Intelligent light filling system
The growth of all things depends on the sun, and the quality of
light conditions directly affects the yield and quality of crops.
Because of the influence of covering material, dust and shading
structure, the light condition in greenhouse is much worse than
that in open field. Artificial light supplement has become an
inevitable choice for the management of many controllable
greenhouses.
- The intelligent light supplement system can effectively help
improve the yield and quality of crops, improve the growth rate of
crops, and effectively save time and cost
- the solar energy can be effectively utilized, and a proper amount
of illumination can be provided at a proper time according to the
growth needs of crops, so that the energy is saved, and the
pollution to the environment is reduced.
- The intelligent light supplement system can truly simulate the
natural environment, accurately control the temperature, humidity,
light and other parameters, so that crops can grow in the best
state, improve the quality and yield of crops, and improve disease
resistance.
Hydroponic beds are a soilless culture technique that uses a nutrient solution to
directly nourish the roots of plants without the need for soil as a
medium. This technology has many advantages and is suitable for
cultivating healthy plant seedlings in greenhouse environment
- Deep Flow Planting System (DWC): This is a simple and widely used method of hydroponics. In the DWC
system, plants are placed in net pots that are suspended above an
oxygen-rich nutrient solution. The roots of the plant are immersed
in the solution, thereby absorbing the required nutrients.
- Tidal beds: Tidal beds are another soilless culture technique, also
known as "ebb and flow systems.". In this system, a nutrient solution circulates through the seedbed,
mimicking the ebb and flow of the tide to irrigate the plants. The
advantage of this system is that it can better control the supply
of water and nutrients and reduce the occurrence of diseases.
- Shallow sap flow planting systems: Unlike traditional deep sap flow, the nutrient solution in shallow
sap flow planting systems covers only a portion of the plant's
roots. This method is suitable for plants that do not require so
much water.
- Nutrient recycling: In a hydroponic system, the nutrient solution can be recycled,
which means that the plants continuously draw the nutrients they
need from the same nutrient solution throughout the growing cycle.
- High space utilization: Hydroponic beds can grow a large number of plants in a limited
space, which is a significant advantage for greenhouse growing.
- Environmental control: The use of hydroponic beds in greenhouses allows more precise
control of the environmental conditions for plant growth, such as
temperature, humidity, light and carbon dioxide concentration.
Hhydroponic seedbeds provide an efficient, water-saving and
easy-to-manage planting method for greenhouse planting. By choosing
the right hydroponic system, it is possible to provide the best
growing conditions for the plant, resulting in a high quality
yield.
/1,Large lighting area and uniform illumination |
/2,Long service time and high strength |
/3,Strong corrosion resistance and flame retardancy |
/4,More than 90% of the light transmission, and does not decay with
time |
Seedling Greenhouse
The Seedling Greenhouse from Qingzhou Juxiang Agricultural Equipment Co., Ltd. is an essential component of modern agriculture, providing an
efficient, stable, and sustainable supply of seedlings for
agricultural production.
- Illumination Control Facilities: Different varieties of seedlings and growth stages require
specific light conditions. Our greenhouse is equipped with
illumination control facilities such as plant lights and
supplementary lights to regulate and provide the necessary light
for optimal growth.
Humidity Control Facilities
The greenhouse's humidity is crucial for seedling growth. Our
humidity control facilities from Qingzhou Juxiang Agricultural
Equipment Co., Ltd. ensure optimal conditions for healthy plants.
Humidification Equipment- Atomizer, water sprayer, wet curtain
- Prevent direct spraying on seedlings
| Dehumidification Equipment- Ventilation equipment, dehumidifier
- Reduce temperature and humidity
- Prevent mold growth
|
Trust Qingzhou Juxiang Agricultural Equipment Co., Ltd. for
efficient humidity control solutions in your greenhouse.
Water and Fertilizer Control Facilities
The water and fertilizer control facilities are essential for
promoting the healthy growth of seedlings in greenhouses.
Features:
- Includes irrigation equipment and fertilization equipment
- Various irrigation methods such as drip irrigation and sprinkler
irrigation
- Fertilizing equipment options like a fertilizer solution tank and
automatic fertilizer distributor
Benefits:
- Promotes healthy growth of seedlings
- Controls the amount and timing of water and fertilizer for optimal
growth
- Rational fertilization based on growth stages and fertilizer
demands
Ensure your greenhouse seedlings thrive with the water and
fertilizer control facilities from Qingzhou Juxiang Agricultural
Equipment Co., Ltd.
5.CO2 control facilities CO2 is a necessary condition for plant photosynthesis, which can
promote plant growth and increase yield. In the greenhouse, the
concentration of CO2 is usually low and needs to be supplemented.
CO2 control facilities include CO2 generator, CO2 controller, etc.
The CO2 generator can generate CO2 by burning fuel, chemical
reaction and the like, and the CO2 controller can automatically
control the concentration of CO2 to keep the concentration of CO2
within a proper range.
| 6.Dust removal and purification facilities It is easy to produce dust, bacteria and other pollutants in the
greenhouse, which will affect the growth and quality of seedlings.
Dust removal and purification facilities can purify harmful
substances such as dust and bacteria in the air, improve the air
quality in the greenhouse, and ensure the healthy growth of
seedlings. Dust removal and purification facilities include
filters, ultraviolet germicidal lamps, etc. Filters can filter dust
and other impurities in the air, and ultraviolet germicidal lamps
can kill bacteria and viruses in the air.
|
Enhance Seedling Growth with Environmental Control Facilities
At Qingzhou Juxiang Agricultural Equipment Co., Ltd., we understand
the significance of environmental control facilities in seedling
greenhouses. Our range of advanced facilities ensures optimal
growth, development, and quality of seedlings. By regulating the
use of these facilities according to specific seedling needs and
growth stages, you can maintain ideal environmental conditions
within the greenhouse. This, in turn, promotes the healthy growth
of your seedlings, leading to robust and high-quality plants.
Our glass greenhouse ventilation system is designed to efficiently
remove waste heat and moisture, adjust air composition, eliminate
harmful gases, and create optimal environmental conditions for
plant growth. With our system, you can easily regulate temperature,
humidity, and air quality in your greenhouse, ensuring your plants
thrive.
- Natural ventilation
glass greenhouse relies on natural ventilation to regulate the
indoor environment most of the time. The structural form of large
productive glass greenhouse is generally double-slope multi-span
greenhouse, and the ventilation form is to set ventilation windows
on the side wall and roof ridge. Its total ventilation area is not
less than 15% of the greenhouse area, preferably more than 30%.
When the roof wind window is opened, the window sash should be
inclined upward beyond the horizontal plane. When it is fully
opened, it forms an angle of 100 with the horizontal plane, which
can achieve good ventilation effect.
| | 2.Forced ventilation
glass greenhouses rely on natural ventilation to regulate the
environment most of the time, when the temperature is high in
summer, especially when the outdoor temperature is over 33 ºC, it
is difficult to meet the cooling requirements of greenhouses by
natural ventilation alone, so forced ventilation and other measures
are commonly used in production. Forced ventilation is to use fans
to convert electric energy or other mechanical energy into wind
energy, forcing air flow to ventilate the greenhouse and achieve
cooling effect.
|
1.Hot water heating The hot water heating system is composed of three
basic parts: hot water boiler, heat supply pipe and heat
dissipation equipment. Its working process is to heat water with the boiler and then
pressurize it with the water pump. The hot water is supplied to the
radiator in the greenhouse through the heat supply pipe. The
radiator is used to heat and raise the temperature of the
greenhouse. The cooled hot water is returned to the boiler for
reheating and repeated circulation. The hot water heating system is
stable and reliable, which is the most commonly used heating mode
in glass greenhouse. | |
2.hot air heat system Consists of a heat source, an air heat exchange, a fan and an air
supply pipeline. Its working process is as follows: the air
exchanger is heated by the heat provided by the heat source, and
the fan is used to force part of the air in the greenhouse to flow
through the air heat exchanger, so that the greenhouse is heated by
continuous circulation. The heat source of the hot air heating
system can be oil, gas, coal-fired devices or electric heaters, and
can also be hot water or steam. The installation forms of hot air
heating equipment are different for different heat sources. |
3.Electric Heating The more common way of electric heating is to bury the ground
heating wire underground |
1. Shading and cooling methods include indoor shading and outdoor
shading. The indoor shading system is a supporting system made of
metal wires or plastic mesh wires connected to the greenhouse
framework, and the shading net is installed on the film supporting
line. Generally, electric control or manual control is adopted. The
outdoor shading system is characterized in that a shading framework
is additionally arranged outside the greenhouse framework, a
shading net is arranged on the framework, and the shading net can
be driven by a curtain pulling mechanism or a film rolling
mechanism to be freely opened and closed. The outdoor installation
of the sunshade net has good cooling effect, can directly block the
solar energy outside the greenhouse, and various types of sunshade
nets can be used.
2. Evaporative cooling uses the unsaturation of air and the latent
heat of evaporation of water to cool down. When the moisture in the
air is not saturated, the moisture will evaporate into water vapor
and enter the air. When the water evaporates, it absorbs the heat
in the air, reduces the temperature of the air and increases the
humidity of the air. In the process of evaporative cooling, it is
necessary to ensure the air flow inside and outside the greenhouse,
to discharge the high temperature and humidity gases from the
greenhouse, and to supplement fresh air, so the forced ventilation
method must be adopted. Evaporative cooling methods include wet
curtain-fan cooling and spray cooling.
3. The roof spray cooling system is to spray water evenly on the
roof of the glass greenhouse to reduce the temperature of the
greenhouse. When water flows on the glass greenhouse roof, the
water exchanges heat with the glass of the greenhouse roof and
takes away the heat in the greenhouse. In addition, when the
thickness of the water film is greater than 0.2 mm, all the energy
of solar radiation is absorbed and taken away by the water film,
which is equivalent to shading.Qingzhou Ju xiang Greenhouse Horticulture Co., LTD is a professional company which sets greenhouse and supporting
facility design, manufacture and research&development in one.
The major products include flower market greenhouses, planting
greenhouses, aquaculture greenhouses, livestock breeding
greenhouses, ecological restaurant greenhouses, glasshouses,
spherical greenhouses, sunlight-plate greenhouses, photovoltaic
solar energy greenhouses, thin film greenhouses and corresponding
accessories.
Our advantages
1.We have our own factory with unique national patent technology.
2.We have 6 state-level horticulturists, 20 flower technicians and
22 vegetable technicians.
3.To provide all agricultural technical guidance, technical
personnel export.
4.Provide thoughtful after-sales service, 15 years warranty, free
on-site maintenance.
Our corporation tenet
Survival by quality, development by reputation, pioneering and
realistic innovation is the company's service aim to focus on
quality and safety, wholeheartedly for the user service, with a new
good corporate image to become the direction of enterprise
development.
Q: Are you trading company or manufacturer ?
A:We are manufacturer, with 30 years of experience. We have our own
exporting department. In the past 30 years, more than 1000 projcets
were performed and constructed by our company.
Q:Is your price competitive with other companies?
A: Our business objectives are to give the best price with same
quality and best quality with the same price. We will do
everything we can to reduce your cost.
Q:.How long is the delivery time?
A:15 working days.
Q:Is there any instruction or manual guide installation?
A:Yes, English manual with drawing and video shipped together with
goods for guiding your installation easily.
B:Engineer overseas guiding installation is available.
C:Your worker or engineer is welcomed to our factory for learning
your greenhouse installation.