Grow K236-A DC6V 4*AAA Fingerprint Control Board with Battery Case
Certification:CE
Minimum Order Quantity:1
Delivery Time:Peak Season Lead Time: within 15 workdays Off Season Lead Time: within 15 workdays
Payment Terms:T/T, PayPal
Place of Origin:China
Packaging Details:Carton
Contact Now
Add to Cart
Verified Supplier
Location:
Hangzhou Zhejiang China
Address:
Room 310, Building 1-B, No. 279 Shiqiao Road, Xiacheng District, Hangzhou, Zhejiang, China 310012
Supplier`s last login times:
within 28 hours
Product Details
Company Profile
Product Details
Technical Parameters
*K236-A fingerprint control board, using battery box and circuit
board integrated and low power consumption design.
*The power supply is 4*AAA battery.
*Have administrator and user fingerprint function.
*Two output modes can be selected, suitable for electronic lock body, relay and other equipment.
*K236-A can be used with R502, R502A, R502AW, R503 fingerprint module.
·Power supply: DC 6V (4*AAA Battery)
·Control Board Stand by current: <7uA
·Fingerprint capacity:
Administrator fingerprint: 20 pieces
User fingerprint: 60 pieces
·Output: DC5-6V, 300mA
·Size:87*47.1*16.5mm
*The power supply is 4*AAA battery.
*Have administrator and user fingerprint function.
*Two output modes can be selected, suitable for electronic lock body, relay and other equipment.
*K236-A can be used with R502, R502A, R502AW, R503 fingerprint module.
·Power supply: DC 6V (4*AAA Battery)
·Control Board Stand by current: <7uA
·Fingerprint capacity:
Administrator fingerprint: 20 pieces
User fingerprint: 60 pieces
·Output: DC5-6V, 300mA
·Size:87*47.1*16.5mm
Operation Instruction
1.Register Administrator Fingerprint:Press SET button shortly,system in administrator register status and blue indicator light flash fast, put the same finger with multiple times in fingerprint collection area until hearing music means fingerprint register successful.Fingerprint can be registered continuously.If no need for adding fingerprint, waitinga few seconds to exit.2.Register User Fingerprint:Press the administrator fingerprint until the blue indicator light flash fast and hear the music,means can add user fingerprint.Put the same user finger with multiple times in fingerprint collection area until hearing music means fingerprint register successful. Fingerprint can be registered continuously. If no need for adding fingerprint, waiting a few seconds to exit.
3.Delete User Fingerprint:Press the administrator fingerprint until the red indicator light flash fast and hear"Di",move away the finger,the red indicator light flash slowly,press finger again,hear"Di-Di-Di"and music,means user fingerprints are deleted.
4.Back toFactory Default:Long press the SET button until hear "Di-Di-Di" beep and release the button,means initialization operation successful.
5.Mode Selection:set by the toggle switch:
[Right]:Output DC5V and keep 0.5 second; stop 5 seconds,then minusvoltage outputted and keep 0.5 seconds.
[Left]:Keeping output DC5V until removing the finger.
Note:
1.When the voltage is less than DC4.7V, the red light lightens, means the low voltage warning.
2.In the "[Left]" mode,when need to register/delete user fingerprint,after press the administrator fingerprint successfully,lifting the finger then press the same administrator finger again until the blue/red indicator light flash fast and hear the music,then it can register/delete user fingerprint.
3.Any fingerprint can be used when factory default, and this function disabled after fingerprint registered.
Files:
·ProvideFree Reference SDK Files for Arduino, Android,.Net,Windows and so on.
·Provide User Manual
If need SDK files,pls contact us.
Grow K236-A DC6V 4*AAA Fingerprint Control Board with Battery Case
Inquiry Cart
0