26 kw Professional ISO Approved STR DR-30 Rice Husk Grain Dryer Paddy Corn Dryer Fuel Gas

Professional ISO approved STR DR-30 rice husk grain dryer paddy corn dryer

Grain is easy to mold in rain season or summer.This kind of dryer machine is to dry wheat, corn, rice and other grain materials by method of circulation,to ensure that the moisture content of grain can meet the safe storage or processing requirement.With lower temperature,the burst rate is very low.It is specially designed for long rice paddy.

Our dryer machines are of 10T, 15T, 20T, 25T, 30T,etc.

1. Fully automatic (automatic monitor over hot air, grain and moisture, automatic failure alarm); Automatic circulation, discharge and shutdown system;

2. The furnace can use coal, wood,biomass particles, crop straw, husk, petrol oil or gas, etc.

3. Lower cost. To reduce 5% moisture of 12 tons rice,it costs 11 usd if use coal as fuel, 6 usd if use husk(If your husk is free,the cost is only 2 usd ).

4. With good effect of grain.Vertical type dryer is a new design by adopting low temperature heating,which can keep original color and taste, shining surface,no sticky,low broken rate.

5.The feeding, circulation and discharge systems are combined with elevator.It has the characteristics of light weight and small area.

6. Use large spiral feeder, high strength nylon bucket, stainless steel board, wear-resisting, anti-deformation, durable and no hurt to grain.

7. With cleaning device, easy to remove grain remaining in case of mixture.

8. Easy installation, operation and maintenance

The dryer includes dryer machine,elevator,belt conveyor, electric control cabinet, stove.

After cleaned, the grain is sent to the storage section at the top of dryer by elevator. The material level meter controls the feeding to ensure that the equipment is always in full load to improve efficiency.The grain runs in reverse direction with hot air in dryer to realize the whole process of preheating, drying, reversing, drying and cooling, and finally discharged by the belt conveyor at the discharge section.The blower sends used hot air to the collector for purification,so the hot air can be recycled to save fuel consumption.

In the drying process, the drying speed should be controlled. If dried or the cooled too fast, the rice will be easily burst.To ensure the drying quality of rice, the drying speed should not be controlled below 1.5% per hour. In addition,lower hot air temperature is necessary.If the hot air temperature is 38~40 ^oC, the bursting rate is less than 2%.The bursting is not only related to the hot air temperature, but also to the initial moisture content of rice.

Established in 1937, our company has grown into China's oldest and most professional rice mill machines manufacturer.Nearly 2000 staffs work here.

We specialized in manufacturing all kinds of rice mill machines such as N series jet rice mill machine;SN,SN-A,SN-B series of double blower rice mill machine;LNT,LNT-X series of combined rice mill machine;MCHJ series of rice mill plant;LM24-2C,LJ-25 type rice huller;FT series of suction elevator;DT series elevator;combined cleaning and de-stoner,and so on.

Our brand products are Province Inspection Exemption Product.

Three "Best" is the core of our company:

1.Best Quality:with 82 years of experience

2.Best Price:This is due to mass production

3.Best Service:This is realized by dozens of years experience of our engineers.

Q1:How do you ensure the quality of your machines?

A1:Most of our QC workers have more than 20 years experience.All machines are tested before leaving the factory.

Q2:What if you lie to our money?

A2:If you worry,we can offer APG (Advanced Payment Guarantee).Bank of China will inform you that we are ready for APG first,then you make payment.Bank of China will provide APG once they get your money.

Q3:How about the installation and training of our workers?

A3:We will send engineers to your place before installation.

Q4:What is your leading time and delivering time?

A4:Normally it is 25 working days.In busy season,it will be longer.We will let you know the exact delivering date when contract.

Q5:What size of workshop we should build?How many land do we need?

A5:Once you confirm the machine model you will need,our engineers will design the drawing for you accordingly.

Q6:What is your warranty?

A6:It is at least 12 months or longer.

Q7:Can we put our machines bought from other suppliers in your container?

A7:Sure,Just let your supplier send the machines to our factory in advance.

Person:Linda

Skype:presmile1

Mobile/Whatsapp/Wechat:+86 18763375732

wechat website

We promise to give you a best experience of purchasing!