Remote Control Fingerprint Control Board Change Password Scalable
Certification:CE
Minimum Order Quantity:1
Delivery Time:Peak Season Lead Time: within 15 workdays Off Season Lead Time: within 15 workdays
Payment Terms:T/T, PayPal
Place of Origin:China
Packaging Details:Carton
Contact Now
Add to Cart
Verified Supplier
Location:
Hangzhou Zhejiang China
Address:
Room 310, Building 1-B, No. 279 Shiqiao Road, Xiacheng District, Hangzhou, Zhejiang, China 310012
Supplier`s last login times:
within 28 hours
Product Details
Company Profile
Product Details
Grow Kl216+R502-AW Round LED Fingerprint Access Control Board
Technical Parameters
DC10-30V, Relay Output, Jog Mode(0.5s-99s)/Ignition
Mode/Self-locking Mode.
Managed by SET button or remote control(add/delete fingerprint to
different three database,change relay time and so on)
·Power supply:DC10V--30V
·Standby current:<40mA
·Output:Relay(Max. current: 10A)
·Fingerprint capacity:200 pieces
·Relay Function:Jog Mode(0.5s-99s)/Ignition Mode/Self-locking Mode
Operation Instruction
1. SET Button:1.1 Press SET button shortly,system in register state and indicator
light flash fast, press multiple times for each fingerprint,
fingerprint register successful when hearing music.
Fingerprint can be registered continuously when system in register state; if no need adding fingerprint more, waiting a few seconds.(By default, it will be saved in fingerprint database 1,when the current database is full, it is automatically saved to the next database.)
Fingerprint can be registered continuously when system in register state; if no need adding fingerprint more, waiting a few seconds.(By default, it will be saved in fingerprint database 1,when the current database is full, it is automatically saved to the next database.)
1.2 When back to factory default, press SET button until hear "Di"
long beep and
music,means initialization operation successful
music,means initialization operation successful
2. Remote Control:
When using remote control, pls touch the module to wake up first.
2.1 Blue indicator lighted means in programming stated, music means
operation successful
Default password: 123456, password length: 6 numbers
2.2 Change password: Press *password*1*new password*new password#
2.3 Register fingerprint: Press *password*2*Database(1-5)# ,Exit fingerprint in register
state when press * button or waiting a few seconds.
E.g.: Register in Database 3: Press *password*2*3#
2.4. Delete Fingerprint: Press *password*3*Database(1-5)#
E.g.: Delete in Database 3: Press *password*3*3#
2.5. Relay Time Setting in jog mode: Press *password*4*Time(0.5s-99s)#
E.g.: Set 0.5s: Press *password*4*00#
E.g.: Set 1s: Press *password*4*01#
E.g.: Set 5s: Press *password*4*05#
E.g.: Set 99s: Press *password*4*99#
2.6. Setting Work Mode:
Jog Mode: Press *password*5*1#
Ignition Mode: Press *password*5*2#
Self-locking Mode:Press *password*5*3#
2.7. Standby Mode Selection:
Standby Mode On: Press *password*6*0#
Standby Mode Off: Press *password*6*1#
2.8. Back to Factory Mode: Press *password*7*password#
2.9. Password Using: Press *password and relay closed, press # and relay opened
Note: Any fingerprint can be used in the factory state, but the
function will be invalid after the fingerprint is registered.
R502-AW Specifications
| Model | R502-AW |
| Type | Capacitive Fingerprint Module |
| Interface | UART(TTL) |
| Resolution | 508 DPI |
| Voltage | DC 3.3V |
| Fingerprint Capacity | 200 |
| Sensing array | 192*192 pixel |
| Working current | 20mA |
| Standby current | Typical touch standby voltage: 3.3V, Average current: 2uA |
| Fingerprint module external size | 50*50*8.4 (mm) |
| Effective collection area | Diameter 15.5 (mm) |
| Enclosure material | Zinc alloy |
| Connect control board | K200-3.3/K202/K215-V1.2/K216 |
| Connector | MX1.0-6Pin |
| LED Control | YES |
| LED Color | Purple and Blue and Red |
| Scanning Speed | < 0.2 second |
| Verification Speed | < 0.3 second |
| Matching Method | 1:1; 1:N |
| FRR | ≤1% |
| FAR | ≤0.001% |
| Work environment | -20C ---60C |
| Work Humidity | 10-85% |
| Anti-static capacity | 15KV |
| Abrasive resistance intensity | 1 million times |
| Communications baud rate (UART): | (9600 × N) bps where N = 1 ~ 12(default N = 6, ie 57600bps) |
Files
·Provide Free Reference SDK Files for Arduino, Android,.Net,Windows and so on.·Provide User Manual
R502-AW Test program operation display video on Youtube: https://youtu.be/Q82Zg4iFHOA
Remote Control Fingerprint Control Board Change Password Scalable
Inquiry Cart
0