100kw Diesel Generator Sets Brushless Water-Cooled Genset with Base Fuel Tank Y100

Standard configuration:
Industrial water-cooled diesel engine
Single bearing drip-proof generator, IP22 protection, insulation class H
40ºC ambient temperature radiator, double layer heat dissipation
Electric start.
Standard air filter
Outlet switch
Steel base with anti-vibration pad
Muffler
Battery
Air switch cabinet (manual)
User operation manual
Note:
1. The units are of integral structure, and all parts are firmly installed on the strong base channel steel.
2. Ensure no oil leakage, water leakage and other undesirable phenomena.
3. direct injection generator set in the altitude of less than 1000 meters, no correction power; 1000-3000 meters between, every 500 meters up, correction 4%, 3000-5000 meters between, every 500 meters up, correction 6%.
4. The external dimensions and weight of the unit are subject to the actual product

2. About shipping: Buyer to pay a deposit, the deposit to the account after the preparation of goods, the final payment before delivery.
3. On the warranty: the machine warranty of one year, except for wear and tear parts, and human misuse. Lifetime cost repair.
4. On the price: because it is factory direct sales, without any sales markup, so our prices are uniformly advantageous! Quality is also always guaranteed.

How to extend the service life of diesel generators? (How to make better maintenance of diesel generators?)
1,Check every day before starting the engine.
2,Engine crankcase oil consumption.
3,Coolant level: radiator and intercooler core electricity are not blocked.
4,Air filter is not blocked.
5,Check every 50 hours.
6,Battery and fluid level: Exclude water leakage, fuel leakage and oil leakage.
7,Every 250-300 hours: change the engine oil, replace the oil filter and bypass oil filter, replace the fuel filter, discharge the fuel tank oil when needed, and tighten the triangle tape.
8, check the radiator and air-cooled intercooler core electricity is not blocked, whether the need to clean, check the air ducts and their hose joints should be no bad parts and new tighten the clamps, check the oil into and out of the increaser should not leak.
9, every 1200 hours, ask professionals to check and adjust the valve clearance, check and adjust before the engine stop and cold state, every 2400 hours, ask professionals to fold and check and adjust the injectors, by professionals to check the working condition of the supercharger, and the engine and generator parts for routine inspection, every 6 months, replace the coolant filter, every year, clean the cooler, replace the coolant.