Add to Cart
20 tons on-board explosion-proof electric box electric transport cart
Technical parameters for Battery powered electric transfer carts KPX series | ||||||||||
Model | KPX-2t | KPX-5t | KPX-10t | KPX-20t | KPX-25t | KPX-30t | KPX-40t | KPX-50t | KPX-150t | |
Rated Load(t) | 2 | 5 | 10 | 20 | 25 | 30 | 40 | 50 | 150 | |
Table Size(mm) | Length | 2000 | 3500 | 3600 | 4000 | 4500 | 4500 | 5000 | 5500 | 10000 |
Width | 1500 | 2000 | 2000 | 2200 | 2200 | 2200 | 2500 | 2500 | 3000 | |
Height | 450 | 500 | 500 | 550 | 600 | 600 | 650 | 650 | 1200 | |
Wheel Base(mm) | 1200 | 2500 | 2600 | 2800 | 3200 | 3200 | 3800 | 4200 | 7000 | |
Rail Inner Gauge(mm) | 1200 | 1435 | 1435 | 1435 | 1435 | 1435 | 1435 | 1435 | 2000 | |
Wheel Diameter(mm) | Ø270 | Ø300 | Ø300 | Ø350 | Ø400 | Ø400 | Ø500 | Ø500 | Ø600 | |
Wheel Quantity | 4 | 4 | 4 | 4 | 4 | 4 | 4 | 4 | 8 | |
Ground Clearance(mm) | 50 | 50 | 50 | 50 | 50 | 50 | 50 | 50 | 75 | |
Running Speed(m/min) | 0-25 | 0-25 | 0-25 | 0-20 | 0-20 | 0-20 | 0-20 | 0-20 | 0-18 | |
Motor Power (Kw) | 1 | 1.2 | 1.6 | 2.2 | 3 | 3.5 | 4 | 5 | 15 | |
Battery Capacity (Ah) | 180 | 180 | 180 | 180 | 250 | 250 | 300 | 330 | 600 | |
Battery Voltage(V) | 24 | 36 | 48 | 48 | 48 | 48 | 48 | 48 | 72 | |
Running Time When Full Load | 4.32 | 5.4 | 4.8 | 4 | 4 | 3.5 | 3.6 | 3.3 | 2.9 | |
Running Distance for One Charge (Km) | 6.5 | 8.1 | 7.2 | 4.8 | 4.8 | 4.2 | 4.3 | 4 | 3.2 | |
Max Wheel Load (KN) | 14.4 | 25.8 | 42.6 | 77.7 | 94.5 | 110.4 | 142.8 | 174 | 266 | |
Reference Weight(t) | 2.8 | 3.6 | 4.2 | 5.9 | 6.5 | 6.8 | 7.6 | 8 | 27 |
Principle: explosion-proof rail flat car by overcoming the generation of electric spark so as to achieve the purpose of vehicle explosion-proof, the use of isolated electrical drive rail flat car. Occasion: Explosion-proof electric transport cart can be used for drying room; The explosion-proof rail car can be used in spraying workshop, painting workshop, hull and other special work workshop;
【 Product Principle 】
This series of Explosion-proof electric transport cart adopts AC motor to drive the operation of the flat car. 380V AC power supply provides power to the motor by sliding the slider of the safety sliding contact line, so as to realize the start, stop, forward and backward of the flat car.
【 Product Advantages 】
BHX sideslip contact line electric flat car is more economical and low maintenance cost.
【 Product Structure 】
Power supply voltage is 380V, any deadweight tonnage, working time is not limited, suitable for frequent start-up work.
[Use and Maintenance]
During the operation of the flat car, the reverse operation is prohibited after the flat car is not stationary.
【 Product Use 】
The Explosion-proof electric transport cart runs on the circular track. When the workpiece is hoisted to the flat car at the starting point, the flat car starts to run along the circular track until the workpiece is unloaded at the end position for the next cycle work.
Frequently Asked Questions
Q: How to install the sliding contact wire?
Answer: The grooves are installed between the tracks or on one side, and can also be installed on the nearby wall.
Q: Is the sliding line car stepless?
Answer: Can achieve, need to increase frequency converter.
Q: Can the sliding line car be used outdoors?
Answer: Often used indoors, outdoor rain and snow weather in the trench is easy to water.