4 wheel drive backhoe loader can be used on farms,municipal works,small projects and so on.The front of our 4 wheel drive backhoe loader is a loading bucket and the rear is a backhoe bucket.And our backhoe loader is 4 wheel drive.Besides the places that the backhoe loader can be used,our 4 wheel drive backhoe loader equipped with hydraulic breaking hammer can be used to break building concrete, boulders,concrete roads and railway etc.The type of our hydraulic breaking hammer is saw point type with durability and high efficiency.Also the hammer will be put on the excavator of our backhoe loader and after breaking concrete,boulders and rocks,the operator can use the loading bucket to shovel the stone or concrete away which is one of the advantages of our 4 wheel drive backhoe loader.Here is the specification:
| Overall dimension | Operating Weight | 8200KG |
| Overall dimension(L×W×H) | 6050×2465×3100mm | |
| Wheel base | 2280mm | |
| Wheel tread | 1785mm | |
| Ground Clearance | 300mm | |
Performance | Loader bucket capacity | 1.0m³ |
Loader breakout force | 47KN | |
Loader lifting capacity | 2500KG | |
Loader dumping height | 2760mm | |
Loader dumping reach | 900mm | |
Loader digging depth | 52mm | |
Backhoe bucket capacity | 0.3m³ | |
Backhoe bucket digging force | 50KN | |
Backhoe swing angle | 180° | |
Backhoe dumping height | 3795mm | |
Backhoe max digging depth | 4085mm | |
Max. traction force | 60KN | |
Engine | Model | Yuchai YC4A105Z-T20 |
Type | Turbocharging four-stroke | |
Cylinder-inner diameter*stroke | 4-108×132 | |
Rated power | 75KW/100HP | |
Rated speed | 2200r/min | |
Min. Fuel consumption | 230g/kw.h | |
Max.torque | 400N.m | |
Displacement | 4.8L | |
| Steering system | Type | Hydraulic Steering |
| Diverter model | BZZ5-250 | |
| Pump delivery | 63ml/r | |
| Steering angle | ±36° | |
| Min. turning radius | 6581mm | |
| Driving axle | Model | WZZ75D |
| Manufacturer | China axle | |
| Max. load of front axle | 22.5 ton | |
| Max. load of rear axle | 18.5 ton | |
| Transmission | Gearbox | Mechanically Operated Hydraulic Synchrinized Shift |
| Model | ZL15 | |
| Gears | 2 forward and 2 reverse gears | |
| Hydraulic torque converter | YJ290 | |
| Inlet pressure | 0.4-0.65Mpa | |
| Outlet pressure | 1.5-1.8Mpa | |
| Cooling mode | oil-cooling presssure circulation | |
| Pump delivery | 40ml/r | |
Wheel | Front wheel size | 14-17.5 |
Rear wheel size | 19.5L-24 | |
Front tire pressure | 0.4Mpa | |
Rear tire pressure | 0.35Mpa | |
Travel speed | 24Km/h | |
| Brake system | Service brake | Air over oil caliper, external, self-regulation, self-balance |
| Parking brake | Manual brake | |
| System pressure | Loading hydraulic system | 19Mpa |
| Digging hydraulic system | 19Mpa | |
Steering hydraulic system | 14Mpa |
