Customized Two Way Rod Seals For Hydraulic Cylinders PTFE Material And Customization
Brand Name:INDRON®
Certification:GB/T19001-2016/ISO9001:2015, CHINA CLASSIFICATION SOCIETY
Minimum Order Quantity:1
Delivery Time:15working days
Payment Terms:T/T
Place of Origin:China
Contact Now
Add to Cart
Verified Supplier
Location:
Guangzhou Guangdong China
Address:
Unit 202, 16 Lianpu Street, Huangpu District, Guangzhou, Guangdong, China
Supplier`s last login times:
within 12 hours
Product Details
Company Profile
Product Details
Customized Two Way Rod Seals for Hydraulic Cylinders PTFE Material and Customization
INDRON® seals and gaskets are more durable than ordinary bearing
materials under various operation medium conditions, such as dry
friction, water lubrication (clear water or water containing sand
and shale), oil lubrication and grease lubrication, etc. and even
the operation condition of impulsive loads. INDRON® oil and gas
sealing material has excellent mechanical properties, good
rigidity, toughness, hardness, wear resistance, small permanent
compression set, excellent high and low temperature resistance, and
excellent aging resistance. It is mainly used to prevent
lubricating oil from leaking out or oil mist overflowing in the oil
tank.
Various materials are available, including ELASTOMERIC POLYMER,
PTFE, UPE, PU, LAMINATED COMPOSITES, FRP, CARBON, GRAPHITE, RUBBER,
NBR, FKM, , TPE.
| Performance | Parameters |
| Density | (1.90~2.00)g/cm³ |
| Shore D Hardness | 67.0~75.0 |
| Glass Transition Temperature | ≥250ºC |
| Tensile Strength | ≥38Mpa |
| Bending Strength | ≥80Mpa |
| Compressive Strength | ≥70Mpa |
| Impact Strength | ≥7.0KJ/m² |
| Coefficent of Friction | 0.12~0.18 |
| Volume Resistivity | ≤50 |
| Material Grade | |||||
| Bearing(lining) | INDRON®TSTN | INDRON®HRBR | INDRON®HAWF | INDRON®UNIV | INDRON®PLAT |
| Material | Synthetic Engineering Elastomers | Synthetic Engineering Elastomers | SyntheticEngineering Elastomers | Synthetic Engineering Elastomers | Synthetic Engineering Elastomers |
| Recommended Workplace | Guide Bearings & Seals | Guide Bearings& Seals | Guide Bearings & Seals | Guide van, connecting rod bushing | Guide vane, connecting rod bushing |
| Temperature Limit | 70℃ | 70℃ | 70℃ | 70℃ | 70℃ |
| Dry Rub | Yes | low speed | low speed | Yes | Yes |
| Acid Resistance | limit | limit | limit | limit | limit |
| Alkaline Resistant | limit | limit | limit | limit | limit |
| Hydrocarbon Suitability | Yes | Yes | Yes | Yes | Yes |
| Abrasion Resistance | good | excellent | excellent | good | good |
| Friction Pair(bushing) | bronze | HRC40 | HRC40 | HRC40 | HRC40 |
| Stainless | recommend | recommend | recommend | recommend | |
| Typical Application | water, sea water | water, sea water | water, sea water | water, sea water | water, sea water |
| Most fluids(pH 5-10) | Most fluids(pH5-10) | Most fluids(pH5-10) | Most fluids(pH 5-10) | Most fluids(pH5-10) | |
| Note | Lowest coefficient of friction,suitable for dry running applications, good wear resistance | Use silt water under moderate grinding conditions | Use ofsilt-containing water under high grinding conditions. Contains abrasion resistant | high load capacity | high load capacity |
Customized Two Way Rod Seals For Hydraulic Cylinders PTFE Material And Customization
Inquiry Cart
0