Auto Small Scale Capsule Filling Machine Industrial Pharmaceutical Equipment
Brand Name:Canaan Kaixinlong
Model Number:NJP-1200
Minimum Order Quantity:1
Payment Terms:T/T, L/C
Place of Origin:Wenzhou China
Price:20200$
Contact Now
Add to Cart
Verified Supplier
Address:
Zone C No. 2, Wandong Intelligent Manufacturing Industrial Park, 999 Wentao Road, Ruian Economic Development Zone, Ruian City.Zhejiang.China
Supplier`s last login times:
within 1 hours
Shipping
lt's easy to get a shipping quote! Just click the button below and complete the short form.
Get Shipping Quote
Product Details
Company Profile
Product Details
Overview of the machine:
Industrial Pharmaceutical Technology Pellet Filling Machine High Speed Capsule Filling Machine Pharmaceutical Equipment
The NJP-1200 series capsule filling machine designed and produced
by our factory has been improved and innovated for many times, and
is the preferred equipment for hospitals and small and medium-sized
pharmaceutical factories, replacing the original semi-automatic
capsule filling equipment.
Technical parameters:
| Output | 1200Capsules/min |
| No.of segment bores3 | 3 |
| Suitable fof capsule | 00#-5# |
| Total power | 5.6Kw(Standard configuration) |
| Overall weight90 | 900Kgs |
| Overall diemensions | 760(+304)mm*780mm(+304)*1900mm |
| Noise | ≤75DB(A) |
| Pressure | 0.4 ~ 0.7Mpa |
| Air consumption | ≤6m³ |
| Vacuum | -0.03 ~ -0.06Mpa |
| Filling error | ±2.5%~±5% |
The machine may make technical improvements without prior notice, and the attached picture shows the options that may be offered.
Sort of empty capsule:
principle The seeding tube is equipped with multiple circular holes and
communicate with the capsule hopper, and the channel is equipped
with capsule tablets. The seeding sac tube slides up and down to drop the empty capsule
into the pore channel. When the seeding capsule tube goes up, the
capsule piece will jam the capsule. When the seeding tube falls
down, the capsule holder rotates and drives the capsule to release
the capsule, and the capsule falls out of the hole. |
Orientation of the empty capsule:
Broadcast description
The capsule head always acts in the middle of the capsule body, and
the capsule head pushes the capsule to make a U-turn movement,
which always pushes the capsule body to the edge of the capsule
comb, and then presses the capsule head down to turn the capsule
over and push it vertically into the module hole.
principle
1. The thrust point of the capsule head is on the capsule body;
2. The width of the chute is smaller than the outer diameter of the
capsule cap, which is larger than the outer diameter of the capsule
body. It only has a tightness effect on the capsule cap and does
not contact with the capsule body.
Orientation of the empty capsule
Body cap separation of the empty capsule:
principle
When the empty capsule enters the module hole, the vacuum suction
seat rises and is tightened with the lower module. Because the
diameter of the small hole of the upper and lower module steps is
less than the diameter of the capsule cap and the capsule body
respectively; when the vacuum is connected, the capsule body is
sucked into the lower module hole, the steps in the upper module
die hole block the capsule cap down, and the empty capsule cap is
separated.
Auto Small Scale Capsule Filling Machine Industrial Pharmaceutical Equipment
Inquiry Cart
0