CWS29Y Wall Mounted Temperature Humidity And Atmospheric Pressure Transmitter
Brand Name:Star merter
Model Number:CWS29Y
Place of Origin:China
Range:Temperature -40~125°C Humidity 0-100%RH (Relative Humidity) Atmospheric Pressure 0~110kPa(A)
Output:RS485
Power Supply:5~28VDC
Contact Now
Add to Cart
Verified Supplier
Location:
Langfang Hebei China
Address:
Address: Building 20, Tianshan International, Yanjiao Economic Development Zone, Sanhe City, Langfang City, Hebei Province
Supplier`s last login times:
within 2 hours
Product Details
Company Profile
Product Details
CWS29Y wall-mounted temperature, humidity and atmospheric pressure transmitter is carefully designed, suitable for indoor temperature, humidity and atmospheric pressure monitoring in various occasions, with and without display options, and cost-effective.
| Basic parameters | |
| Measuring medium | Gas (compatible with contact materials) |
| Temperature range | -40～125℃ |
| Humidity range | 0-100%RH(Relative humidity) |
| Air pressure range | 0～110kPa(A) |
| Output signal | RS485 |
| Supply voltage | 5～28VDC |
| Overall weight | With display ≈ 160g Without display ≈ 138g |
| Response frequency | ≤2Hz |
| Stable class=”info” performance | ±1%RHFS/year±0.2℃/year |
| Protection level | IP65 |
| Response speed | The temperature was increased by 10°C per step, the humidity was increased by 10%RH per step, and the gas flow rate was 0.1m/s. |
| Atmospheric pressure accuracy | 0.25%FS |
| Environmental conditions | |
| Ambient temperature | -40～85℃ |
| Ambient humidity | 0%～95%RH(no condensation, no condensation) |
| Electrical protection | |
| Short circuit protection | permanent |
| Reverse polarity protection | No damage, but not working |
| Insulation resistance | ≥100MΩ,500VDC |
| Dielectric strength | 500VAC |
| Output Limitation | |
| temperature | 0~1650 |
| humidity | 0~1000 |
| Atmospheric pressure | 100~15000 |
| Overall material | |
| Main shell | ABS engineering plastics contact the measured medium |
| Filters | Polyethylene (density 50μm) in contact with the measured medium |
| Cable locking head | Nylon (locking wire diameter 4 to 6 mm) contacts the measured medium |
| Seals | Nitrile rubber contacts the measured medium |
| show | LCD display with backlight |
| Mechanical stability | |
| Vibration resistance | 5g (20…2000Hz) complies with IEC60068-2-6 standard |
| Impact resistance | 500g/1ms in accordance with IEC60068-2-27 standard |
CWS29Y Wall Mounted Temperature Humidity And Atmospheric Pressure Transmitter
Inquiry Cart
0