Bluetooth Optical Probe for Meter Testing Accessory

Brand Name:GENY
Certification:ISO, CE
Model Number:Bluetooth Optical Probe
Minimum Order Quantity:1
Delivery Time:6~8weeks
Payment Terms:T/T, L/C, D/P, T/T
Contact Now

Add to Cart

Verified Supplier
Location: Guangzhou China
Address: ROOM 107, 1ST FLOOR, No. 602 GUANGSHAN ER ROAD, TIANHE DISTRICT, GUANGZHOU, CHINA POSTCODE: 510663
Supplier`s last login times: within 32 hours
Product Details Company Profile
Product Details

Bluetooth Optical Probe for Meter Testing Accessory


1. Introduction


BTIR is a transparent data transmission module used for meter reading. It transfers IR data to mobile application via Bluetooth low energy 4.2. It provides a new way to read meter data by optical port.


Figure 1 Parameters

 ParameterDescription
1Battery100mAh
2Charging voltageDC 5V
3Charging current1A
4RadioBluetooth low energy 4.2
5InterfaceMicro USB
6Operating temperature-40℃~70℃
7Dimensions32×32×17mm
8RechargeKM50 can be fully charged in 2 hours and last for 8 hours

2. Getting started


There are 1 power button and 2 LED indicators on the module.



Press and hold the power button for 2s to turn on the BTIR tool. When the BTIR is running, press and hold the power button for 2s to shut down.

LED indicate the module work status. Power indicator which is red indicates the battery status. BLE indicator which is green indicates the Bluetooth work status.


Figure 2 LED indicators


IndicatorStatusDescription
1Power indicator (RED)Permanently OFFFull battery
0.5s ON / 0.5s OFFLow battery
BlinkReceiving IR data
Permanently ONCharge complete
2BLE status indicator (GREEN)0.1s ON/0.9s OFFBLE is broadcasting and ready for connection
0.5s ON/0.5s OFFConnecting
Permanently ONConnected
BlinkReceiving BLE data

2.1. Using app to make connection


As for Android version 8.1.0, first, turn on the module to put it into broadcast status, so that it can be discovered by other devices. Then open the application installed in phone or pad, and click the START SCANNING button. (NOTE: Bluetooth option must be enabled). After that, press the CONNECT button of one device to make connection.


,


Module will send pairing request for the first connection, and the default password is 123456.




China Bluetooth Optical Probe for Meter Testing Accessory supplier

Bluetooth Optical Probe for Meter Testing Accessory

Inquiry Cart 0