200 Wooden TPI Type Inward Water Micro Filtration Suitable for Various Applications

TPI type inward water micro filtration

Features:

1. The equipment are all made of stainless steel, corrosion resistance, compact structure, cover an area of an area small, easy installation .Can use direct expansion bolt, this equipment can not do groove. Inlet and outlet tubes are available.

2.The gate is inverted trapezoidal section, making the slag is not easy to jams mesh filters.

3.Controlled by control motor, according to the water flow can be to maintain the best working condition.

4.Special flusher device can brush away small amount of impurity on the surface of the paste on reseau, net tube after secondary rinse, can achieve the best effect of qing gate, at the same time set up a flusher, will be attached to mesh the dirt to wash.

Application:

The device can remove water inside diameter of 0.25 mm over the tiny particles. it most suitable for papermaking, tanning, slaughtering, wine and food, chemical fiber and textile etc sewage treatment field.

Working principle:

Ac speed regulating motor through a speed reducer drive reseau cylinder, sewage through the inlet valve into the tank, go by a buffer uniform box clapboard rise to filter the water. Water purification through reseau gap into the bottom of the barrel to the discharging, at the same time cleaning the reseau. Greater than reseau clearance impurities and fiber type of organic matter, by reseau,is blocked by reseau and another side is reseau of rotating cylinder. Through the unloader discharging Slag hopper, after processing the litter moisture content is lower than the original water equipment 30% ~ 50%. By filtering sewage flow out of the water tank and is discharged through drain.