Add to Cart
Wheel base(mm) | 3900+1350 | |
Kerb Weight (kg) | 12150 | |
GVW (kg) | 25000 | |
Overall dimension (mm) | 8480x2495x3360 | |
Driving position | Left or Right hand drive available | |
Dump box dimension(mm) | 16 cubic meters, 5800*2350*1200 , front lifting, bottom 6mm side
4mm, with HYWA hydraulic system | |
CAB | ||
Type | CAMC Classic flat roof Cab | |
Color | Standard color: red, yellow, blue, white; others: optional but
charge | |
Parameter | With one berth、Berth curtain、Leather 4-spoke Steering Wheel、Rear
window、electronic and Hydraulic reversal cab、power window, hydraulically damped adjustable driver’s seat and rigid adjustable co-driver’s seat, heating & ventilation system, adjustable roof flap, with stereo radio and MP3, and adjustable steering wheel, air horn, single berth with 4-point support fully floating suspension and shock absorber with transverse stabilizer, safety belt. | |
Others | A/C, radio,MP3, one sleeper, curtain etc. | |
ENGINE | ||
Supplier | CAMC—The Chinese most advanced truck Engine Producer | |
Model | CM6D28.420 31 | |
Type | Four-stroke, water-cooled, in-line, wet-liner, direct-injection | |
Maximum power/horsepower(kw/hp) | 309/420 | |
Maximum rated speed(rpm) | 1900 | |
Max torque(N.m/rpm) | 1930/1250 | |
Cylinders | 6 | |
Bore x Stroke (mm) | 128*153 | |
Displacement (L) | 11.81 | |
Controller type | Mechanical | |
Air cleaner | Dry paper element | |
Emission Standard | Euro II | |
TRANSMISSION | ||
Supplier | CAMC (same level as ZF technology) | |
Model | 9SDB2051A (5.263) | |
Type | Mechanical & manual with servo & Synchronizer & creep | |
Speed ratio | 9 forward ratio: 15.49, 12.07,8.35,5.67,4.07,2.96,2.05,1.39,1.00 1 reverse ratio:14.19 | |
CLUCH | ||
Type | Single- plate dry diaphragm spring clutch, diameter 430(A) mm,
hydraulically operating with air assistance | |
Plate diameter | 430mm | |
STEERING SYSTEM | ||
Driving position | Left or Right hand drive available | |
Type | hydraulic steering with power assistance | |
Ratio | 22.2-26.2:1 | |
Axle | ||
Supplier | CAMC | |
Front axle | CAMC technology steering axle with double T-cross section, Rated
capacity:7.5T | |
Rear axle | CAMC technology 16T casting axle , with double reduction and
differential locks between axles, Rated capacity:16T ratio:5.263 | |
Frame | ||
Type | U-profile parallel ladder with section and reinforced subframe, all
cold riveted cross members | |
Size (H*W*t) | Height:310m, Width:90mm, Thickness:8mm+8mm (Double) | |
Width (front/rear) | 976mm/856mm | |
Suspension | ||
Front suspension | 9 semi-elliptic leaf springs with hydraulic telescopic
double-action shock absorbers and stabilizer | |
Rear suspension | 12 semi-elliptic leaf springs with bogie spring and stabilizer | |
BRAKING SYSTEM | ||
Type | Drum braking | |
Service brake | dual circuit compressed air brake | |
Parking Brake (emergency brake) | spring energy, compressed air operating on rear wheels | |
Auxiliary braking | engine exhaust brake and ABS | |
Electrics | ||
Operating voltage | 24V | |
Starter | 24 Volt/7.80kw | |
Alternator | 3-phrase, 28V, 1540W | |
OTHERS | Cigar-lighter, horn, headlamp, fog light, brake light | |
Dimensions(mm) | ||
Front wheel track | 2065 | |
Rear wheel track | 1860 | |
Front overhang | 1370 | |
Rear overhang | 1660 | |
other Weight(KG) | ||
Front axle loading capacity | 7500×1 | |
Rear axle loading capacity | 16000×2 | |
Performance | ||
Maximum driving speed(km/h) | 72.81 | |
Maximum gradeability (%) | 35 | |
Minimum ground clearance(mm) | 320 | |
Minimum turning radius(m) | 7.02 | |
Fuel consumption(L/100km) | 35 | |
Approach angle(o) | 24 | |
Departure angle(o) | 23 | |
TYRE | ||
Type | 12.00R20 steel tire, 10+1 pieces | |
FUEL TANK | ||
Type | 400L iron / aluminium alloy tank | |
OTHERS | ||
Warranty | 12 months unlimited mileages or 100000km which occur first | |
Lead time | 35 working days |