Product Description
INTRODUCTIONSeries 190 inner mixing gas engine is developed by our company to
meet the requirement of market. The whole engine is optimized by
amending the shortages of the first gas engine generation. The
power performance, fuel economy and reliability of this gas engine
are improved a lot by adopting inner mixing mode, increasing
compression ratio and boost ratio, enhancing swirl rat io,
realizing lean -burnt by controlling air fuel ratio, using
high-energy ignition, and etc.
This engine series is mainly used in generating by single engine or
several engines forming a power station. It also can be used as
power of compressor, oil t ransfer pump, water in jection pump, and
etc.
MAIN FEATURESEngine Design- Designed by AVL, Austria
- Intellectual Property belong to JCPC
- Longer Stroke, More displacement
- Low Speed (1200RPM), More Reliable
- Advanced World Standard Performance
Generator - Brushless Excitation -AVR- Better Insulation and Protection
Safety- Low Oil Pressure Auto Stop Protection
- Over Speed Auto Stop Protection
- Exp losion Proof
- High Coolant Temperature Alarm
- Low Coolant Level Alarm
- High Oil Temperature Alarm
- Complete Electrical Protection
- Emergency Stop Device
| Testing- Strict Inspection and Factory Test for Each Gen-set
- Start Performance Test
- Load Test
- Synchronization Test
- Safety System Test
The Whole Equipment Supply- Standard Scope of Supply
- Optional Equipment List
- Repairing Tools
- Spare Parts
- Meet the Requirement for All Accessories of Project
Easy Installation and Remove- All Equipment on Common Skid Three -Point Support
-Simple Installation Work- High Strength Skid, for Hoisting and Removing.
Technic al Support & Ser vices- Free Technical Support and Training Service
- 24/7 Technical Service Tel Number
- Rapid Spare Parts Supply
- After Sales Service for Generator Set Lifetime
|
Property Parameter TableModel | 500GF-T1 |
Engine type | G12V190ZLDT1-2 |
Alternator type | 1FC series(SIEMENS technology) |
Rated Power * kW | 500 |
Rated Speed rpm | 1200 |
Rated Frequency Hz | 50 |
Rated Voltage V | 400/230 |
Rated PF | 0.8 |
Vo ltage Regulation | AVR |
Cooling Method | Closed cooling |
Weight kg | 13800 |
Dimension mm | 6200x2330x2776.5 |
Detailed Photos
*Rating and fuel consumption based on ISO Standard conditions
(Ambient temperature at 25 degree Centigrade, Atmospheric pressure
at 100kPa andRelative humidity at 30%). Site rat ing and fuel
consumption should amend according to relative standard (The table
at right side for reference )
Main Specification of EngineModel of engine | G12V190ZLDT1-2 |
Rated Power(kW/KVA) | 500kw/625kvA |
Rated Speed(r/ min) | 1200 |
No. and layout of cylinders | 12-cylinder,60°Vee |
Type | Four stroke, Water cooled, Direct in jection, Air-fuel ratio
control, Spark plug ignition, Out mixing, Electrical control, Mixed after compressor, Turbocharged and
aftercooled. |
Heat consumption | ≤11386kJ/kW·h |
Specific oil consumption (g/kW.h) | ≤1.63 |
Bore(mm) | 190 |
Stroke (mm) | 215 |
Total displacement (L) | 73.15 |
Governor | Electronic Governor |
Exhaust temperature (before turbo) | ≤680ºC |
Starting mode | 24V DC electric starting motor |
Direction of rotation | Counter-clockwise(facing to flywheel) |
Lubrication method | Pressure and splash lubrication |
Hot water outlet temperature | <90ºC |
Mid-cooler inlet water temperature | <45ºC |
Oil temperature | <90ºC |
Stable regulating rate | 0~5 % adjustable |
Oil brand | Mobil Pegasus MOBIL610 |
Cooling method | Forced water cooling |
Manufacturer | CNPC Jichai Power Co., Ltd |
Main Specification of AlternatorModel of alternator | 1FC series(siemens technology) |
Rated power(kW) | 500 |
Rated voltage(V) | 400 |
Coupling | Elastic |
Voltage regulator | 3 phase sensing with volts/60Hz. |
Voltage regulation | Less than +/-0.5% in steady stat60e and less than +/- 0.5% with 3%
speed change. |
Rated voltage | 480 V |
Rated frequency | 60Hz |
Power factor | COS¢=0.8 |
Efficiency | 93.5 % |
Wiring mode | Three-phase four-wire system(Y) |
Excitation mode | Brushless excitation |
Insulation class | F |
Running mode | Continuous |
Protective class | IP23 |
Cooling mode | Fans self-ventilation |
Weight | 2700kg |
Rotary inertia | 19kgm2 |
Altitude | ≤1000m |
Rotating direction | Anticlockwise(Facing to input end) |
Generator outline direction | Right(Facing to shaft stretch direction) |
STANDARD SCOPE OF SUPPLYNatural Gas Engine Air inlet system Air filter Air cooler Bracket Control system Run/Auto/Stop control Governor Mechanic instrument Control Panel Explosion Proof Safety protection system Exhaust system Exhaust gas turbocharger Exhaust manifold | Electric Starter 24 Volt Lubricating System Main oil pump Lube oil filter Lube oil cooler Lube oil Centrifugal filter Cooling System Cooling fan and Driven device Level gauge Alternator Brushless excitation alternator AVR(digital mode) Spares Normal repair tools Special spare parts |
Corrugated pipe Exhaust pipe Exhaust elbow Exhaust silencer Starting System DC starting motor | Technical document Others Common skid Elastic coupling |
Jinan Guohua Green Power Equipment Co.,Ltd(JNGH),is a high-tech
sales &service company of Jinan Diesel Engine Co., Ltd.
Established in 2010,JNGH has formed a complete system in sales and
after-sales of 190 series engine(jichai
brand:6L190,8V190,12V190.16V190) after eight years experience.
Main business scope:
Early stage:Consultation,designation, supply and erection of
engine-based power plants,including diesel generator,natural gas
generator,coal gas generator and biogas generator.
Mid stage:Parts supply of jinan diesel engine(jichai/chidong
brand).JNGH has two warehouses.One located in Jinan which supply
the domestic north and south market.One located in Xinjiang
province which supply the west market.Thus could delivery parts
fast and guarantee the quality.
Later stage:JNGH also offer engine overhaul and maintenance
service.With experienced engineer and professional skills,the
problems could be easy solved.Not only the domestic
China,Ghana,Kazakhstan,Vietnam and Myanmar also could see the trace
of JNGH.
12VB.05.10.04/05 connecting rod bearing
12VB.01.23A/24A UPPER/LOWER MAIN BEARING METAL
12VB.01.21A/22A LOWER/UPPER THRUST MAIN BEARING
12VB.01.34 CAMSHAFT BEARING
12VB.01.25A THRUST PLATE
12VB.05.09C-GJ piston ring
12V.01.02C cylinder liner
12VB.03.80.05 SEAT,INLET VALVE
12VB.03.37A INLET VALVE
12VB.03.80.05 SEAT,EXHAUST VALVE
12VB.03.22 EXHAUST VALVE
12VB.03.19 SPRING SEAT,LOWER
12VB.03.15 SPRING SEAT,UPPER
Z12V.03.17A VALVE SPRING,INNER
Z12V.03.18A VALVE SPRING,OUTER
12VB.03.80.02 VALVE GUIDE
12VB.03.02 UPPER COCVER,CYLINDER HEAD
12VB.03.11 SEAL RING I
12VB.03.14E LOWER COVER,CYLINDER HEAD
12VB.03.12A SEAL RING II
601.01.25 THRUST PLATE
601.01.23/24 MAIN BEARING METAL
601.05.07/08 CONNECTING ROD BEARING
601.01.34 CAMSHAFT BEARING
B4012C.05.10.04/05 CONNECTING ROD BEARING
Contacts:Molly
Tel: +86 17862350837