1.Connect Battery B- with BMS B- firstly! 2.Connect Battery 1 with
the BMS as the picture shows. (Please weld the wires in order
and avoid pseudo solder joints.) 3.Connect Charger C-/Load P- with
BMS C-/P-?(Use larger size wires) 4.Connect Positive Pole:
Charger C+/Load P+ with Battery Pack B+ (Use larger size wires) .
Pay attention to make insulation.
18650 NMC Li Ion Cells Lifepo4 Battery BMS Protection Board 1S 6A For Solar LED Lights
Brand Name:ENERKEY
Certification:ISO9001/ROHS/CE
Model Number:JW-B1S6A-346
Minimum Order Quantity:2 pieces
Place of Origin:Guangdong, China
Packaging Details:Carton
Contact Now
Add to Cart
Verified Supplier
Location:
Shenzhen China
Address:
Area A, 9th Floor, Building G, Guancheng Low Carbon Industrial Park, Shangcun Community, Gongming Street, Guangming District, Shenzhen, China, 518106
Supplier`s last login times:
within 39 hours
Product Details
Company Profile
Product Details
Enerkey 1S 6A BMS for 18650 NMC Li-ion Cells Purple Solder Mask PCM and Nickel Sheets
What Is LiFePO4 Battery BMS?
A BMS is an integral part of any lithium-ion battery system — it’s
responsible for keeping the cells within the battery pack healthy
and performing optimally.
Every battery has a specified range of voltage, current, and temperature in which it can safely operate. If one or more of these parameters varies considerably from their specified range, your battery pack can get permanently damaged (due to degradation of its components) and even pose safety risks.
Most batteries come with a built-in BMS to prevent this from happening.
Product Description
Electric Parameter | ||||||||||||
PCM Specifications For 3.7V(1S)Li-ion Battery Packs | ||||||||||||
Model:JW-B1S6A-346 | ||||||||||||
NO. | Project | Min. | Typ. | Max. | Unit | |||||||
1 | voltage | Charging voltage | 4.2 | V | ||||||||
Balance voltage for single cell | / | / | / | V | ||||||||
2 | Current | Balance current for single cell | / | mA | ||||||||
Current consumption | 20 | uA | ||||||||||
Maximal continuous charging current | 6 | A | ||||||||||
Maximal continuous discharging current | 6 | A | ||||||||||
3 | Over charge protection | Overcharge detection voltage for single cell | 4.225 | 4.25 | 4.275 | A | ||||||
Overcharge detection delay time | 0.5 | 2 | S | |||||||||
Overcharge release voltage for single cell | 4.00 | 4.05 | 4.100 | V | ||||||||
4 | Over discharge protection | Overdischarge detection voltage for single cell | 2.738 | 2.80 | 2.862 | V | ||||||
Overdischarge detection delay time | 10 | 200 | mS | |||||||||
Overdischarge release voltage for single cell | 2.938 | 3.000 | 3.062 | V | ||||||||
5 | Overcurrent protection | Over current detection voltage | 0.13 | 0.15 | 0.17 | V | ||||||
Over current detection current | 3 | 4 | 5 | A | ||||||||
Detection delay time | 5 | 20 | mS | |||||||||
Release condition | Cut load,Automatic recovery | |||||||||||
6 | Short protection | Detection condition | Exterior short circuit | |||||||||
Detection delay time | 200 | 500 | μS | |||||||||
Release condition | Cut load,Automatic recovery | |||||||||||
7 | Resistance | Protection circuitry (MOSFET) | 60 | mΩ | ||||||||
8 | Temperature | Operating Temperature Range | -40 | 85 | ℃ | |||||||
Storage Temperature Range | -40 | 125 | ℃ | |||||||||
Product Use Tutorial
matters need attention
FAQ
18650 NMC Li Ion Cells Lifepo4 Battery BMS Protection Board 1S 6A For Solar LED Lights
Inquiry Cart
0