Pump Inverter VFD 380v 3phase 2.2kw Variable Speed Drive 3hp Vsd for fan pump
Brand Name:ZONCN
Certification:CE
Model Number:T200
Minimum Order Quantity:1
Delivery Time:within 15 days
Payment Terms:T/T, Paypal
Contact Now
Add to Cart
Verified Supplier
Location:
Wuhu Anhui China
Address:
BLDG 16, #29 Rongyue Dongfang, Guandou Street, Jiujiang District, Wuhu City, Anhui Province
Supplier`s last login times:
within 27 hours
Product Details
Company Profile
Product Details
Pump Inverter VFD 380v 3phase 2.2kw Variable Speed Drive 3hp Vsd for fan pump
ZONCN T200 Inverter Specification
| ITEM | T200 Inverter | |
| Basic function | Maximum frequency | 0～600.00Hz |
| Carrier frequency | 0.5kHz～16kHz | |
| The carrier frequency can be automatically adjusted based on the load features. | ||
| Input frequency resolution | Digital setting:0.01Hz | |
| Analog setting: maximum frequency×0.025% | ||
| Control mode | Voltage/Frequency control (V/F) | |
| Sensorless flux vector control (No PG) | ||
| Closed loop vector control (Have PG) | ||
| Startup torque | G Type:0.5Hz/150%(No PG)； | |
| P Type:0.5Hz/100% | ||
| Speed range | 1:100(No PG) | |
| Speed stability accuracy | ±0.5%(No PG) | |
| Torque control accuracy | ±5%(Have PG) | |
| Overload capacity | G type: 60s for 150% of the rated current, 3s for 180% of the rated current. | |
| P type: 60s for 120% of the rated current, 3s for 150% of the rated current | ||
| Torque boost | Fixed boost | |
| Customized boost 0.1%–30.0% | ||
| V/F curve | Straight-line V/F curve | |
| Multi-point V/F curve | ||
| N-power V/F curve (1.2-power, 1.4-power, 1.6-power,1.8-power, square) | ||
| V/F separation | Two types: complete separation; half separation | |
| Ramp mode | Straight-line ramp | |
| S-curve ramp | ||
| Four groups of acceleration/deceleration time with the range of 0.0–6500.0s | ||
| DC braking | DC braking frequency: 0.00 Hz to maximum frequency | |
| Braking time: 0.0-100.0s | ||
| Braking action current value: 0.0%–100.0% | ||
| JOG control | Jog frequency range:0.00Hz~50.00Hz. JOG acceleration/deceleration time0.0s~6500.0s. | |
| Onboard Multiple preset speeds | It implements up to 16 speeds via the simple PLC function or by input terminal states | |
| Onboard PID | It realizes process-controlled closed loop control system easily. | |
| Auto voltage | It can keep constant output voltage automatically when the mains voltage changes. | |
| regulation (AVR) | ||
| Over-voltage/ | The current and voltage are limited automatically during the running process so as to avoid frequent tripping due to over-voltage/over-current. | |
| Over-current stall | ||
| control | ||
| Rapid current limit | It helps to avoid frequent over-current faults of the inverter. | |
| Torque limit and torque control | It can limit the torque automatically and prevent frequent over-current tripping during the running process. | |
| Individualized function | High performance | Control of asynchronous motor is implemented through the high-performance current vector control technology. |
| Instantaneous stop doesn’t stop | The load feedback energy compensates the voltage reduction so that the AC drive can continue to run for a short time. | |
| Timing control | Timing range 0.0Min～6500.0Min | |
| Communication methods | RS-485 | |
| Operation | Running command channel | Given by the panel, control terminals, |
| Serial communication port, can be switched by many ways | ||
| Frequency source | 10 kinds of frequency source, given by digital analog voltage, analog current, Pulse, serial port. can be switched by many ways | |
| Auxiliary frequency source | There are ten auxiliary frequency sources. It can implement fine tuning of auxiliary frequency and frequency synthesis | |
| Input terminals | 5 digital input terminals, one of which supports up to 100 kHz high-speed pulse input; | |
| 1 analog input terminal, supports 0-10V voltage input or 4–20 mA current input. | ||
| Output terminal | 1 digital output terminal | |
| 1 relay output terminal | ||
| 1 analog output terminal :that supports 0–20 mA current output or 0–10 V voltage output | ||
| Display and operation panel | LED display | It displays the parameters. |
| Key locking and | It can lock the keys partially or completely and define the | |
| function selection | function range of some keys so as to prevent mis-function. | |
| Protection mode | Motor short-circuit detection at power-on, input output phase loss protection, over-current protection, over-voltage protection, under voltage protection, overheat protection and overload protection. | |
| Environment | Installation location | Indoor, avoid direct sunlight, dust, corrosive gas, combustible gas, oil fog, steam, drip or salt. |
| Altitude | Lower than 1000 m(Lower the grades when using higher then 1000m) | |
| Ambient temperature | -10°C ～40°C (Lower the grades if the ambient temperature is between 40°C and 50°C) | |
| Humidity | Less than 95%RH, without condensing | |
| Vibration | Less than 5.9m/s2(0.6g) | |
| Storage temperature | －20℃~＋60℃ | |
ZONCN T200 Inverter Introduction
| Inverter Model | Input voltage | Rated output power (KW) | Rated input current(A) | Rated output current (A) | Motor power (KW) |
| T200-0R4G-2 | 1PH AC 220V+/-15% | 0.4 | 5.4 | 2.1 | 0.4 |
| T200-0R75G-2 | 0.75 | 7.2 | 3.8 | 0.75 | |
| T200-1R5G-2 | 1.5 | 10 | 7.2 | 1.5 | |
| T200-2R2G-2 | 2.2 | 16 | 9 | 2.2 | |
| T200-3R7G-2 | 3.7 | 23 | 13 | 3.7 | |
| T200-0R4G-4 | 3PH AC 380V+/-15% | 0.4 | 3.4 | 1.5 | 0.4 |
| T200-0R75G-4 | 0.75 | 3.8 | 2.1 | 0.75 | |
| T200-1R5G-4 | 1.5 | 5 | 3.8 | 1.5 | |
| T200-2R2G-4 | 2.2 | 5.8 | 5.1 | 2.2 | |
| T200-3R0G-4 | 3 | 8.5 | 7.2 | 3 | |
| T200-3R7G/5R5P-4 | 3.7/5.5 | 10/15 | 9/13 | 3.7/5.5 | |
| T200-5R5G/7R5P-4 | 5.5/7.5 | 15/20 | 13/17 | 5.5/7.5 | |
| T200-7R5G/11P-4 | 7.5/11 | 20.0/26.0 | 17/25 | 7.5/11 | |
| T200-11G/15P-4 | 11/15 | 26/35 | 25/32 | 11/15 | |
| T200-15G/18.5P-4 | 15/18.5 | 35/38 | 32/37 | 15/18.5 | |
| T200-18.5G/22P-4 | 18.5/22 | 38/46 | 37/45 | 18.5/22 | |
| T200-22G/30P-4 | 22/30 | 46/62 | 45/60 | 22/30 | |
| T200-30G/37P-4 | 30/37 | 62/76 | 60/75 | 30/37 | |
| T200-37G/45P-4 | 37/45 | 76/92 | 75/90 | 37/45 | |
| T200-45G/55P-4 | 45/55 | 92/113 | 90/110 | 45/55 | |
| T200-55G/75P-4 | 55/75 | 113/157 | 110/152 | 55/75 |
FAQ:
Q1, Are you a manufacturer or a trade company?
A. We are a professional VFD Inverter factory since 2005 that focus on producing inverter for 19 years.
Q2, This T200 inverter series support NPN and PNP?
A. Yes.
Q3, This T200 series inverters are made of IGBT?
A. Yes, we can produce from 0.4kw to 55kw, all made of IGBT.
Q4. Do you provide any technical support?
A. Sure, you can freel free to use this T200 series inverter, if there is any questions, pls feel free to let me know. Our technology person will support you.
Pump Inverter VFD 380v 3phase 2.2kw Variable Speed Drive 3hp Vsd for fan pump
Inquiry Cart
0