Add to Cart
Product overview:
Automatic High Speed Rotary Tablet Press Machine Rotary Tablet Press High Speed Rotary Tablet Supplier
Technical parameters:
Model | GZPK-15 | GZPK-17 | GZPK-20 |
Capacity (Tablets/h) | 65000 | 75000 | 95000 |
No.of station | 15 | 17 | 20 |
Max.tablet diameter(mm) | 25 | 16 | 13 |
Max.irregular long axis(mm) | 25 | 18 | 16 |
Main.tablet diameter(KN) | 100 | 80 | 80 |
Pre-pressure(KN) | 12 | 12 | 12 |
Main.filling depth(mm) | 20 | 16 | 16 |
Dia.of.die(mm) | 38.1 | 30.16 | 24.01 |
Length of punch(mm) | 133.5 | 133.5 | 133.5 |
Tablet thickness range(mm) | 0.5-10 | 0.5-8 | 0.5-8 |
Total power(Kw) | 5.5 | ||
Overall weight(Kg) | 675 | ||
Overall diemensions(mm) | 680×650×1690 |
The machine may make technical improvements without prior notice, and the attached picture shows the options that may be offered.
Work flow:
Automaticity of system:
【 Centralized Lubrication system 】 | 【 Scrap system 】 |
Dry oil lubrication system, thin oil lubrication system and
circulating lubrication system provide enough lubricant to each
lubrication part through automatic control to ensure the safe
operation of the machine; | The system has two channels for batch eliminations. The operating
state of the two channels is controlled by a transfer solenoid
valve mounted on the outlet slot. When the machine starts working,
the scrap channel is opened. Once the required punching speed is
reached, the waste channel is automatically closed according to the
setting, and the qualified chip channel is opened. In the case of
shutdown or emergency stop, the qualified film channel is closed
immediately, and the waste film channel is opened at the same time. |
Hydraulic system:
【 Forced feeding system 】 | The feeder is easy to disassemble and assemble, easy to clean.
High-precision impeller force-feeding mechanism, with the agitator
to force the material into each die hole, so that the difference in
the weight of the sheet is smaller, the feeder feeder feeder groove
is equipped with two receiving scraper, used to recycle the
material on the surface of the middle punch tray into the feeder.
The problems of insufficient filling of free blanking, excessive
dust of working plate and cross contamination of ordinary sheet
press are solved. |
Core components:
[High Precision Bearings] | 【High-precision guide rails and press wheels】 |
Adopting high-precision bearings, smooth transmission, long life
and low noise. Adopting high-precision guide rails and press wheels;
wear-resistant, with good consistency and interchangeability. |
Core Components:
【 High precision punching plate combination 】 | The processing technology of punching die holes of other
manufacturers is normally cut by boring machine, because this
processing method leads to the poor finish of the middle plate
hole, and the later stage and the middle die can only be
interference fit, resulting in the difficulty of entering and
exiting the hole of the middle die. The company's middle die holes in the boring machine cutting, and
then each hole grinding, at the same time with the coordinate
detection equipment for hole detection, to ensure the finish and
accuracy of the hole. The processing cost is much higher. The punch
plate is the most core workpiece of the tablet press, and its
accuracy can fully represent the overall accuracy of the high-speed
tablet press. |
【 Free hand change 】 | Remove and assemble the mold by hand without borrowing any tools.
The design and development ensure that the medium die hole of the
plate of the high speed tablet press will not be deformed for a
long time. Other manufacturers because of borrowing tools to knock on the mold
to complete the assembly and disassembly, but borrowing tools to
knock on the mold is easy to extrude metal chips, and labor
intensity, low production efficiency, waste a lot of time, while
years of knocking on the mold, so that the hole becomes elliptical,
precision loss, up and down punch with the mold precision problems. |
The machine [Convex-concave center mold locking structure] | Comparable [Tapered center mold locking structure ] |
The contact surface of the top wire of the center punch plate is
convex-concave, and the convex-concave surface of the top wire and
the ring groove of the center die make a horizontal fit to tighten
(face-to-face contact), which ensures that the center die won't be
taken out of the tableting machine for a long period of time, which
is extremely high in safety and lowest in risk. | The contact surface of the top wire of the center die of other
manufacturers in the same industry adopts the conical surface
(point contact), and the top wire adopts the way of side top with
the center die, and this kind of side slanting top in the working
process of the tablet press because of the sticking punch or
astringent punch and so on, there is the center die in the position
of the tablets by the downward punching out of the holes of the
center die, and then the tablets will be out of the stopper bar,
the forcing of the feeder, and other devices all hit the broken,
crash the car and such serious accidents, which will cause a long
time to stop the production of the user, waiting for the spare part
to repair the serious losses. |
【 oil collecting ring 】 | The oil collecting ring of the company's tablet press is completely
redesigned and opened by itself. According to the working process
of the tablet press, the punch rod needs lubrication, and the oil
on the punch rod is collected through the oil collecting ring
during the lubrication process. The oil collecting ring designed by
our company can ensure the effective collection of lubricating oil
on the basis of ensuring that the lubricating oil is effectively
lubricated, which can avoid the contamination of lubricating oil to
the drug and the appearance of "black dots" pieces, which have
risks to the quality of the drug. Although this is a small detail,
it has certain uses for avoiding the risk of product quality,
improving the quality of the drug and reducing waste. |