Complex And Harsh Environments Rotameter Flow Meter With Turbid Opaque Or Corrosive Fluids

Description

A plastic rotor flowmeter is an instrument that measures flow using the buoyancy balance of a rotor in a fluid flow. Its structure is similar to that of a metal rotor flowmeter, but it is made primarily of plastic materials to facilitate handling of fluids in specific applications. Here are the details about the plastic rotor flowmeter:

Structure and working principle

1. Structure:
- **Plastic pipe**: The main component of the flowmeter is a transparent plastic tube, so that the status of the rotor can be clearly observed.
- **Rotor**: A plastic rotor located inside a plastic tube, usually conical or cylindrical. The material and shape of the rotor enable it to float in the fluid.
- **Scale**: There is usually a scale inside the pipe to help read the height of the rotor and determine the flow rate.
- **Seal**: Used to prevent fluid leakage and ensure the accuracy of the measurement.

2. Working principle:
- **Fluid flow**: When the fluid passes through the plastic pipe, the flow of the fluid pushes the rotor. The rising position of the rotor in the pipe is proportional to the flow rate of the fluid.
- **Buoyancy balance**: The buoyancy of the rotor is related to the flow rate of the fluid. As the flow increases, the rotor moves up; as the flow decreases, the rotor moves down.
- **Reading**: The flow value can be read directly by observing the position of the rotor on the scale. Modern flow meters may also be equipped with sensors and electronic displays to provide more accurate readings.

Advantages

- Low cost: Plastic rotor flowmeters are cheaper to manufacture than metal rotor flowmeters, so they can be used in situations where the economic budget is tight.

- Corrosion resistance: Plastic materials have good resistance to many chemicals and corrosive fluids, which makes them suitable for some special applications.
- Lightweight: Plastic rotor flowmeters are generally light and easy to install and maintain.
- Transparent pipe: Transparent plastic pipe allows direct observation of the status of the rotor, which helps to monitor and inspect visually.

Limitations

- Limited temperature resistance: Plastics are generally not as resistant to high temperatures as metals, so they are suitable for applications with lower temperature requirements.
- Limited pressure resistance: Plastic rotor flowmeters are generally not suitable for high pressure environments because plastic pipes have limited pressure resistance.
- Mechanical strength: Plastic materials have low mechanical strength and may be affected by high flow rates or high fluid impact.

Application fields

Plastic rotor flowmeters are suitable for the following fields:
- Laboratory: used to measure the flow of liquid or gas in the laboratory.
- Chemical industry: suitable for flow monitoring of certain chemicals, especially less corrosive chemicals.
- Water treatment: used for flow measurement and control in water treatment processes.
- Food and beverage: suitable for processing fluids in food and beverages, especially under low temperature and low pressure conditions.

In short, plastic rotor flowmeters provide an effective flow measurement solution in many fields with their economy, corrosion resistance and applicability.

BTMF series micro metal tube float flowmeter is a variable area flow meter based on float position measurement. The new design makes it possible to measure tiny flows. Especially suitable for measuring small flow rates of liquids and gases. It adopts an all-metal structure, has small size, low pressure loss, and large range ratio (10:1). It is widely used in various industries for flow measurement and processes in complex and harsh environments, such as small flow rates, low flow rates, and various harsh medium conditions. Control, especially suitable for measuring turbid, opaque or corrosive fluids.

The Turbine Flow Meter is a type of Impeller Flowmeter used for the precise measurement of low-viscosity fluids such as tap and demineralised water, light fuel oil, liquefied gases, ethanol gasoline, Pharmaceutical fluids, non-corrosive chemicale solvents etc.

Turbine Flow Meter measure volumetric flow and flow quantities, where flow passing through the tube is measured by the average velocity of the streaming fluid. The sensor of Turbine reacts to the average velocity of fluid with multi-blades rotor so as to speculating the instantaneous and the accumulative flow.

Specification

FAQ
1. Q: What information need to be provided to choose the suitable model?
A: Application field, Nominal pressure ,Medium & medium temperture , Power supply , Output,
Flow range, Accuracy, Connection and other parameters.
2. Q: Are you a trade company or a manufacturer?
A: We are an ISO approved manufacturer specialized in level and flow measuring instruments.
OEM & ODM service are available. Welcome to visit us in China.
3. Q: What is your MOQ?
A: To start our cooperation, sample order is acceptable.
4. Q: What is your delivery date for the Intelligent Mini Micro Turbine Fuel Oil Diesel Flow Meter?
A: The delivery date is about 3-15 working days after receipt of payment.
5. Q: What is your payment terms?
A: We support T/T, PayPal ,Western Union.
For mass production order, it is 30% deposit in advance and 70% balance before shipment.
6. Q: Do you have a warranty for the Flow Meter?
A: Yes, we have the warranty of 12 months.

Suzhou Beite Smart Instrument Co., Ltd. was established in 2007.It is an automated instrument manufacturer integrating R&D, design, manufacturing, sales and system complete services.

After years of development, the company's new factory covers an area of ​​15 acres, with a workshop area of ​​4000m2. It has complete production and processing equipment. The electronics workshop has a modern SMT assembly line and a complete electronic design laboratory. The machinery workshop has multiple precision CNC lathes, ordinary lathes, CNC milling machines, fully automatic circumferential seam welding machines, drilling machines and other equipment. The calibration workshop has two liquid calibration test lines and one small and medium flow gas calibration test line. Each product has been actually calibrated and verified to ensure product quality.

The company has strict quality control in every aspect from product design, raw material procurement and processing, manufacturing and assembly, testing and inspection to product delivery, striving for zero defect products, and using scientific management, strict technology, sophisticated equipment, to ensure product quality. quality. The company's products, from hardware to software, all have the company's independent intellectual property rights.

The company's products are widely used in municipal administration, petroleum, chemical industry, metallurgy, pharmaceuticals, thermoelectric papermaking, food environmental protection and scientific research fields, and are exported to Southeast Asia, South America, Europe and other countries. Beite's integrity, strength and product quality have been recognized by the industry.

The company's main products include metal tube float (rotor) flowmeters, glass rotor flowmeters, plastic tube flowmeters, turbine flowmeters, thermal gas mass flowmeters, gas turbine flowmeters, intelligent electromagnetic flowmeters, vortex flowmeters, pipeline ultrasonic flowmeters, magnetic flap level meters, ultrasonic level meters, intelligent radar level meters, pressure transmitters, flow totalizers, batch control systems, etc. There are more than a dozen series and hundreds of varieties.