Scrap Production Line product description
Scrap steel crushing production line consists of chain plate
loading conveyor; heavy-duty shredder (optional equipment); scrap
steel crusher; vibrating discharging machine; finished material
belt conveyor; magnetic separation separator; PLC electrical
control and operating system; dust removal system; video monitoring
system, hammer changing device and so on.
This scrap steel crushing production line is suitable for the
crushing of waste light steel and thin materials, such as waste car
body (removing engine, gearbox, tires, etc.); tinplate (color steel
tiles, iron drums, cans, etc.); household appliances (removing
motors, compressors, shafts, etc.); bicycles, trucks, fences, and
similar life wastes; cans (paint drums, oil drums, chemical drums,
etc.); other steel scrap (such as density of less than 0.6 of the
package, the thickness of steel plate, steel plate ≤ 5mm, the
thickness of ≤ 5mm) ≤ 5mm steel plate, steel sections, steel
structural parts), etc.
Scrap Production Line working principle
When the scrap steel crushing production line works, refer to the
operating instructions in accordance with the sequence of opening
the electronic control system, start the equipment. Then use the
special loader (or grapple machine) will be light steel thin metal
waste, poured into the chain plate loading conveyor (or belt
loading conveyor), from the chain plate loading conveyor, sent to
the heavy-duty shredder for pre-crushing, crushing to the side
length of 400mm or so, by the semi-finished product belt conveyor
sent to the scrap steel crusher, the use of crushing hammer
high-speed powerful blow, shear, crushed to 50mm or so dense square
ball blocks It will fall into the vibrating discharger below, and
then fall into the belt conveyor to be sent to the magnetic
separation machine for separating, separating the non-magnetic
material, and then sent out by the waste belt conveyor, and the
iron and steel will be sent out by the finished material belt
conveyor.
This scrap steel crushing production line is equipped with dust
collection system, which is composed of cyclone dust collector and
bag type dust collector, and the dust collector is installed in the
inlet and outlet of heavy shredder, inlet and outlet of scrap steel
crusher, and the separation port of magnetic separation machine
respectively. First use the high negative pressure of the cyclone
dust collector high-power fan to collect the coarse particles in
the dust, and then use the high negative pressure of the bag-type
dust collector high-power fan to adsorb the fine particles in the
bag, and regularly and automatically vibrate to clean up the bag to
collect, to meet the national environmental standards.
This production line is equipped with monitoring system, the
operator will be the production process of important links at any
time to view, always observe the heavy-duty shredder, scrap steel
crusher feed, magnetic separation machine, dust collection system
operation, the use of PLC master control operating system at any
time to control all equipment start and stop, control, adjustment,
etc., always let the whole scrap steel crushing production line
running well.
The production capacity of this scrap steel crushing production
line can be designed according to the customer's requirements,
configured with different specifications and models of equipment, a
single production line can reach 1-50t/h.
Scrap Production Line Technical Parameters