Enerkey 3.7V Li-ion Lifepo4 7S 24V 200A BMS Common Port with Balance Temperature Measure for Electric Forklift
Brand Name:Enerkey
Certification:ISO9001/CE/ROHS
Model Number:EK-BM3R8S200A
Minimum Order Quantity:30pieces
Delivery Time:3-5days
Payment Terms:L/C,D/A,D/P,T/T,Western Union,MoneyGram
Contact Now
Add to Cart
Verified Supplier
Location:
Shenzhen China
Address:
Area A, 9th Floor, Building G, Guancheng Low Carbon Industrial Park, Shangcun Community, Gongming Street, Guangming District, Shenzhen, China, 518106
Supplier`s last login times:
within 39 hours
Product Details
Company Profile
Product Details
Enerkey 3.7V Li-ion Lifepo4 7S 24V 200A BMS Common Port with Balance Temperature Measure for Electric Forklift
Product Description
Product name
IP65 waterproof BMS protection board | 3S-8S 200A power battery
dedicated | anti-vibration / corrosion resistant
Core function
Harsh environment adaptation: aluminum alloy shell + potting
process, IP65 waterproof and dustproof, suitable for outdoor energy
storage, mining equipment and other scenarios.
Strong anti-interference design: ESD protection up to 8kV, TVS
absorbs surge current to avoid electromagnetic interference causing
false operation.
Wide temperature range operation: -20℃~75℃ stable operation,
built-in dual NTC sensor linkage control charging and discharging.
Technical parameters
Current range: 10A-200A (supports constant current/pulse discharge
mode).
Balance mode: passive balance (80mA).
Typical application
AGV transporter battery pack (anti-seismic design, adapt to
frequent start and stop).
Solar street light energy storage (low power standby <3μA,
extended battery life).
Electric motorcycle power system (supports 13S-20S extended
models).
Hardware connection and sensor layout
Multiple NTC installation and positioning: Install multiple NTC
temperature sensors (negative temperature coefficient thermistors)
at key locations of the battery pack, such as the cell surface,
shell heat dissipation area, environmental contact points, etc., to
achieve full coverage of temperature monitoring.
Interface matching: Confirm that the protection board supports multiple temperature detection interfaces (such as TH1 and TH2 marked ports), each NTC needs to be independently connected to the corresponding terminal, and ensure that the resistance range is compatible with the protection board (usually 10kΩ @25℃).
Technical Parameters
| Item type | Parameters | |||||||||
| 1 | Parameter Overview | Product Model | EK-BM3R8S200A | |||||||
| Product Size(mm) | L125*W68*T18.2 | |||||||||
| Product Weight(kg) | 0.3 | |||||||||
| Product Material | FR-4 / Lead-free spray tin | |||||||||
| Applicable battery type | Lifepo4 | Li-ion | Lto | SIB | ||||||
| Applicable battery string | 3S-8S | 3S-8S | 3S-8S | 3S-8S | ||||||
| Rated discharge current | 200A | 200A | 200A | 200A | ||||||
| Peak starting current | 600A | 600A | 600A | 600A | ||||||
| Item type | Trigger (time) | Trigger (time) | Trigger (time) | Trigger (time) | Trigger (time) | Trigger (time) | Trigger (time) | Trigger (time) | ||
| 2 | Charging protection | Overvoltage protection voltage value | 3.65V/1S | 3.50V/1S | 4.25V/1S | 4.05V/1S | 2.85V/1S | 2.75V/1S | 3.95V/1S | 3.80V/1S |
| Balanced phase difference voltage value | Trigger voltage difference 30mV / trigger time 0.5S / balance time 10S cycle | |||||||||
| Balanced voltage value | 3.45V | 3.70V | 2.50V | 3.10V | ||||||
| Overcurrent value | 200A/2S, disconnect charger to recover | |||||||||
| Low temperature value | Charge over-temperature protection 60℃/2S / Release 55℃/2S | |||||||||
| Overtemperature value | Charging low temperature protection -5℃/2S / Release 0℃/2S | |||||||||
| 3 | Discharge protection | Undervoltage protection voltage value | 2.30V/1S | 2.70V/1S | 2.75V/1S | 3.0V/1S | 1.70V/1S | 1.80V/1S | 1.50V/1S | 2.00V/1S |
| ①Overcurrent protection value | 250A/2S, disconnect load or activate charging | |||||||||
| ②Overcurrent protection value | 500A/0.5S, disconnect load or activate charging | |||||||||
| Short circuit protection value | 1000A/128uS, disconnect load or charge activated | |||||||||
| Low temperature value | Discharge over-temperature protection 65℃/2S, release 60℃/2S | |||||||||
| Overtemperature value | Discharge low temperature protection -20℃/2S, release -10℃/2S | |||||||||
| 4 | Others | Standby current consumption | 25uA | |||||||
| Motherboard lock voltage | / | |||||||||
Size $ Packing List
Package included:
1 * BMS
1 * NTC Terminal Cable
1 * Switch Cable
1 * Terminal Cable
6 * Terminal Lugs
6 * M5 Screws
Wire Diagram
Wiring precautions:
1. Installing the protective board requires a certain amount of
technical electronic knowledge.
2. When wiring, first connect the B- wire at the soldering pad
position to the total negative terminal of the battery (the B- wire
should be soldered to a short and thick wire) and solder the wired
terminal to the battery pack first, and then insert the protective
plate.
3. The connection between the battery terminal B- and the
protection board terminal B- should be short and thick, otherwise
it will cause the protection board to charge and discharge in
advance and malfunction.
4. You need to use thick wires when wiring P+/P-. Wires that are too thin and too long will burn the board!
FAQ
Q1. Why did we choose you?
* We can provide you with efficient after-sales service, with more than 10 years of strong technical support.
* Products have passed FCC, CE, ROHS and other international standards certification.
* We can provide you with factory price, Welcome you to visit our factory and production process.
Q2. What is your product range (type)?
*We mainly do battery management systems in the fields of power batteries, energy storage batteries and consumer batteries.
*Mainly used for LFP, Li-ino and LTO batteries.
Q3: How do I know which kind of material & type my battery is ?
*Please look the battery body, If the normal voltage of your battery shows 3.2V, The battery is LiFePo4.
*If the normal voltage of your battery shows 3.6V or 3.7V, the battery is Li-ion or Lto battery.
Q4. Do you have minimum order requirements?
Can it be customized? What is the lead time for samples and batches?
*Our minimum order quantity is 1 piece, ODM customization is available.
* 1~3 days delivery of existing samples, 3~10 days delivery of customized samples.
Q5: What if i can't use it?
*Regular products have instructional videos, We can also support online video call guidance from engineers.
Q6. What are your terms of payment?
*We accept wire transfer and cash payment, all negotiable. Payment method :visa, mastercard, T/T, PayPal, APPLE_PAY, GOOGLE_PAY, GC_REAL_TIME_BANK_TRANSFER, RMB
Q7. How do you guarantee the quality?
* All our products are subjected to professional laboratory 100% testing, as well as repeated aging tests.
* Obtained FCC, CE, ROHS and other international standard certification.
* Provide 3 years after-sales warranty service. Free spare units for replace in 3 years.
Q8. How to choose a BMS suitable for our battery?
*Depending on the voltage and current that matches your battery, you can consult our customer service and we will provide it for you equipped with the most suitable battery management system.
Q9. How can i contact you?
*We have 7x24 hours online service, Please leave us a message online.
*You can also contact us by Email, WhatsApp, WeChat, etc(see below). We are so glad to work with you.
Noted: We are source manufacturer, We have own brand for "EnerKey",We can customized product as your requirement(Voltage, Wire,Etc) .
We can provide you competitive price in the market if you have bulk
order, Please don't hesitate to contact us.
Mobile & WhatsApp & Wechat: +86 15387469240; Email: kiwi@enerkey.cn
Enerkey 3.7V Li-ion Lifepo4 7S 24V 200A BMS Common Port with Balance Temperature Measure for Electric Forklift
Inquiry Cart
0