

Add to Cart
WX17 1w 10k Ohm Single Turn Adjustment Precision Wirewound
Potentiometer
The WX17 wirewound potentiometer is a high-quality electronic
component known for its precise resistance control. With its
wirewound construction, it offers accuracy and stability in
resistance adjustments. The WX17 wirewound potentiometer provides
smooth operation and is suitable for a wide range of applications.
Its durability and reliability make it a preferred choice in
various electronic systems.
Electrical Characteristics | Standard Resistance Range | 100Ω-10KΩ |
Resistance Tolerance | ±5% | |
Linearity | 0.25% | |
Effective Electrical Stroke | 280°±5℃ | |
Terminal resistance | 5ΩMax | |
Rotating Noise | 3%R or 5Ω | |
Insulation Resistance | 100MΩ, 500Vdc, 1minute | |
Withstanding Voltage | 101.3kpa, 500Vac; 8.5kpa, 300Vac | |
Environment Characteristics | Power Rating(300 volts max.) | 2W(70℃), 0W(125℃) |
Operating Temp. Range | -40℃~+125℃ | |
Temperature Coefficient | ±50ppm/℃ | |
Temperature Variation | -55℃~+125℃, 5 No-load cycles,ΔR/R≤±5% | |
Collision | 390m/s2,4000 cycles,R≤±2%R | |
Vibration | (10-50HZ,Amplitude 1.5mm),3 directions, 2H in each direction,ΔR/R≤±3% | |
70℃ Electrical Endurance | 2W,1000h,ΔR≤±2%R | |
Rotational Life | 200(cycles),ΔR≤±2%R | |
Physical Characteristics | Mechanical Angle | 300°±5° |
Starting Torque | ≤10 mN.m | |
Stop Strength | ≤15 mN.m |
Packaging specification: 10 pieces per box
• Industrial Control Systems: Integrated into motor speed controllers, servo systems, and
automation equipment where precise adjustment of speed, position,
or voltage is essential for operational efficiency.
• Power Supplies: Used in variable power supplies and voltage regulators to adjust
and stabilize output voltages across a wide range of load
conditions.
• Audio Equipment: Found in professional audio amplifiers, mixers, and equalizers for
controlling volume levels, tone adjustments, and signal processing.
• Test and Measurement Instruments: Applied in laboratory instruments such as oscilloscopes, signal
generators, and electronic testing equipment to calibrate and
adjust signal levels accurately.
• Medical Devices: Utilized in medical imaging equipment, patient monitoring systems,
and diagnostic devices where precise control of signals and voltage
levels is critical for diagnostic accuracy and patient safety.
• Communications Equipment: Incorporated into radio frequency devices, antenna tuners, and
transceivers for impedance matching and signal tuning to optimize
communication performance.
• Automotive Electronics: Used in vehicle electronics for adjusting sensor signals,
controlling actuators, and managing power distribution in
automotive systems.
• Factory direct supply, no middlemen.
• Completed certificates such as RoHS, REACH, etc and best quality assurance.
• Sufficient production capacity, short delivery time.
• Professional after-sales service team.
• OEM & ODM available.