Flexible Foam Production in VPOP-45 Polymer Polyol Mixed with TDI and Additive
Minimum Order Quantity:1000 kg
Delivery Time:Peak Season Lead Time: within 15 workdays, Off Season Lead Time: within 15 workdays
Payment Terms:T/T, L/C
Model NO.:VPOP-45
Solid Content:44-47.5%
Oh Value:28-32
Contact Now
Add to Cart
Verified Supplier
Location:
Shanghai Shanghai China
Address:
Room 305, No. 9 Building, No. 16299 Puwei Road, Shanghai, China
Supplier`s last login times:
within 39 hours
Product Details
Company Profile
Product Details
Polymer polyol VPOP-45
Introduction
The VPOP-45 Mainly used for high load-bearing polyurethane,high-resilience block flexible foam,molding flexible foam,integral skin flexible foam and semi-flexible foam etc.
Specification
Introduction
The VPOP-45 Mainly used for high load-bearing polyurethane,high-resilience block flexible foam,molding flexible foam,integral skin flexible foam and semi-flexible foam etc.
Specification
| Test project | Unit | Indication range |
| Appearance | Milky white viscous liquid | |
| Solid content | % | 44-47.5 |
| OH Value | mgKOH/g | 28-32 |
| Misture | % | ≤0.08 |
| Viscosity | mPa.s,25ºC | 4000-5500 |
Packing
200KGS DRUMS,FLEXIBAG
Handling Precautions
Flash point is above 200ºC (open cup method), flammable but non-explosive. In case of fire, put out with foams, dry powder, steam or water.
It is almost non-toxic, and the steam can irritate the eyes. When inhaling the steam, it can cause headache, loss of appetite, vomiting and other skin stains, and then wash with soap and water. When the eyes touch, wash with low-pressure water or consult a doctor. If skin contact occurs, wash exposed areas thoroughly with soap and water.
Storage
Recommended storage temperature (ºC):10-35Shelf life (ex-works) 12 months if stored in sealed, moisture-tight containers.
Partially used containers should be tightly resealed due to the hygroscopic nature of the product.
Flexible Foam Production in VPOP-45 Polymer Polyol Mixed with TDI and Additive
Inquiry Cart
0