High Power 220V Pulse Igniter for Forced Exhaust Water Heaters Thermostat Control
Brand Name:Vanka
Certification:ISO9001：2015,CE
Minimum Order Quantity:50 Sets
Delivery Time:30 work days
Payment Terms:L/C,T/T,Western Union,MoneyGram
Place of Origin:China
Contact Now
Add to Cart
Verified Supplier
Location:
Zhongshan Guangdong China
Address:
8-4 Floor, No. 323, Dongfeng Avenue South, Anle Village, Dongfeng Town, Zhongshan, Guangdong, China
Supplier`s last login times:
within 25 hours
Product Details
Company Profile
Product Details
High Power 220V Pulse Igniter for Forced Exhaust Water Heaters
Thermostat Control
High-energy 220V thermostatic pulse igniter designed for forced-exhaust gas water heaters. Features powerful pulse output and thermostat-compatible interface for fast, reliable ignition. Dual-pulse protection and multiple safety checks prolong service life and improve reliability. Easy to install and compatible with many forced-vent heater models.
Key Features
Fast Ignition: High-energy pulse output ensures instant ignition with zero delay
Precise Control: Compatible with thermostat interface for accurate water temperature adjustment
High Success Rate: Dual pulse and dual safety ignition logic for more reliable ignition
Enhanced Safety: Multiple protections including flameout detection, over-voltage, and short-circuit protection
Easy Installation: Simple setup, compatible with various forced-exhaust gas water heaters
Technical Specifications
| Item | Specification |
|---|---|
| Input Voltage | AC 220V ±10% |
| Output Voltage | 12–15 kV (High-Voltage Pulse) |
| Operating Frequency | 50/60 Hz |
| Ignition Method | Pulse Ignition (Single/Dual Pulse Optional) |
| Compatible Type | Forced-Exhaust Gas Water Heaters (Thermostatic/Standard) |
| Protection Rating | IPX0 (Waterproof version optional) |
| Operating Temperature | -10℃ ~ +60℃ |
| Service Life (Typical) | ≥100,000 Ignitions (Depending on Use) |
| Wiring | Input Wire, Ground, Thermostat Signal Wire, Ignition Output Wire |
| Dimensions (Typical) | 60 x 41 x 29 mm (Example) |
| Weight (Typical) | 100–120 g |
Frequently Asked Questions
Q1: Which water heaters are compatible with this igniter?
A1: This module is specifically designed for forced-exhaust
(fan-assisted) gas water heaters. It is compatible with most
220V-powered models that have thermostat/temperature control
interfaces. For exact compatibility, please provide the wiring
diagram or the heater model number.
Q2: Does installation require a technician?
A2: If you have basic electrical and gas appliance safety
knowledge, you can replace the wiring according to the manual. If
not, it is strongly recommended to have a professional technician
perform the installation to ensure safety.
Q3: What should I do if ignition fails?
A3: First, check whether the power supply, grounding, and gas
source are normal, and whether the spark electrode gap (recommended
8–12 mm) is correct. If the issue persists, replace the ignition
module or contact after-sales support.
Q4: Is there a waterproof version available?
A4: Yes, some models are available with waterproof or
moisture-resistant treatment. If the product will be exposed to
humid environments, it is recommended to choose a waterproof
version.
Q5: What is the warranty period?
A5: The standard warranty is 12 months (depending on supplier).
Please note that non-original modifications or damage caused by
human error are usually not covered under warranty.
High Power 220V Pulse Igniter for Forced Exhaust Water Heaters Thermostat Control
Inquiry Cart
0