China Directly Supplier/Manufacturer Flap Disk For Metal Welding Grinding

An abrasive flap disk, also known as a sanding flap disk, is a type of abrasive tool widely used in grinding, polishing, and surface finishing operations. It consists of multiple overlapping abrasive flaps that are assembled onto a central backing plate.

The Function and Characteristics of Flap Disc

Good Heat Dissipation: During the grinding process, heat is generated. Flap discs are designed to dissipate heat effectively. The open structure of the flaps allows air to circulate, which helps to cool down the grinding area. This not only protects the workpiece from overheating and potential damage but also extends the life of the abrasive flaps.
Controllable Aggressiveness: Different flap discs are available with varying levels of abrasiveness. This allows users to select the appropriate disc according to the specific requirements of the task. For example, a more aggressive flap disc can be used for heavy material removal, while a finer one is suitable for achieving a smooth and polished finish.
In conclusion, flap discs play an important role in many industrial and DIY applications due to their unique functions and characteristics. They offer an efficient and reliable solution for surface preparation and finishing tasks.

Material if flap disk

Made of plastic or fibre-mesh cover adhesive and emery cloth sheet

Structure of flap disk

1. Abrasive Flaps
   These are the key components of the flap disk. They are usually made of abrasive materials such as aluminum oxide, zirconia alumina, or silicon carbide. The flaps are cut into specific shapes and sizes. Each flap has an abrasive surface that contacts the workpiece during operation. The abrasive grains on the flaps are bonded using resin or other suitable bonding agents.
2. Backing Plate
   The backing plate provides support for the abrasive flaps. It is usually made of a durable material like plastic or metal. The center of the backing plate has a hole for mounting the disk onto a grinding machine's spindle. The design of the backing plate ensures that the flaps are held firmly in place during high - speed rotation.
3. Attachment Mechanism
   There are various ways to attach the abrasive flaps to the backing plate. Commonly, they are either glued or mechanically fastened. Some flap disks use a combination of both methods to ensure the stability of the flaps during operation.

Advantages of Flap Disc over Other Abrasive Tools

Safety and Ease of Operation
Flap discs generate relatively low reaction forces during grinding. This makes them easier to control compared to large rigid grinding wheels, reducing the risk of injury due to tool rebound. For example, when used with a handheld grinding device, even less-experienced operators can perform grinding operations more stably.
They are easy to install and replace. The installation process of flap discs on grinding equipment is simple and quick, enabling operators to change different grit or type of flap discs in a short time according to different grinding tasks, enhancing work efficiency. In contrast, some complex-structured abrasive tools may have cumbersome installation and replacement procedures.

Usage Tips:

• Always match the flap disk to the material being worked on.
• Use the appropriate speed and pressure to maximize effectiveness and minimize wear.
• Regularly inspect the disk for wear and replace it as needed to ensure safety and performance.

Characteristics of flap disk

Good Heat Dissipation: During the grinding process, heat is generated. Flap discs are designed to dissipate heat effectively. The open structure of the flaps allows air to circulate, which helps to cool down the grinding area. This not only protects the workpiece from overheating and potential damage but also extends the life of the abrasive flaps.
Controllable Aggressiveness: Different flap discs are available with varying levels of abrasiveness. This allows users to select the appropriate disc according to the specific requirements of the task. For example, a more aggressive flap disc can be used for heavy material removal, while a finer one is suitable for achieving a smooth and polished finish.

Production Factory:

Total Area: 47,000㎡

Production workshop: 22,000㎡

Lifting Capacity:100 tons

Annual output:100,000 tons

Main Products:

Bailey bridge(Compact-200, Compact-100, LSB, PB100, China-321,BSB)

Modular bridge( GWD, Delta, 450-type,etc),

Truss Bridge,Warren bridge,

Arch bridge, Plate bridge,Beam bridge,Box girder bridge,

Suspension bridge,Cable-stayed bridge,

Floating bridge,etc

Certificates:

ISO9001, ISO14001,ISO45001,EN1090,

CIDB,COC,PVOC,SONCAP,etc

Experience:

40 sets of Bailey bridges to Colombia Government

4 Sets LSB (Logistics Support Bridge) to Ministry of Defence Malaysia

45 sets of Compact-200 and 100 bailey bridges to Myanmar Railway Ministry

23 sets of compact-200 bailey bridges to Ecuador Highway Department

110M Truss Bridge for Laos Mekong river

500m modular bridges for Phnom Penh capital of Cambodia

1,600m Steel bridge to Xuanmenwan bridge in Zhejiang province,China