High Speed Centrifugal Chemical Spray Dryer Machine 220V/380V

High speed centrifugal spray drying machine

Descriptions

Production spray dryer is most suitable for producing solid powder or particle products from liquid materials, such as: solution, emulsion, suspension and pumpable paste states, for this reason, when the particle size and distribution of the final products, residual water contents, mass density and the particle shape must meet the precise standard, spray drying is one of the most desired technologies.

Principle

After been filtered and heated the air enters into the air distributor on the top of the dryer. The hot air enters into the drying room in the spiral form and uniformly. Passing through the high-speed centrifugal sprayer on the top of the tower, the material liquid will rotate and be sprayed into the extremely fine mist liquid beads. Through the very short time of contacting the heat air, the materials can be dried into the final products. The final products will be discharged continuously from the bottom of the drying tower and from the cyclones. The waste gas will be discharged from blower.

Features

• drying speed of Production spray dryer is high when the material liquid is atomized, the surface area of the material will increase greatly. In the hot-air flow,95%-98% of water can be evaporated at a moment. The time of completing the drying is only several seconds. This is especially suitable for drying the heat sensitive materials.
• Its final products own the good uniformity, flow ability & solubility. And the final products are high in purity and good in quality.
• The production procedures are simple and the operation and control are easy. The liquid with moisture contents of 40-60%(for special materials, the contents might be up to 90%).can be dried into the powder or particle products once a time. After the drying process, there is no need for smashing and sorting, so as to reduce the operation procedures in the production and to enhance the product purity. The product particle diameters, looseness and water contents can be adjusted through changing the operation condition within a certain range. It is very convenient to carry out control and management.

The company is located in the economically developed Changzhou Economic Development Zone, with a registered capital of 20 million yuan. Mainly engaged in the research and development of environmental protection technology, the design of environmental protection projects (SNCR.SCR), the processing, production and sales of environmental protection equipment, and the innovation and transfer of activated carbon regeneration technology.
Although the company was established not long ago, it has achieved good results and industry recognition, and has now applied for three invention patents and multiple new utility patents.
Relying on the technology of Nanjing Forestry University, the company is committed to the development and application of waste activated carbon regeneration projects, and has developed a set of advanced waste activated carbon regeneration processes, especially the regeneration of hazardous powdered carbon, and has also developed a set of advanced waste activated carbon regeneration processes including SNCR and SCR desulfurization and denitrification. Various supporting equipment undergo targeted research and development and optimized design to make the entire system process smooth and unobstructed. The exhaust gas completely meets the emission standards. At present, hazardous waste activated carbon powder and granular carbon regeneration technology remains the leader in the country and has been verified in actual operation.
The company also provides sludge preparation ceramsite technology, paint slag regeneration technology, harmless disposal of chemical waste residues, waste acid disposal technology, biomass gasification and power generation technology, etc. The company is equipped with special equipment and experimental devices, and customers are welcome to come to the company for on-site guidance. , inspection.