Directly Sell HDPE Geomembrane Liner Hot Wedge Welding Machine with 27.12MHZ Frequency
Brand Name:tl
Place of Origin:Shandong, China
Condition:New
Voltage:220v
Frequency:27.12MHZ
Welding Area:Depend
Contact Now
Add to Cart
Verified Supplier
Address:
Tianping Steel Market, Taian, Shandong, China
Supplier`s last login times:
within 1 hours
Shipping
lt's easy to get a shipping quote! Just click the button below and complete the short form.
Get Shipping Quote
Product Details
Company Profile
Product Details
Product Overview
Geomembrane welding machine
Geomembrane welding machine is one of many welding equipment, the
main welding objects :HDPE, PE-C, PP,LDPE. Trough surface
geomembrane, impermeable membrane; Mechanical and electrical
integration design, small size, light weight, field operation has
good operability. Double weld lap welding, high temperature control
precision, high welding strength, good sealing effect, in the
middle of the weld leak detection path, automatic crawling can
achieve slope, vertical, upside down automatic welding.
PRODUCT SPECIFICATIONS
No | Item | Data | ||
1 | Input voltage | 220V | ||
2 | frequency | 50HZ | ||
3 | Heat sealing temperature | 0-450°C | ||
4 | Heat closing speed | 0-5m/min | ||
5 | Power | 1300W | ||
6 | Thermal bonding strength | >85% base material (shear tensile strength) | ||
7 | Machine weight | 5kg | ||
8 | Welding material thickness | 0.2mm-2mm |
PRODUCT CONFIGURATION
Semi-Automatic PET Bottle Blowing Machine Bottle Making Machine
Bottle Moulding Machine PET Bottle Making Machine is suitable for
producing PET plastic containers and bottles in all shapes.
Product picture
Operation instruction
Since the quality of welding in the machine is directly related to
the working speed and temperature control, to achieve high quality
welding, you need to hire professionals. 1. The user must select
the back thread and three sockets with a current of at least 10A,
and ensure that the connection is made from the outside (connection
line L in the corresponding welding machine, neutral line N, ground
protection line L), press the machine support to disconnect the
chuck and adjust the switch. 2. Temperature, turn on the power
switch, there must be a choice and speed, and welding pressing, due
to the temperature difference, material thickness, for each of the
two cases, different welding to choose the same material
temperature, in proportion to the rate (about centrifuge/minute),
the temperature will choose high to low (about 250°C-350°C) slowly
level, to better identify the welding effect. 3. Temperature
welding, beige transparent material, can be directly seen, with
welded joints and transparent leveling glass, the surface heat
speed is fast, welding is seriously damaged, where the overheating
increases or is slow, such as transparent welding does not turn
white, indicating low temperature or fast speed, opaque material to
see if there are welding traces. It can also be used for tensile
test after full cooling 4. The edges of the welding material are
attached to the front and woven in the lower left and upper right
corners. 5. After setting the temperature and speed between the
pistons, the welding material is introduced to make the hull
parallel to the edge of the mother village, and the pressure rod
support can be welded, and the operator usually needs to monitor
whether the welding marks deviate from the edge of the material and
timely small-scale correction. 6. When welding the material to the
end, press the handle at the right moment to separate the top and
bottom of the wheel. So it won't last very long 7. Due to thermal
inertia, if the temperature is too high or too low during welding,
the speed can be adjusted on a small scale to compensate for the
temperature deviation. 8. Weld with another material in the form of
"T" welding (FIG. 3), the weld is cut with a hot knife about 150 mm
long near the weld mark.
SIMILAR PRODUCTS
Directly Sell HDPE Geomembrane Liner Hot Wedge Welding Machine with 27.12MHZ Frequency
Inquiry Cart
0