High-quality Motorcycle Parts & Accessories, Magneto Stator Coil for TVS NEO 110

Product Introduction

High-quality Motorcycle Parts & Accessories, Magneto Stator Coil for TVS NEO 110.

The stator coil of a magnetic motor is a fixed part of the magnetic motor, usually made

of insulated wires wound and installed on the stator core of the magnetic motor.
Electricity generation: When the rotor of a magnetic motor rotates, alternating current

is generated in the stator coils through the principle of electromagnetic induction.
Electricity transmission: The generated alternating current is transmitted to other

systems of the motorcycle, such as the ignition system, charging system, etc., to

support the normal operation of the motorcycle.

Coil material: It is usually made by winding high-quality insulated wires to ensure

stable operation in harsh environments such as high temperature and high humidity.
Installation method: Fixed on the stator core of the magnetic motor, with a certain

gap between it and the rotor, so that electromagnetic induction can be generated

when the rotor rotates.

The role of TVS NEO 110 motorcycle
Ignition system: The electrical energy generated by the stator coil of the TVS NEO

110 motorcycle magnetic motor is transmitted to the ignition system to generate

high-voltage electric sparks, ignite the mixture, and drive the engine to operate.
Charging system: Some of the electrical energy may also be used to charge

the motorcycle battery, ensuring that the battery remains in good working

condition at all times.
matters needing attention
Maintenance: Regularly check the insulation performance and connection

of the stator coils of the magnetic motor to ensure that there are no faults such

as short circuits or open circuits.
Replacement cycle: According to the usage of the motorcycle and the manufacturer's

recommendations, regularly replace the aging magnetic motor stator coils to ensure

the performance and safety of the motorcycle.

The stator coil of the TVS NEO 110 motorcycle magnetic motor is an important

component in the TVS NEO 110 motorcycle engine. It generates electrical energy

through the principle of electromagnetic induction and transmits it to other systems

of the motorcycle to support its normal operation. During use, it is necessary to pay

attention to the maintenance and replacement cycle of the magnetic motor stator

coil to ensure the performance and safety of the motorcycle.

Replacement steps
1. Preparation work
Ensure that the motorcycle's power is turned off and unplug the battery cable to

avoid short circuits during the replacement process.
Prepare the necessary tools and materials, such as screwdrivers, wrenches,

insulation tape, new magnetic motor stator coils, etc.
2. Disassemble the old coil
Find the position of the stator coil of the magneto, which is usually located

inside the engine and requires disassembling part of the engine casing to expose it.
According to the specific structure of the motorcycle and the manufacturer's

instructions, remove the screws or fixtures that fix the stator coil.
Carefully remove the old coil from the stator core, being careful not to damage the

surrounding components.
3 Inspection and Cleaning
After removing the old coil, check whether the stator core is damaged or worn,

and repair or replace it if necessary.
Clean the stator core and surrounding components to ensure that there are

no dust, oil stains, or other impurities.
4. Install a new coil
Place the new magnetic motor stator coil on the stator core, ensuring that the position

and direction of the coil are correct.
Use screws or fixtures to fix the new coil onto the stator core, paying attention

to the appropriate tightening force to avoid being too tight or too loose.
5 Connection lines
According to the wiring diagram of the motorcycle, correctly connect the circuit of the

new coil to the motorcycle's electrical system.
Ensure that all connections are secure and reliable, without any looseness or poor

contact.
6 Testing and Debugging
After completing the replacement, reconnect the battery cable and start the

motorcycle for testing.
Check if the stator coil of the magnetic motor is working properly and observe for

any abnormal sounds, vibrations, or temperature rise.
If necessary, further debugging and optimization should be carried out to ensure

the performance and stability of the motorcycle.

Product Paramenters

Guangzhou Yaye Cross Border E-Commerce Co., Ltd.Guangzhou Yaye Cross Border E-Commerce Co., Ltd was established in 2001located in Baiyun District, Guangzhou, with a strong production, researchand development, sales team.
The company mainly engaged in motorcycle accessories, involving the saleof more than 30 models ofnearly 5,000 accessories, under the jurisdictionofYaye, Shuaiyin, AMG and other independent brands.
Products are exported to Africa, the Middle East, Southeast Asia and othercountries