B&R 8V1016.50-2 Servo Motor Protector Drive Module 8V1016.502

Brand Name:B&R
Model Number:8V1016.50-2 ACOPOS
Minimum Order Quantity:1pc
Delivery Time:3-5days
Payment Terms:T/T, L/C
Place of Origin:Austria
Contact Now

Add to Cart

Verified Supplier
Location: Xiamen Guangdong China
Address: 903-3, building F02, phase III Software Park, Jimei district, Xiamen city,CHINA (361000)
Supplier`s last login times: within 1 hours
Product Details Company Profile
Product Details
General information
B&R ID code0x18D7
Slots for plug-in modules3
Certifications
CEYes
UKCAYes
Functional safetyYes
ULcULus E225616
Power conversion equipment
EACYes
KCYes
Mains connection
Permissible network configurationsTT, TN
Mains input voltage3x 110 VAC to 230 VAC ±10% or 1x 110 VAC to 230 VAC ±10%
Frequency50 / 60 Hz ±4%
Installed loadMax. 2.1 kVA
Inrush current5 A (at 230 VAC)
Switch-on interval>10 s
Integrated line filter per EN 61800-3, category C3Yes
Power dissipation at device nominal power without braking resistor110 W
DC bus connection
DC bus capacitance2040 µF
24 VDC power supply
Input voltage24 VDC +25% / -20%
Input capacitance5600 µF
Current consumptionMax. 1.47 A + Current for motor holding brake
Motor connection
Quantity1
Continuous current3.6 Aeff
Reduction of continuous current depending on ambient temperature
Mains input voltage: 110 VAC
Switching frequency 5 kHzNo reduction
Switching frequency 10 kHzNo reduction
Switching frequency 20 kHzNo reduction
Mains input voltage: 230 VAC
Switching frequency 5 kHzNo reduction
Switching frequency 10 kHzNo reduction
Switching frequency 20 kHzNo reduction
Reduction of continuous current depending on installation elevation
Starting at 500 m above sea level0.36 Aeff per 1000 m
Peak current12 Aeff
Nominal switching frequency10 kHz
Possible switching frequencies5 / 10 / 20 kHz
Insulation stress of the connected motor per IEC TS 60034-25:2004Limit value curve A
Max. motor line length15 m
Protective measures
Overload protectionYes
Short-circuit and ground fault protectionYes
Max. output frequency598 Hz
Terminal connection cross section
Flexible and fine-stranded wires
With wire end sleeves0.25 to 4 mm²
Approbation data
UL/C-UL-US30 to 10 AWG
CSA28 to 10 AWG
Motor holding brake connection
Response threshold for open-circuit monitoringApprox. 245 mA
Max. output current1.3 A
Max. number of switching cyclesUnlimited since implemented electronically
Braking resistor
Peak power output1.9 kW
Continuous power130 W
Limit switch and reference inputs
Quantity3
CircuitSink
Electrical isolation
Input - ACOPOSYes
Input - InputNo
Input voltage
Nominal24 VDC
Maximum30 VDC
Switching threshold
Low<5 V
High>15 V
Input current at nominal voltageApprox. 4 mA
Switching delayMax. 2.0 ms
Modulation compared to ground potentialMax. ±38 V
Enable inputs
Quantity1
CircuitSink
Electrical isolation
Input - ACOPOSYes
Input voltage
Nominal24 VDC
Maximum30 VDC
Input current at nominal voltageApprox. 30 mA
Switching threshold
Low<5 V
High>15 V
Switching delay
Enable 0 → 1, ready for PWMMax. 100 µs
Enable 1 → 0, PWM offMax. 2.0 ms
Modulation compared to ground potentialMax. ±38 V
OSSD signal connectionsNot permitted
Trigger inputs
Quantity2
CircuitSink
Electrical isolation
Input - ACOPOSYes
Input - InputNo
Input voltage
Nominal24 VDC
Maximum30 VDC
Switching threshold
Low<5 V
High>15 V
Input current at nominal voltageApprox. 10 mA
Switching delay
Rising edge52 µs ±0.5 µs (digitally filtered)
Falling edge53 µs ±0.5 µs (digitally filtered)
Modulation compared to ground potentialMax. ±38 V
Electrical properties
Energy efficiency (IE classification)
Power loss relative to continuous apparent powerIE2 (10,25) 5.3%
IE2 (50,25) 5.9%
IE2 (10,50) 5.4%
IE2 (50,50) 6.7%
IE2 (90,50) 9%
IE2 (10,100) 6.3%
IE2 (50,100) 9.7%
IE2 (90,100) 16.5%
Nominal losses in standby mode12.5 W
Operating conditions
Permissible mounting orientations
Hanging verticallyYes
Horizontal, face upYes
Standing horizontallyNo
Installation elevation above sea level
Nominal0 to 500 m
Maximum2000 m
Pollution degree per EN 61800-5-12 (non-conductive pollution)
Overvoltage category per EN 61800-5-1II
Degree of protection per EN 60529IP20
Ambient conditions
Temperature
Operation
Nominal5 to 40°C
Maximum55°C
Storage-25 to 55°C
Transport-25 to 70°C
Relative humidity
Operation5 to 85%
Storage5 to 95%
TransportMax. 95% at 40°C
Mechanical properties
Dimensions
Width58.5 mm
Height257 mm
Depth220 mm
Weight

2.5 kg


MATERIAL NUMBER:
8V1016.50-2
DESCRIPTION:
  • Designed for operation on a single-phase or three-phase power mains
  • Modular mechanical design using plug-in modules
  • Integrated line filter
  • Integrated braking resistor
  • Integrated electronic restart inhibit
ACOPOS servo drive, 3x 110-230 V / 1x 110-230 V, 3.6 A, 0.7 kW, integrated line filter, braking resistor and electronic safe restart interlock
China B&R 8V1016.50-2 Servo Motor Protector Drive Module 8V1016.502 supplier

B&R 8V1016.50-2 Servo Motor Protector Drive Module 8V1016.502

Inquiry Cart 0