Add to Cart
·Power supply: DC12V
·Output: Relay(Max. current: 10A)
·Fingerprint capacity:
Administrator Fingerprint: 10 pieces
User Fingerprint: 60 pieces(10 fingerprints per relay position)
·Password capacity:
Administrator Password: 1 group(Default password is 123456)
Relay Password: 6 groups(1 group per relay position)
·Management: SET Button or Fingerprint or Password
K1-K6 SET Button corresponds to No.1-6 Relay Output
(Before operation, it is necessary to wake up standby. Touch the
fingerprint module, and the indicator light is on, then it can be
set.)
1.SET Button(K1-K6)
1.1 Add User fingerprint:
Press SET button shortly,blue indicator light flash fast means
system in register state, put the finger in the collection
area,fingerprint register successful when hearing music. 10 pieces
fingerprint can be registered continuously when system in register
state; if no need adding fingerprint more, waiting a few seconds to
exit.[Each SET button(K1-K6) can register 10 pieces fingerprints]
1.2 Delete fingerprint:
1.2.1 Delete single relay position fingerprints: Long press the
corresponding SET button,blue indicator light flash fast,hear long
"Di" beep,loosen the finger,the relay indicator light on, means
this location of the fingerprints are deleted;
1.2.2 Delete all relay position fingerprints(Back to factory
default):Long press any SET button to hear long "Di" beep twice,
all indicator light on, means initialization operation
successful,back to factory default.
2.Keypad Settings
For all operation Settings,need to press the administrator
fingerprint/password first. The default password is 123456.
Password length: 3-6 bits
2.1 Set Administrator Fingerprint:Touch the fingerprint module, and
the indicator light is on,press 123456[OK]1[OK]
Blue indicator light flash fast means system in register state, put
the finger in the collection area,fingerprint register successful
when hearing music. 10 pieces fingerprint can be registered
continuously when system in register state; if no need adding
fingerprint more, waiting a few seconds to exit.If the fingerprints
is full, will have "Di Di Di" warning tone.
★In addition to setting functions, administrator fingerprint can
unlock all relay switches.
If unlocking No.3 relay, press the number 3 after the administrator
fingerprint passes.
Note: When the administrator fingerprint is repeated with the user
fingerprint,priority is given to the administrator fingerprint
function.
2.2 Clear the System and Back to Factory Mode:Pass the
administrator's fingerprint/password,enter in edit mode: Press:[OK]
1[C](Long press C)
All relay lights are on, indicating that the emptying is successful
and back to factory mode.
2.3 Set Administrator Password: Pass the administrator's
fingerprint/password, enter in edit mode: Press:[OK]2[OK]New
Password[OK]
After the password is set successfully, the previous password will
be overwritten and invalid. The admin password only can be used for
admin settings and cannot be unlocked.(Password length: 3-6 bits)
2.4 Set User Fingerprint: Pass the administrator's
fingerprint/password, enter in edit mode: Press:[OK]3[OK]Relay
Position(1-6)[OK]
Blue indicator light flash fast means system in register state, put
the finger in the collection area,fingerprint register successful
when hearing music. 10 pieces fingerprint can be registered
continuously when system in register state; if no need adding
fingerprint more, waiting a few seconds to exit.If the fingerprints
is full, will have "Di Di Di" warning tone.(10 fingerprints per
relay position)
Note: when one finger registered in several relay positions at the
same time,the finger can open different relays, and the interval
time is 0.5 seconds
2.5 Delete User Fingerprint:Pass the administrator's
fingerprint/password, enter in edit mode: Press:[OK]3[C]Relay
Position(1-6)[C](Long press the second C)
The light in this location will turn on and can hear music,
indicating that the fingerprint of the relay position has been
deleted successfully
2.6 Set Relay Password: Pass the administrator's
fingerprint/password, enter in edit mode: Press:[OK]4[OK]Relay
Position(1-6)[OK]New Password[OK]
The password length is 3-8 digits. The relay password cannot be
repeated with the administrator password. If repeated,will have "Di
Di Di" warning tone.
2.7 Delete Relay Password: Pass the administrator's
fingerprint/password, enter in edit mode: Press:[OK]4[C]Relay
Position(1-6)[C](Long press the second C)
The light in this location will turn on and can hear music,
indicating that the password of the relay position has been deleted
successfully.
2.8 Set Relay Mode: Pass the administrator's fingerprint/password,
enter in edit mode:Press:[OK]5[OK]Relay Position(1-6)[OK]Relay
Mode(1-6)[OK]
Mode 1: Relay Time 0.5s
Mode 2: Relay Time 1s
Mode 3: Relay Time 2s
Mode 4: Relay Time 3s
Mode 5: Relay Time 10s
Mode 6: Relay Time 20s
K219-B only can be used together with G16 fingerprint module