IFM Flow sensor SA5000 SAD10XDBFRKG

Brand Name:IFM
Certification:3C
Model Number:SA5000
Minimum Order Quantity:1
Delivery Time:3 day
Payment Terms:T/T
Contact Now

Add to Cart

Verified Supplier
Location: Xiamen Guangdong China
Address: 903-3, building F02, phase III Software Park, Jimei district, Xiamen city,CHINA (361000)
Supplier`s last login times: within 1 hours
Product Details Company Profile
Product Details
Product characteristics
Number of inputs and outputs Number of digital outputs: 2; Number of analogue outputs: 1
Process connection threaded connection M18 x 1,5 internal thread
Application
Special featureGold-plated contacts
Mediawater; glycol solutions; air; oils
Note on medialow-viscosity oils with viscosity: ≤ 40 mm²/s (40 °C)
high-viscosity oils with viscosity: > 40 mm²/s (40 °C)
Medium temperature[°C]-20...90
Pressure rating[bar]100
Pressure rating[Mpa]10
MAWP (for applications
according to CRN)
[bar]100
ifm electronic gmbh • Friedrichstraße 1 • 45128 Essen — We reserve the right to make technical alterations without prior notice. — EN-GB — SA5000-01 — 26.04.2021 —
SA5000
Flow sensor
SAD10XDBFRKG/US-100
Electrical data
Operating voltage[V]18...30 DC
Current consumption[mA]< 100
Protection classIII
Reverse polarity protectionyes
Power-on delay time[s]10
Inputs / outputs
Number of inputs and outputsNumber of digital outputs: 2; Number of analogue outputs: 1
Outputs
Total number of outputs2
Output signalswitching signal; analogue signal; frequency signal; IO-Link; (configurable)
Electrical designPNP/NPN
Number of digital outputs2
Output functionnormally open / normally closed; (parameterisable)
Max. voltage drop switching
output DC
[V]2.5
Permanent current rating of
switching output DC
[mA]250
Number of analogue outputs1
Analogue current output[mA]4...20; (scalable)
Max. load[Ω]350
Short-circuit protectionyes
Type of short-circuit
protection
pulsed
Overload protectionyes
Frequency of the output [Hz]0...1000
Measuring/setting range
Probe length L[mm]45
Operating moderelative; absolutely liquid; absolutely gaseous;
(absolute: reference measurement recommended)
Note on factory settingOperating mode: relative
Liquids
Setting range
Greatest sensitivity
[m/s]
[m/s]
0.04...6
0.04...3
Gases
Setting range
Greatest sensitivity
[m/s]
[m/s]
0...200
2...100
Temperature monitoring
Measuring range
Resolution
[°C]
[°C]
-20...90
0.2
ifm electronic gmbh • Friedrichstraße 1 • 45128 Essen — We reserve the right to make technical alterations without prior notice. — EN-GB — SA5000-01 — 26.04.2021 —
SA5000
Flow sensor
SAD10XDBFRKG/US-100
Accuracy / deviations
Flow monitoring
Temperature drift[cm/s x 1/K]0,003 m/s x 1/K (< 20 °C; > 70 °C)
Temperature gradient [K/min]100
Accuracy± (7 % MW + 2 % MEW); (for relative mode in the range of maximum
sensitivity under the following conditions:; water: 20...70 °C; inlet
length: 1.5 m; DN25 (DIN 2448); mounting position according to
instructions; Accuracy can differ for other media and mounting positions.)
Repeatability0,05 m/s; (water; flow velocity: 0,05...3 m/s)
Temperature monitoring
Temperature drift ± 0,005 K/°C
Accuracy [K] ± 0,3 / ± 1; (water; flow velocity: 0,3...3 m/s / air; flow velocity: > 10 m/s)
Response times
Flow monitoring
Response time [s]0.5; (T09; water; glycol: 0,8 s; air: 7 s; oil: 1,8 s; each T09)
Temperature monitoring
Dynamic response T05 / T09 [s]1,5 (T09); (water; flow velocity: 0,3...3 m/s)
Software / programming
Parameter setting optionshysteresis / window; normally open / normally closed; switching logic; current/
frequency output; medium selection; Damping; Teach function; display can be
rotated and switched off; standard unit of measurement; process value colour
Interfaces
Communication interfaceIO-Link
Transmission typeCOM2 (38,4 kBaud)
IO-Link revision1.1
SDCI standardIEC 61131-9
ProfilesSmart Sensor: Process Data Variable; Device Identification, Device Diagnosis
SIO modeyes
Required master port typeA
Process data analogue2
Process data binary2
Min. process cycle time [ms]3
Supported DeviceIDsType of operationDeviceID
Factory setting / ModE = (REL)533
ModE = (LIQU)540
ModE = (GAS)547
Operating conditions
Ambient temperature [°C]-40...80
Storage temperature
Protection
[°C]-40...100
IP 65; IP 67
ifm electronic gmbh • Friedrichstraße 1 • 45128 Essen — We reserve the right to make technical alterations without prior notice. — EN-GB — SA5000-01 — 26.04.2021 —
SA5000
Flow sensor
SAD10XDBFRKG/US-100
Tests / approvals
EMCDIN EN 60947-5-9
Shock resistanceDIN EN 60068-2-2750 g (11 ms)
Vibration resistanceDIN EN 60068-2-620 g (10...2000 Hz)
MTTF [years]132
UL approvalUL Approval no.I003
Mechanical data
Weight [g]314
Materialsstainless steel (1.4404 / 316L); stainless steel (1.4310 / 301); PBT-GF20; PBT-GF30
Materials (wetted parts)
Process connection
stainless steel (1.4404 / 316L); Gasket: FKM
threaded connection M18 x 1,5 internal thread
Displays / operating elements
Display unit6 x LED, green (%, m/s, l/min, m³/h, °C, 10³)
Displayswitching status2 x LED, yellow
measured valuesalphanumeric display, red/green 4-digit
Remarks
RemarksMW = measured value
MEW = Final value of the measuring range
Pack quantity1 pcs.
China IFM Flow sensor SA5000 SAD10XDBFRKG supplier

IFM Flow sensor SA5000 SAD10XDBFRKG

Inquiry Cart 0