Home /Steel Wire /

Home Furniture Sofa Pocket Spring 1.8mm High Carbon Steel Wire

Home Furniture Sofa Pocket Spring 1.8mm High Carbon Steel Wire

Brand Name:Yirilom
Certification:SGS/ISO9001
Model Number:MTT-054
Minimum Order Quantity:200PCS
Delivery Time:7-15 Days
Payment Terms:L/C, T/T, Western Union, MoneyGram
Contact Now

Add to Cart

Verified Supplier
Location: Foshan Guangdong China
Address: Fuwan Industrial Area, Gaoming District, Foshan City, Guangdong, China
Supplier`s last login times: within 31 hours
Shipping
lt's easy to get a shipping quote! Just click the button below and complete the short form.
Get Shipping Quote
Product Details Company Profile
Product Details

Used For Home Furniture 1.8mm High Carbon Steel Wire 10cm Height Sofa Pocket Spring


How To Replace Upholstery Springs?


Upholstery springs are probably not what you think. Instead of the old-fashioned vertical coils that you might

imagine them to be, upholstery springs are flat, coiled steel wires that run horizontally across the seat. The

snake-like sidewinder coils of the spring open and close to provide the cushioning effect. Over time, this type

of spring loses tension, causing the seat to sag. You can replace them using a few ordinary tools.


1. Put on gloves. Turn the chair, sofa or bench upside down. Use a staple puller to remove staples securing a

lightweight fabric to the bottom of the seat. Remove staples from one side only. Fold the fabric up and out of the

way to expose the springs.

2. Use a screwdriver to pry small metal clips from staples holding them secure to the seat. The springs are hooked

through clips on both sides. Tap the screwdriver with a hammer to drive the tip of the screwdriver under the clip, and

then pry the clips off one at a time. Remove the springs by sliding the loose end of the spring out of the circular hook

on the clip. Remove all of the broken or bent staples using diagonal pliers.

3. Pry off the clips and springs from the other side the same way. Remove the springs from the seat. Remove the

clips from the springs.

4. Take one of the springs to an upholstery shop where you can purchase replacement springs of the same type and

length.

5. Screw the clips back onto the seat using a drill/driver and 3/4-inch screws. Use the original staple holes as pilot

holes for the new screws.

6. Hook one end of the new spring into the circular hole in the clip. Hook all of the springs on one side only, allowing

the other ends to hang down.

7. Grasp the spring with a gloved hand. Stretch and pull the spring toward your body. Hook the end of the spring

into the corresponding clip and release the tension on the spring. Stretch and hook each individual spring the same

way.

8. Stretch the lightweight fabric back in place over the springs. Use an upholstery staple gun with 1/4-inch, wide-

crown staples to secure the fabric back into place.

Things You Will Need

Gloves

Staple puller

Screwdriver

Diagonal pliers

Drill/driver

3/4-inch screws

Clamp (optional)

Upholstery staple gun

1/4-inch staples

Tip:If you're having trouble stretching the springs, hook the jaw of a clamp on one of the spring coils, and hook

the other end onto the side of the seat. Tighten the clamp to stretch the spring and then hook it onto the

corresponding clip.

Warning

Steel springs may have sharp ends that can cut skin. Use caution when handling. Wear eye protection and

gloves.

Product Description

Product NameSofa Pocket Spring
MaterialHigh Carbon Steel Wire
Wire Diameter1.0mm-2.3mm
Head Diameter4-6.5cm
Middle Diameter4.5-7.5cm
Height6-25cm
Turns4-7Turns
Coils CountsAccording to the demand of clients
MOQNegotiate
Woven Fabric65-100g/㎡Or Can Be Customized
SizeAny Size Available
ColorWhite, Blue Or Customized
PackingCompressed And Rolled
ApplicationFor Sofa Factory/Manufacturer

About Us


China Home Furniture Sofa Pocket Spring 1.8mm High Carbon Steel Wire supplier

Home Furniture Sofa Pocket Spring 1.8mm High Carbon Steel Wire

Inquiry Cart 0