43501-01-04-01 Bently Nevada Low Pressure Cable Seal With 1/2-14 NPT
Brand Name:Bently Nevada
Certification:CE
Model Number:43501-01-04-01
Minimum Order Quantity:1pc
Delivery Time:12-16weeks
Payment Terms:T/T
Contact Now
Add to Cart
Verified Supplier
Location:
Hong kong China
Address:
Unit 1406B 14/F，The Belgian Bank Building, Nos. 721-725 Nathan Road, Mongkok, Kowloon,Hong kong.
Supplier`s last login times:
within 39 hours
Product Details
Company Profile
Product Details
43501-01-04-01 Bently Nevada Low Pressure Cable Seal
The 43501 Low Pressure Cable Seal provides a means to pass through a single hole in a machine case or other barrier one to four 95-ohm transducer cables or one to two 25mm DE and 50mm DE transducer cables. A molded silicone rubber grommet provides a seal to prevent leakage of fluids along the outer jacket of the cable(s).The seal mounts in a hole tapped with either ½-NPT or ¾-NPT pipe threads in the machine and has external pipe threads on both ends to mate to the tapped hole and to mating conduit or housings.
The seal is rated to 345 kPa (50 psi) across grommet high pressure to low pressure.The seal is rated only on the cable outer jacket and seal body itself. It does not seal leaks through the cable braid or center conductor due to pinholes or cuts in the cable jacket or through the probe or connector. The primary intended usage is to seal lube oil to exit bearing housings and machine cases.
The seal is rated to 1.0 psi absolute, but is limited in practice by the cable, probe, and connector as with pressure.
Ordering Information
43501-AXX-BXX-CXX | |
A: High Pressure Side Thread Size | |
0 1 | 1/2-14 NPT |
0 2 | 3/4-14 NPT |
B: Cable Grommet and Washer | |
0 0 | Solid grommet (no holes). Holes must be punched in grommet. |
0 2 | Grommet will accommodate up to two 25mm and 50mm DE cables. One hole is punched and one is partially pre-drilled |
0 4 | Grommet will accommodate up to 4 cables. One hole is punched and three are partially pre drilled. |
C: Low Pressure Side Thread Size | |
0 1 | 1/2-14 NPT |
0 2 | 3/4-14 NPT |
43501-01-04-01 Bently Nevada Low Pressure Cable Seal With 1/2-14 NPT
Inquiry Cart
0