Cutting Unit For Repairing The Wear And Tear Of Alloy Roll Surface
Brand Name:Huaji
Minimum Order Quantity:1 set
Payment Terms:L/C, T/T
Product Name:Auxiliary Equipment
Feature:low power consumption
Key Selling Points:high efficiency
Contact Now
Add to Cart
Verified Supplier
Location:
Weifang China
Address:
Binhai Economic Development Zone, Weifang City
Supplier`s last login times:
within 25 hours
Product Details
Company Profile
Product Details
Cutting Unit product description
The cutting device consists of frame, motor, pulley, triangle belt, grinding wheel, left and right traveling device and front and rear traveling device, etc. It is mainly used for repairing the wear and tear of alloy roll surface. Compared with the old cutting device, it is characterized by high grinding hardness, simple structure, low cost and fast cutting speed.Cutting Unit working principle
When working, the cutting device is horizontally mounted on the roller crusher, parallel to the repaired roller surface, the motor drives the grinding wheel to rotate at high speed through the triangular belt and belt pulley, and then the front and rear walking device will slowly approach the grinding wheel to the roller surface until it contacts with the roller surface, and then the right and left walking device will automatically swing the grinding wheel according to the width of the roller surface to repair the roller surface, and repair it to the point that the grinding wheel leaves the roller surface, and then use the front and rear walking device to approach the grinding wheel to the roller surface slowly, until the repair is completed.Cutting Unit Technical Parameters
| number | Model | Maximum grinding width (mm) | Motor power (Kw) | Feed mode |
| 1 | QX-6 | 600 | 2.2 | manually operated |
| 2 | QX-9 | 900 | 2.2 | |
| 3 | QX-12 | 1200 | 2.2 | Manual or automatic |
| 4 | QX-16 | 1600 | 3 | |
| 5 | QX-20 | 2000 | 3 | |
| 6 | QX-24 | 2400 | 3 |
Cutting Unit For Repairing The Wear And Tear Of Alloy Roll Surface
Inquiry Cart
0