CPU / TPU Universal Adhesive Bonding Agent Solvent Based Clear One Component
Brand Name:Thinkbond
Model Number:xxxxx
Minimum Order Quantity:None
Delivery Time:5-15 working days
Payment Terms:T/T
Place of Origin:China
Contact Now
Add to Cart
Verified Supplier
Location:
Shanghai Shanghai China
Address:
Floor 2-3, Building 20, Hongxing International Plaza, Lane 1818, Lianhang Road, Pujiang, Shanghai
Supplier`s last login times:
within 48 hours
Product Details
Company Profile
Product Details
Universal bonding agent for CPU/TPU Solvent-Based Adhesive
Application Field:
It is a Clear One-Component Solvent-Based Bonding Agent for
Castable Polyurethane Elastomers and Thermoplastic Polyurethane
Elastomers (PU’s And TPU’s).
It is a heavy metals free product.
Properties:
State : liquid
Shelf life: 24 months
Advantages:
- Universal bonding agent for CPU
- Easy to apply
- High bonding activity
- Less harm to health
Excellent long-term pre-curing properties
Good resistance of cold and hot water
Cost-effective
Application:
- Prepare the metal surface properly by removing completely oil, grease and dirt.
- Blasting the surface with grit blasting steel so that the surface roughness is greater than 15 µm.
- For aluminum surfaces we recommend the use of aluminum oxide as abrasive.
- Clean again the substrate to remove dust from blasting residues.
- If specified, the metal part can be phosphatized, galvanized, chromate conversion treated or KTL,before applying adhesive.
Applying Thinkbond:
Agitation: We recommend stir Thinkbond 942 before the application to avoid
settle down.
Brushing: Application by brushing is normally undertaken without further
dilution, but for coating large areas, dilution with MEK (or the
diluent blend shown below) improves flow and speed of application.
Spraying: We recommend an HVLP gun using 1.5 Bar air-pressure and a nozzle
size of 1 -1.5mm. For this application we recommend diluting
between 50 and 100% v/v.
Roller coating: Dilute to 35 - 45 seconds on a DIN 4 or Ford 4 cup at 25 C for
most roller application processes. Dilution with a high boiling
solvent like MPA may be necessary to achieve the best finish and to
reduce the skinning of the bonding agent in the applicator.
Drying: Dry the film between 10 and 30 minutes at room temperature. If it
is necessary to reduce drying time, we recommend to use forced air
for 5 minutes at 100ºC maximum. Do not use in this stage
temperatures above 100ºC to avoid adhesive pre-cure. After this
process, follow to cure.
Thickness of application layer:
The film obtained by applying Thinkbond 942 is colorless.
The layer thickness must be between 15 and 25 µm.
For severe environments or dynamic fatigue applications, use ≧25
microns. Under these conditions it is possible to achieve bonds
with no edge-failure after 400 hour salt-spray tests
Parts with Thinkbond 942 already applied can be stored for 30 days
prior to cure.
Storage:
Keep container tightly closed during storage and always keep away
from heat sources. Store in an environment below 10ºC increases the
shelf life of the adhesive.
More Thinkbond adhesive:
| Application | Suitable code | Dispersing medium | Advantages |
| Bonding agent for CPU | Thinkbond 942 | Solvent based | Universal bonding agent for CPU; Easy to apply; High bonding activity, Less harm to health. |
| Bonding agent for CPU | Thinkbond 946 | Solvent based | Excellent long-term pre-curing properties; Good resistance of cold and hot water; Cost-effective. |
| Bonding agent for fluorine rubber & silicone rubber | Thinkbond 94S | Solvent based | Environmentally friendly; Diluted with absolute ethanol; Universal applying and can be used for various skeletons. |
| Bonding agent for fluorine rubber & silicone rubber | Thinkbond 93H | Solvent based | Environmentally friendly; Diluted with absolute ethanol; Universal applying for various vulcanization systems fluorine rubber. |
Shanghai LoreChem Co., Ltd. was established in 2008. It is a
high-tech enterprise which is dedicated to serve releasing products
which involve semi-permanent release agent, anti-sticking, surface
lubrication and thermal reactive adhesive. Shanghai LoreChem has
been improving product quality for 15 years. The releasing products
are mainly applied in rubber, polyurethane and composite industry.
The brand of Lubekote for release agent and Thinkbond for adhesive
have been registered in China. Both of them are well known in the
industry.
Shanghai LoreChem 's business is all over the domestic and foreign
high-end production enterprises by providing professional technical
solutions and services. The company's long-term goal is to become
one of the best suppliers of release agent in Asia.
CPU / TPU Universal Adhesive Bonding Agent Solvent Based Clear One Component
Inquiry Cart
0