Add to Cart
The double-roller plate rolling machine is mainly used for rolling cylindrical workpieces, which is fast in rolling, one-time forming, without leaving straight edges, and has high precision and high efficiency for rolling workpieces. One-key control, hydraulic pressing, simple operation and beautiful products. The working length is 2500mm, the power is 7.5KW, the thickness of the processing board is 0.2-6MM, and the machine size is 3.5 meters x 1.2 meters x 1.7 meters.
Double Roll Rolling Machine
The double-roller plate rolling machine is primarily utilized for
the cylindrical workpiece rolling process, which boasts rapidity in
execution, single-step formation without any residual straight
edges, and high precision and efficiency in workpiece rolling. It
features one-key control, hydraulic pressing mechanism, simple
operation interface and aesthetically pleasing end products. With a
working length of 2500mm and power output of 7.5KW, it can handle
processing board thicknesses ranging from 0.2 to 6MM while
occupying a space measuring at 3.5 meters x 1.2 meters x 1.7
meters.
Product parameters
Device name | Double Roll Rolling Machine |
Device model | LRM03 |
Maximum coil width | 1600mm |
Working length of roll surface | 1650mm |
Maximum coil thickness | 8mm |
Full load minimum roll diameter | Φ800mm |
Sheet yield limit | 6s≤245Mpa |
Upper roll diameter | 159mm (thick wall tube) |
Bottom roll diameter | 159mm (thick wall tube) |
Rolling speed approx. | 4m/min |
Top roller pressing speed | 30mm/min |
Main motor power | 7.5kW _ |
Effective working length | 2500mm |
Machinable sheet thickness | 0.2-6mm |
Machine size | 3.5M×1.2M×1.7M |