Enerkey 120A Continuous Discharge 4S BMS Lithium Battery Protection Board for Solar Street Lights

Brand Name:Enerkey
Certification:ISO9001/CE/ROHS
Model Number:EK-BM3R8S120A
Minimum Order Quantity:20pieces
Delivery Time:3-5days
Payment Terms:L/C, D/A, D/P, T/T, Western Union, MoneyGram
Contact Now

Add to Cart

Verified Supplier
Location: Shenzhen China
Address: Area A, 9th Floor, Building G, Guancheng Low Carbon Industrial Park, Shangcun Community, Gongming Street, Guangming District, Shenzhen, China, 518106
Supplier`s last login times: within 39 hours
Product Details Company Profile
Product Details

Enerkey 120A Continuous Discharge 4S BMS Lithium Battery Protection Board for Solar Street Lights

Product Description

Core parameters
1. Battery configuration
Supports 3S-8S lithium battery pack (ternary lithium/lithium iron phosphate/lithium titanate compatible)
2. Current performance
Continuous discharge current: 120A (stable operation)
Peak current: 300A (short-time pulse working condition support)
3. Voltage range
Adapts to 12V-33.6V system (full coverage of 3S ternary lithium to 8S iron lithium)
4. Temperature monitoring
Built-in NTC sensor, real-time monitoring of battery pack temperature (accuracy ±1℃)


Functional characteristics
1. Balance management
Passive balance technology, balance current 80mA-150mA (supports battery cell voltage difference repair)
2. Multiple protection mechanisms
Overcharge/over-discharge protection, overcurrent protection, short circuit protection, temperature protection (threshold programmable)
3. Heat dissipation design
Aluminum alloy shell + internal thermal conductive silicone, supports -20℃~85℃ wide temperature environment operation
4. Extension interface
Support Type-C communication expansion (optional Bluetooth/RS485 module remote monitoring)


Structural design
1. Shell material
All-aluminum alloy die-cast shell, surface anodized (anti-corrosion, anti-wear)

2. Heat dissipation optimization
Internally integrated heat sink, with air cooling/natural convection dual heat dissipation solution (support long-term full-load operation)

3. Lightweight design
Size 95×68×15mm, weight ≤2000g (compact package, suitable for multi-scenario installation)


Application scenarios
• On-board energy storage system: support RV/electric vehicle lithium battery pack management
• Industrial equipment: AGV robot, drone battery module matching
• Outdoor power supply: portable energy storage equipment, solar energy storage system


Certification and warranty
• Comply with RoHS/CE certification standards, provide 12-month warranty (support customized test reports)


Price and availability
• Standard version: 3S-8S general type, bulk purchase unit price starts at 150 yuan (≥500 pieces)
• Customized version: supports peak current upgrade to 300A, cell parameter customization required
Note: Some functions (such as RS458, RS232, CAN communication) need to be clearly specified during purchase.



Technical Parameters

 Item typeParameters
1Parameter OverviewProduct ModelEK-BM3R8S120A
Product Size(mm)L95*W68*T15
Product Weight(kg)0.25
Product MaterialFR-4 / Lead-free spray tin
Applicable battery typeLifepo4Li-ionLtoSIB
Applicable battery string3S-8S3S-8S3S-8S3S-8S
Rated discharge current120A120A120A120A
Peak starting current300A300A300A300A
 Item typeTrigger
(time)
Trigger
(time)
Trigger
(time)
Trigger
(time)
Trigger
(time)
Trigger
(time)
Trigger
(time)
Trigger
(time)
2Charging protectionOvervoltage protection voltage value3.65V/1S3.50V/1S4.25V/1S4.05V/1S2.85V/1S2.75V/1S3.95V/1S3.80V/1S
Balanced phase difference voltage valueTrigger voltage difference 30mV / trigger time 0.5S / balance time 10S cycle
Balanced voltage value3.45V3.70V2.50V3.10V
Overcurrent value120A/2S, disconnect charger to recover
Low temperature valueCharge over-temperature protection 60℃/2S / Release 55℃/2S
Overtemperature valueCharging low temperature protection -5℃/2S / Release 0℃/2S
3Discharge protectionUndervoltage protection voltage value2.30V/1S2.70V/1S2.75V/1S3.0V/1S1.70V/1S1.80V/1S1.50V/1S2.00V/1S
①Overcurrent protection value150A/2S, disconnect load or activate charging
②Overcurrent protection value250A/0.5S, disconnect load or activate charging
Short circuit protection value500A/128uS, disconnect load or charge activated
Low temperature valueDischarge over-temperature protection 65℃/2S, release 60℃/2S
Overtemperature valueDischarge low temperature protection -20℃/2S, release -10℃/2S
4OthersStandby current consumption25uA
Motherboard lock voltage/

Size $ Packing List

Package included:
1 * BMS with heatsink
1 * NTC Terminal Cable
1 * Switch Cable
1 * Terminal Cable
6 * Terminal Lugs
6 * M5 Screws


Wire Diagram

Wiring precautions:
1. Installing the protective board requires a certain amount of technical electronic knowledge.
2. When wiring, first connect the B- wire at the soldering pad position to the total negative terminal of the battery (the B- wire should be soldered to a short and thick wire) and solder the wired terminal to the battery pack first, and then insert the protective plate.
3. The connection between the battery terminal B- and the protection board terminal B- should be short and thick, otherwise it will cause the protection board to charge and discharge in advance and malfunction.

4. You need to use thick wires when wiring P+/P-. Wires that are too thin and too long will burn the board!


FAQ

Q1. Why did we choose you?

* We can provide you with efficient after-sales service, with more than 10 years of strong technical support.

* Products have passed FCC, CE, ROHS and other international standards certification.

* We can provide you with factory price, Welcome you to visit our factory and production process.


Q2. What is your product range (type)?

*We mainly do battery management systems in the fields of power batteries, energy storage batteries and consumer batteries.

*Mainly used for LFP, Li-ino and LTO batteries.


Q3: How do I know which kind of material & type my battery is ?

*Please look the battery body, If the normal voltage of your battery shows 3.2V, The battery is LiFePo4.

*If the normal voltage of your battery shows 3.6V or 3.7V, the battery is Li-ion or Lto battery.


Q4. Do you have minimum order requirements?

Can it be customized? What is the lead time for samples and batches?

*Our minimum order quantity is 1 piece, ODM customization is available.

* 1~3 days delivery of existing samples, 3~10 days delivery of customized samples.


Q5: What if i can't use it?

*Regular products have instructional videos, We can also support online video call guidance from engineers.


Q6. What are your terms of payment?

*We accept wire transfer and cash payment, all negotiable. Payment method :visa, mastercard, T/T, PayPal, APPLE_PAY, GOOGLE_PAY, GC_REAL_TIME_BANK_TRANSFER, RMB


Q7. How do you guarantee the quality?

* All our products are subjected to professional laboratory 100% testing, as well as repeated aging tests.

* Obtained FCC, CE, ROHS and other international standard certification.

* Provide 3 years after-sales warranty service. Free spare units for replace in 3 years.


Q8. How to choose a BMS suitable for our battery?

*Depending on the voltage and current that matches your battery, you can consult our customer service and we will provide it for you equipped with the most suitable battery management system.


Q9. How can i contact you?

*We have 7x24 hours online service, Please leave us a message online.

*You can also contact us by Email, WhatsApp, WeChat, etc(see below). We are so glad to work with you.


Noted: We are source manufacturer, We have own brand for "EnerKey",We can customized product as your requirement(Voltage, Wire,Etc) .
We can provide you competitive price in the market if you have bulk order, Please don't hesitate to contact us.
Mobile & WhatsApp & Wechat: +86 15387469240; Email: kiwi@enerkey.cn
China Enerkey 120A Continuous Discharge 4S BMS Lithium Battery Protection Board for Solar Street Lights supplier

Enerkey 120A Continuous Discharge 4S BMS Lithium Battery Protection Board for Solar Street Lights

Inquiry Cart 0