
Add to Cart
Product Details:
Manufacturer : ALLEN BRADLEY
Product No. : 1794-IRT8
Product Type : Flex 8 Point Thermocouple RTD Module
The Allen-Bradley 1794-IRT8 is a Flex I/O combination module. This
module supports both RTD and Thermocouple sensors. It has Eight (8)
channels in Two (2) groups of Four (4) with nominal input ranges of
-40…100 mV dc for thermocouples for Thermocouple and 0…325 mV for
RTDs for RTD. This module has a resolution of 14 bits.
The 1794-IRT8 module is an Allen-Bradley FLEX I/O millivolt,
thermocouple, and RTD module. In a FLEX I/O system, the 1794-IRT8
module is connected to a terminal base and a power adapter.
The Allen-Bradley 1794-IRT8 is shipped with 2 cold junction
compensators. This cold junction compensator increases the accuracy
of the module for Thermocouple mode. 1794-IRT8 module has a nominal
voltage rating of 24 Volts DC and 8 analog inputs. It can connect
to up to 8 RTD or thermocouple inputs. The front panel of the
1794-IRT8 module has a nameplate that identifies the module, a
removable label that the users can customize, a keyswitch position
indicator, and LED status indicators.
Compatible RTD sensors for this module are 2-wire, 3-wire and
4-wire RTDs such as 100 ? Pt ? = 0.00385 Euro -200…870 °C
(-328…1598 °F) 200 ? Pt ? = 0.00385 Euro -200…400 °C (-328…752 °F)
100 ? Pt ? = 0.003916 U.S. -200…630 °C (-328…1166 °F) 100 ? Pt ? =
0.003916 U.S. -200…400 °C (-328…752 °F) 100 ? Nickel -60…250 °C
(-76…482 °F) 200 ? Nickel -60…200 °C (-76…362) °F) 120 ? Nickel
-80…320 °C (-112…608 °F) 10 ? Copper -200…260 °C (-328…470 °F).
While supported Thermocouple sensors by this module are
Thermocouple Type B, E, J, K, TXK/XK(L), N, R, S, and T.
This module has a resolution of 14 bits with selectable data
formats such as °C (implied decimal point XXX.X) °F (implied
decimal point XXX.X) °K (implied decimal point XXX.X) -32767…32767
0…65535 0…5000 ohms mode (implied decimal point XXX.X) -4000…+10000
millivolt mode (implied decimal point XXX.XX).
The 1794-IRT8 has diagnostic functions embedded including an open
circuit detection wherein module reading upscales or defaults to
max value when in RTD and Thermocouple mode. It also has an open
input detection time of 2 scans, overvoltage capability of 15V DC
continuous at 25 °C.
When wiring signal wirings, recommended wires are Thermocouple
wires as specified by the TC manufacturer and Belden 8761 for
millivolt signal.
Related Models:
| 1794-0F4I | 1794-ID2 | 1794-OA8 |
| 1794-ACN | 1794-IE12 | 1794-OA8I |
| 1794-ACN15 | 1794-IE4XOE2 | 1794-OA8K |
| 1794-ACNR | 1794-IE4XOE2XT | 1794-OB16 |
| 1794-ACNR1 | 1794-IE8 | 1794-OB16D |
| 1794-ACNR15 | 1794-IE8H | 1794-OB16P |
| 1794-ACNR15K | 1794-IE8K | 1794-OB32P |
| 1794-ACNR15XT | 1794-IE8XOE4 | 1794-OB8 |
| 1794-ADN | 1794-IE8XT | 1794-OB8EP |
| 1794-AENT | 1794-IF2XOF2I | 1794-OC16 |
| 1794-AENTR | 1794-IF2XOF2IXT | 1794-OE12 |
| 1794-AENTRXT | 1794-IF4I | 1794-OE4 |
| 1794-APB | 1794-IF4ICFXT | 1794-OE4K |
| 1794-APBDPV1 | 1794-IF4IXT | 1794-OE8H |
| 1794-ASB | 1794-IF8IH | 1794-OF4I |
| 1794-ASB2 | 1794-IF8IHNFXT | 1794-OF4IXT |
| 1794-ASBLT | 1794-IH16 | 1794-OF8IH |
| 1794-AV-MVI | 1794-IJ2 | 1794-OM8 |
| 1794-CE1 | 1794-IJ2K | 1794-OV16 |
| 1794-CE3 | 1794-IJ2XT | 1794-OV16P |
| 1794-CJC2 | 1794-IM8 | 1794-OV32 |
| 1794-FLA | 1794-IP4 | 1794-OW8 |
| 1794-IA16 | 1794-IR8 | 1794-OW8K |
| 1794-IA8 | 1794-IRT8 | 1794-OW8XT |
| 1794-IA8I | 1794-IRT8K | 1794-PS1 |
| 1794-IA8K | 1794-IRT8XT | 1794-PS13 |
| 1794-IB16 | 1794-IT8 | 1794-PS3 |
| 1794-IB16D | 1794-IV32 | 1794-TB2 |
| 1794-IB16XOB16P | 1794-L33 | 1794-TB3 |
| 1794-IB32 | 1794-L34 | 1794-TB32 |
| 1794-IB8 | 1794-LBL | 1794-TB32S |
| 1794-IB8S | 1794-NM1 | 1794-TB3G |
| 1794-IC16 | 1794-OA16 | 1794-TB3GS |
Company Introduction:
Achievers Automation Limited has more than 10 years experience in
the market of Industrial Automation, specialized in reselling
factory sealed Probe, Sensor, DCS,isolator barrier, HMI,
PLC,Adapter,Profibus connector and cable from Brands as BENTLY
NEVADA, Endress+Hauser, YOKOGAWA,MTL,Allen-Bradley,
Pepperl+Fuchs,Rosemount, ASCO, Schneider, Lenze, Pro-face,
Mitsubishi, Omron, Lenze, Delta, Honeywell, Siemens and etc. If you
have any request, please do not hesitate to contact us.
FAQ of Achievers
Q:Are the Products Genuine OEM Units?
A: These items have been certified by Achievers Automation Limited
to be genuine OEM Units obtained through OEM or independent
third-party channels.
Q:How will you arrange shipment?
A: We can arrange shipment based on your request. We have
cooperated forwader who can arrange shipment via FedEx, DHL,TNT
with good price.
Q:What is the warranty of goods?
A: One-year Warranty.