Add to Cart
ACMER P2 Laser Engraver Ultra High Engraving Speed And Automatic Air Assist System
Looking for a reliable and efficient laser engraving and cutting machine for wood? Look no further than the ACMER P2 33W Laser Engraver and Cutter Machine. With its ultra high engraving speed of 30000mm/min and automatic air assist system, this machine is perfect for wood engraving and cutting enthusiasts and hobbyists alike.
The ACMER P2 33W Laser Engraver and Cutter Machine boasts a solid structure and smooth operation, making it easy to use and maintain. It supports 10W/20W/33W/48W laser modules and can fine-tune focus while the machine is working, ensuring precise and accurate engraving and cutting results. With its fully upgraded safety protection functions including flame detection alarm, tilt alarm and stop, alarm indicator light, emergency stop safety button, key lock for children, and enhanced safety, you can rest assured that you and your loved ones are safe while using this machine.
This laser engraver and cutter machine also comes with a laser protection filter, which can filter 97% of ultraviolet rays. The safety flame detector that can be switched can prevent false alarms in the strong light link. Additionally, it has a rich accessories ecology and can be used with rotary modules to carve curved surface materials. Its rotary module switch can be switched independently to avoid repeated plugging and unplugging of wires, and it comes with a standard configuration of a super quiet and long-life air-assisted air pump that is very suitable for engraving scenes. For those needing to cut thicker materials, an optional upgrade to the ACMER C4 30L/min air-assisted air pump is available.
ACMER P2 Laser Engraver and Cutter Machine is perfect for wood engraving and cutting enthusiasts and hobbyists, as well as small business owners. It can be used to create custom home decor, personalized gifts, and even small business products such as wooden signs and labels. Its high precision and accuracy make it ideal for intricate designs and patterns, and its automatic air assist system ensures smooth and consistent results every time.
Q: Can the ACMER P2 33W Laser Engraver and Cutter Machine engrave
wood?
A: Yes, the ACMER P2 33W Laser Engraver and Cutter Machine is
perfect for wood engraving and cutting.
Q: Whatis the maximum cutting thickness for this machine?
A: The maximum cutting thickness for the ACMER P2 33W Laser
Engraver and Cutter Machine is 10mm, but this may vary depending on
the type of material being cut.
Q: Do you sand after laser engraving?
A:After engraving, it is recommended to lightly sand the surface
and then apply your final finish coats, which will seal the
engraving. However, it's important to avoid over-sanding as it may
damage the finer details of the engraving. Once the finishing is
complete, you have the option to either leave the engraved area in
its natural laser-engraved color or color-fill the engraved areas
according to your preference.
Q:Is laser engraving hard to do?
A:Laser engraving is a surprisingly accessible skill to acquire. It
can be a rewarding hobby to pursue, and once you become proficient
in operating the machine, you might even contemplate starting your
own small-scale laser engraving business.