Solid Inlaid Bearing Wear Resistant Metal High Load, Impact Resistance, And Non Metallic Low Coefficient
Brand Name:ABC
Certification:CE, ISO
Model Number:ABC-SIB
Minimum Order Quantity:10000pcs
Delivery Time:30days
Payment Terms:L/C, T/T, Western Union, MoneyGram
Contact Now
Add to Cart
Verified Supplier
Location:
Hefei Anhui China
Address:
No. 3, Qiaowan Road, Economic & Technological Development Area, Hefei City, Anhui Pro. (231200), China
Supplier`s last login times:
within 48 hours
Product Details
Company Profile
Product Details
Solid Inlaid Bearing Wear-Resistant Metal High Load, Impact Resistance, And Non-Metallic Low Coefficient
Product Description:
Modern design is in great demand for today's self-lubricating
bearing materials. Even in severe extreme operating environments
and maximum load conditions require maintenance-free. With the
continuous increase in cost requirements, companies are
increasingly demanding the reliability of equipment and plant
operations. Metal self-lubricating bearings can meet
maintenance-free and self-lubrication under long-term use
conditions, thereby making it possible to design reliable long-term
self-lubricating systems. Metallic self-lubricating bearing
materials can be widely used in rotating, oscillating and linear
reciprocating motion under high-load and low-speed conditions. It
can also be used in applications where conventional lubrication
cannot be achieved or forbidden, or in special conditions such as
dust and impact. It requires long-term and stable use under
conditions such as load or irradiation.
Product Features:
1. No need for oil supply device, oil hole, oil tank processing
The cost and time savings of the oil supply device, such as the
cost, processing fee and assembly fee, can significantly reduce the
manufacturing cost.
2. Reduced operating costs
Significantly reduce the use of lubricants and equipment
maintenance costs, and also eliminate the risk due to insufficient
oil supply.
3. Reduced design time
Oil-free can greatly simplify the design, structure, etc., reduce
costs, save design time, in addition, the use of self-lubricating
bearings can also improve the mechanical properties, extend the
service life and improve reliability, etc. to obtain significant
results.
4. Lubricant recovery and environmental protection
No waste oil recycling is required, which is conducive to
environmental protection. JDB (500#SP) Self-lubricating bearings
are used in a wide range of applications as part of the machinery
industry. In order to make the mechanical transmission run
normally, a lot of effort was put into it. The bearings are divided
into rolling bearings and plain bearings. General sliding bearings
can cause naps in high load motions, foreign matter mixing,
temperature conditions, oil supply, and imperfect maintenance.
Under the harsh conditions in which ordinary plain bearings cannot
be used, the solid-inlaid type metal self-lubricating bearings are
used to achieve the performance required for bearings in terms of
wear resistance and pull resistance, and to achieve
high-performance of the machine and maintenance-free maintenance.
Product Parameter:
| Performance | JDB-1 | JDB-2 | JDB-3 | JDB-4 | JDB-5 |
|---|---|---|---|---|---|
| Density | 8 | 8.9 | 7.8 | 8.9 | 8 |
| Hardness HB | ≥ 210 | ≥ 70 | ≥ 150 | ≥ 75 | ≥ 235 |
| Tensile strength N/mm² | ≥ 750 | ≥ 250 | ≥ 500 | ≥ 270 | ≥ 800 |
| Yield Strength N/mm² | ≥ 450 | ≥ 90 | ≥ 260 | ≥ 150 | ≥ 450 |
| Elongation rate % | ≥ 12 | ≥ 13 | ≥ 10 | ≥ 5 | ≥ 8 |
| Linear expansion coefficient | 1.9×10-5/℃ | 1.8×10-5/℃ | 1.6×10-5/℃ | 1.8×10-5/℃ | 1.9×10-5/℃ |
| Operating temperature | -40~+300℃ | -40~+400℃ | -40~+400℃ | -40~+400℃ | -40~+300℃ |
| Maximum dynamic load N/mm² | 100 | 60 | 50 | 70 | 120 |
| Maximum line speed (dry) m/min | 15 | 10 | 20 | 10 | 15 |
| Maximum PV (Lubrication) N/mm²·m/s | 200 | 60 | 60 | 80 | 200 |
| Compression deformation 300 N/mm² | ＜ 0.01 | ＜ 0.05 | ＜ 0.04 | ＜ 0.05 | ＜ 0.005 |
Picture Display:
Q1: Are you a factory
A1: Of course.
Q2.Do you have certificate?
A2:Our company has achieved ISO9001, CE certification.
Q3: How about the delivery time?
A3: Our production period is normally 10-20 days after receiving
advance payment. For some standard model, we can delivery
immediately if we have goods in stock.
Q4: Can we print the LOGO on products?
A4: Yes, OEM is available with the permission of our customers.
Q5: What is your payment term?
A5: T/T or L/C, if you want other payment terms, please contact us.
Solid Inlaid Bearing Wear Resistant Metal High Load, Impact Resistance, And Non Metallic Low Coefficient
Inquiry Cart
0