Control Valve PC300-8M0 PC350-8M0 Excavator Control Valve 723-47-25601 For KOMATSU

Brand Name:Komatsu
Model Number:PC300-8M0 PC350-8M0
Minimum Order Quantity:1 Sets
Delivery Time:3-5 days
Payment Terms:L/C, D/A, D/P, T/T, Western Union, MoneyGram
Certifiion:ISO9001
Contact Now

Add to Cart

Verified Supplier
Location: Guangzhou China
Address: GuangZhou,CHINA(No.D01,YingFeng building,No1190.Zhongshan avenue central,tianhe district,Guangzhou.)
Supplier`s last login times: within 47 hours
Product Details Company Profile
Product Details

Control Valve PC300-8M0 PC350-8M0 Excavator control valve 723-47-25601 For KOMATSU

Product Descriptio


Pos.Part NoQtyParts nameComments
723-48-26501[1]Valve Assembly, Control Komatsu257 kg.
   ["SN: 61510-UP"] analogs:["7234826500"] |$0. 
723-48-26500[1]Valve Assembly, Control Komatsu257 kg.
   ["SN: 60001-61509", "SCC: A2"] analogs:["7234826501"] |$1. 
107000-12012[19]O-ring Komatsu China0.001 kg.
   ["SN: 60001-UP"] analogs:["0700002012", "7082E11790"] 
2723-11-19130[4]O-ring Komatsu0.001 kg.
   ["SN: 60001-UP"] 
3723-46-17520[4]Ring, Back-up Komatsu0.001 kg.
   ["SN: 60001-UP"] 
407000-12021[4]O-ring Komatsu China0.01 kg.
   ["SN: 60001-UP"] analogs:["0700002021"] 
507000-13028[5]O-ring Komatsu China0.001 kg.
   ["SN: 60001-UP"] analogs:["0700003028"] 
607000-13032[8]O-ring Komatsu China0.002 kg.
   ["SN: 60001-UP"] analogs:["YM24321000350", "YM24311000320", "0700003032"] 
7723-46-17510[4]O-ring Komatsu0.001 kg.
   ["SN: 60001-UP"] 
807000-13036[1]O-ring Komatsu0.002 kg.
   ["SN: 60001-UP"] 
9723-46-17530[11]O-ring Komatsu0.001 kg.
   ["SN: 60001-UP"] 
10723-11-18150[2]O-ring Komatsu0.001 kg.
   ["SN: 60001-UP"] 
11702-16-53920[4]O-ring Komatsu0.001 kg.
   ["SN: 60001-UP"] 
12723-46-18710[1]O-ring Komatsu0.001 kg.
   ["SN: 60001-UP"] 
13722-12-19070[2]O-ring Komatsu0.001 kg.
   ["SN: 60001-UP"] 
14723-46-18720[1]O-ring Komatsu0.001 kg.
   ["SN: 60001-UP"] 
16723-46-17650[2]Valve Komatsu0.2 kg.
   ["SN: 60001-UP"] 
17723-46-14150[2]Spring Komatsu0.005 kg.
   ["SN: 60001-UP"] 






Maintenance

Here are some suggestions for the maintenance of the distribution valve of the Komatsu 350-8 excavator:

Regular inspection: Regularly check the appearance and working condition of the distribution valve. Make sure there is no obvious damage, leakage or looseness.
Clean the valve body: Regularly clean the outer surface of the distribution valve to remove dust and dirt. Use a detergent and a soft brush for cleaning, but avoid using corrosive or solvent-based cleaners.
Check the connection: Check whether the connection between the distribution valve and the hydraulic line is tight. Make sure there is no looseness or leakage at the connection.
Lubriion: Lubrie the distribution valve regularly according to the manufacturer's recommendations. Use appropriate lubricants and lubrie according to the manufacturer's regulations.
Check the seals: Regularly check the seals of the distribution valve, including O-rings, gaskets, etc. If the seals are found to be worn, aged or leaking, replace them in time.
Regular maintenance: Perform regular maintenance according to the maintenance plan provided by the manufacturer. This may include cleaning and calibrating the distribution valve, replacing seals, checking the internal parts of the valve, etc.
Please note that the above suggestions are for reference only. It is best to refer to the Komatsu 350-8 excavator owner's manual or contact Komatsu or its authorized service center for more detailed and specific maintenance instructions. Improper maintenance may cause equipment damage or failure, so it is recommended to follow the manufacturer's instructions and recommendations when performing maintenance.


About Xinfeng Machinery (XF) parts:



Excavator Spare Parts

Swing MotorTravel MotorFan Motor
Swing GearboxTravel GearboxRelief Valve
Gear PumpElectrical PartsDistribution Valve
Engine AssemblyFinal Drive AssyHydraulic Pump



Advantages


Warehouse Display

Packaging and Delivery


FAQ
1.How to quickly and accurately buy products what lneeded?
A:Provide the original parts number to us to check.

2.How long have you been in the excavator
A:We are engaged in excavator parts since 1998


3.lfI don't know the part number,what shouldI do?
A:Please send us size and pictures of old products.

4.What is the warranty of the products?
A:The warranty is 6/12 Months based on the specific product.


5.How long is your delivery time?
A:The normal delivery time is 3-5 days for stock sproductsafter getting payment. lf not in stock, we will inform you thetime requlred.

6.Which shipping term you can supply?

A:By sea,air or by express ( DHL,Fedex,TNT,UPSEMS)


7.What is your MOQ?
A:Small order and sample order are acceptable


8.Do you have any After-Sales service?
A:Yes!Our

China Control Valve PC300-8M0 PC350-8M0 Excavator Control Valve 723-47-25601 For KOMATSU supplier

Control Valve PC300-8M0 PC350-8M0 Excavator Control Valve 723-47-25601 For KOMATSU

Inquiry Cart 0