Working Principle:

The mixing barrel is suspended at the end of the main and driven axles through two Y-type universal joints. The two universal joints intersect and perpendicular to each other in space. When the drive shaft is dragged and rotated, the cardan envoy barrel moves repeatedly in space, such as translation, rotation and roll. Material in the cylinder is followed by three-dimensional compound movement in the axial, radial and circumferential directions. Many kinds of materials in the cylinder flow, diffuse and dope with each other, and evenly show a uniform state.

Special design for PTFE polymer powder mix with fiberglass, graphite, carbon, bronze etc. without temperature rising.

Part 1 : Equipment Overview

Equipment name: V-type mixer Equipment

model: V-100

Equipment number: one set

Equipment usage: For the mixture of powder

Basic requirements:

1, Each 40-50L material / batch mixing, and do not bring any impurities in the process of mixing.

2, The device barrel material is made of SUS304 stainless steel, the inside and outside of the barrel is polished, no mixing dead angle and don’t stick the material.

3, The equipment design is reasonable and advanced; with smooth operation, good reliability and simple operation; The noise is less than 65db.

Part 2: equipment performance

Equipment technical parameters:

1. Mixing barrel total volume of 100L, Material handling capacity: 40-50L

2, Equipment main motor power 1.5 kw.

3, Mixing time Digital setting 0-99 minutes, timing shutdown.

4, power supply: 380V / 220V / 50Hz.