CAFS1000C Wide Flow Rate Range: 0-60 m/s High Impact Resistance: Withstands 100g impact, commonly known as an air flow meter, is a crucial component in modern automotive electronic control fuel injection systems (EFI). Typically installed in the intake tract between the air filter and throttle body, this sensor measures the amount of air being drawn into the engine. The output signal from the sensor is a primary parameter for controlling fuel injection in the engine management system, directly influencing the engine's power performance, fuel economy, and emission standards.

To achieve the optimal fuel mixture concentration under various operating conditions, the EFI engine must accurately measure the intake air volume in real-time and calculate the necessary fuel injection using the electronic control unit (ECU). Consequently, the air flow sensor is vital for improving energy efficiency and reducing pollutant emissions in modern vehicles.

The CAFS1000C Series has been widely adopted in the automotive and related industries due to its high reliability, stability, accuracy, and cost-effectiveness. The product's application potential is vast.

Key Features

High Accuracy: ±2.0% Full Scale (F.S.) accuracy
Linear Output: No need for temperature compensation
Long-term Stability: Minimal zero-drift
Quick Response: 20 ms response time
Wide Flow Rate Range: 0-60 m/s
High Impact Resistance: Withstands 100g impact
Robust Sensing Core: Solid-state, no surface cavity or fragile film, resistant to blockage and pressure impact
Output Modes: Analog voltage output (1 to 5V) and frequency output (2.05 to 11.69 kHz)
High Reliability: Suitable for relatively wet gas measurements
Operating Temperature: -40°C to 125°C
Storage Temperature: -40°C to 125°C
Humidity Range: 0 to 100% RH
Condensate Water Resistant

Performance Specifications

Functional Items	CAFS1000C Wide Flow Rate Range: 0-60 m/s High Impact Resistance: Withstands 100g impact
Flow Range	10-800 Kg/h (customizable)
Service Voltage	14 VDC
Accuracy	±2.0% FS
Repeatability	<0.5%
Response Time	20 ms (selectable)
Maximum Pressure	0.3 MPa

Output Methods

Frequency Output: 2.05 to 11.69 KHz
Analog Voltage Output: 1-5 V

Environmental Specifications

Operating Temperature: -40°C to 125°C
Storage Temperature: -40°C to 125°C
Humidity: 0-100% RH
Protection Level: IP40
Calibration Method: Air, at 20°C, 101.325 kPa
Material: ABS