulfillment, both for individuals and companies.

By Hearkening to the voices of customers and Shaping their expectations, therefore we will make results Fabulous.

Pre-sales consulting:

To ensure minimum errors at the initial stages, it is imperative to fully comprehend the

customers' most pressing needs and concerns, and completely eliminate all probabilities of mistakes.

Accordingly, we strive to discern all aspects of product requirements and application scenarios

that customers desire, whenever the situation arises.

- Fully understand the requirements, usage environment, scenarios,

and other important factors, and provide customized solutions.

- Provide a comprehensive product quotation sheet for customers to have a clear understanding.

Sales follow-up:

- Provide real-time updates on production and delivery status to customers.

- In a timely and proactive manner, confirm with customers the notes and other

requirements in the documentation, in order to avoid unnecessary detention of goods at the destination.

- Regularly update the movement status of goods on the designated transportation mode to ensure a one-stop service experience.

Post-sales service:

- Apart from malicious complaints, we humbly accept any effective suggestions for improvement.

HSF consistently strives for continuous improvement in product and service quality, as we believe that honor is shaped from fulfillment.

- Apr. 2016

Established in Wuxi City, Jiangsu Province

- Sep. 2019

Invested in and become shareholder of Coating plants

- Nov. 2020

Invested in and become shareholder of TPU plant

- Sep. 2021

Merged a laminating plant

- Jul. 2023

Set up an independently operated Shanghai HSF Materials Technology Co.,Ltd as the only window for import & export business.

* Total of 8 currencies are available to pick up in export sales activity.

USD, EUR, AUD, GBP, CAD, HKD, JPY, SGD, CNY

The group may be small in size, but its core strength lies in the power of its tightly clenched fist.

HSF boasts extensive knowledge of polymer membranes, backed by both theoretical and practical expertise.

The team comprises over 10 individuals, including industry veterans with 20-40 years of experience in

technology research and development, craftsmanship, and field operations. Adding to the mix are 5 technical

sales teams that offer round-the-clock service, ensuring customers are fully supported. Our sales staff is prompt,

professional, and passionate, always on standby to address any concerns you may have no matter the time or place.

- 1. Production line personnel: 40 people

- 2. Quality assurance & Quality control: 6 people

- 3. Engineers in production and R & D: 8 people

- 4. Sales: 4 people

- 5. Administration: 5 people