Inconel601 Nickel Alloy Forging Bar UNS N06601 Alloy Forging Bars ASTM Standard

Inconel601 Nickel Alloy Forging Bar UNS N06601 Alloy Forging Bars ASTM Standard

Inconel 601 is a nickel-chromium alloy with excellent resistance to high-temperature oxidation, carburization, and other forms of thermal degradation. It is widely used in applications that require high strength and resistance to extreme environments, such as aerospace, chemical processing, and heat treatment industries. The forging bar form of Inconel 601 is particularly valued for its ability to be shaped into complex components while maintaining its superior mechanical and chemical properties.

Chemical Composition:

The chemical composition of Inconel 601 typically includes:

Nickel (Ni): 58.0% - 63.0% (primary element, providing high-temperature strength and corrosion resistance)

Chromium (Cr): 21.0% - 25.0% (enhances oxidation and corrosion resistance)

Iron (Fe): Balance (provides structural integrity)

Aluminum (Al): 1.0% - 1.7% (improves oxidation resistance by forming a protective oxide layer)

Carbon (C): ≤ 0.10% (minimized to prevent carbide formation)

Manganese (Mn): ≤ 1.0%

Silicon (Si): ≤ 0.50%

Copper (Cu): ≤ 1.0%

Sulfur (S): ≤ 0.015%

Phosphorus (P): ≤ 0.02%

Mechanical Properties:

Inconel 601 forging bars exhibit the following mechanical properties:

Tensile Strength: ≥ 655 MPa (95 ksi)

Yield Strength (0.2% offset): ≥ 345 MPa (50 ksi)

Elongation: ≥ 30% (in 50 mm)

Hardness: Typically 150 - 200 HB (Brinell Hardness)

These properties can vary slightly depending on the heat treatment and forging process.

Forging Process:

The forging of Inconel 601 bars involves several critical steps to ensure the material retains its high-performance characteristics:

Heating: The billet or ingot is heated to a temperature range of 1095°C to 1230°C (2000°F to 2250°F) to achieve optimal forgeability.

Forging: The heated material is forged into the desired bar shape using hammers, presses, or other forging equipment. The process is carefully controlled to avoid cracking or excessive grain growth.

Heat Treatment: After forging, the bar is typically subjected to a solution annealing treatment at 1150°C to 1200°C (2100°F to 2200°F), followed by rapid cooling (water quenching or air cooling) to achieve a uniform microstructure and optimal mechanical properties.

Surface Finishing: The forged bar may undergo machining, grinding, or polishing to achieve the required dimensions and surface finish.

Key Properties:

High-Temperature Oxidation Resistance: Inconel 601 forms a protective oxide layer (primarily chromium oxide and aluminum oxide) that prevents further oxidation at temperatures up to 1250°C (2282°F).

Carburization and Sulfidation Resistance: The alloy resists degradation in environments containing carbon or sulfur compounds.

Excellent Mechanical Strength: Maintains high strength and creep resistance at elevated temperatures.

Thermal Stability: Performs well under cyclic heating and cooling conditions.

Corrosion Resistance: Resists corrosion in oxidizing and reducing atmospheres, as well as in aqueous environments.

Applications:

Inconel 601 forging bars are used in a variety of demanding applications, including:

Aerospace Components: Combustion liners, afterburner parts, and turbine seals.

Industrial Furnaces: Radiant tubes, muffles, and heat treatment fixtures.

Chemical Processing: Reactor components, heat exchangers, and piping systems.

Power Generation: Gas turbine components and heat recovery systems.

Petrochemical Industry: Catalytic reforming systems and flare stacks.

Advantages:

Exceptional resistance to high-temperature oxidation and scaling.

High strength and durability in extreme environments.

Good fabricability and weldability.

Long service life in corrosive and high-temperature applications.

Standards and Specifications:

Inconel 601 forging bars conform to various international standards, including:

ASTM B166: Standard specification for nickel-chromium-iron alloy (UNS N06601) bars, rods, and wire.

AMS 5711: Aerospace material specification for nickel alloy bars, forgings, and rings.

EN 10095: European standard for heat-resistant steels and nickel alloys.

Inconel 601 forging bars are a premium material choice for applications requiring exceptional high-temperature performance, oxidation resistance, and mechanical strength. Their versatility and reliability make them indispensable in industries where components are exposed to extreme thermal and corrosive conditions. The forging process ensures that the bars can be tailored to meet specific design requirements while maintaining the alloy's superior properties.

More Grades:

Hunan Dinghan New Material Technology Co.,Ltd. (DINGSCO) specialized in Nickel Based Corrosion Resistant and High Temperature alloys products which used in the world’s most technically demanding industries and applications.

We have complete advanced technology facilities to produce best quality alloys to meet exacting your specifications such as VIM (Vacuum lnduction Melting) furnace to provide high purity Alloys,ESR (Electro Slag Re-melting) furnace to enhances the structure and purity of the Alloys, and CNC machining equipments (Lathe, Wire cutting, Drilling,Milling) to provide high precision finished products.

We are dedicated to providing our customers with best quality products,fastest possible deliveries, most competitive prices of Nickel Based Corrosion Resistant and High Temperature alloys in bars,rods,forged flanges, valve parts, forged shapes (shafts, discs, blocks, hubs,rings, cylinders and tailor shapes) according to ASTM,ASME,API,AMS, NACE and other industry standards.

We can help you gain a competitive edge in the market by responding to a rush quote in less than 24 hours and even complex requests for price and delivery quotations are responded to within 48 hours.