HDPE Textured Geomembrane Chemical Resistant and Temperature Adaptable for Landfill Sites
Brand Name:JianYi
Certification:ISO9001
Model Number:6m-8m Width and 50m-100m Roll Length
Minimum Order Quantity:330㎡
Delivery Time:7-15 days
Payment Terms:T/T, L/C
Contact Now
Add to Cart
Verified Supplier
Location:
Changsha Ningxia China
Address:
Chuangye Avenue,Ningxiang Economic Development Zone,Changsha City,Hunan Province,P.R.C.
Supplier`s last login times:
within 19 hours
Product Details
Company Profile
Product Details
Chemical Resistant and Temperature Adaptable HDPE Textured
Geomembrane for Landfill Sites
Product Introduction
Spray Coarse Geosynthetics Membrane is a special geosynthetic
material. It is produced on the basis of traditional polyethylene
impervious membrane production technology by updating production
equipment to form a granular rough surface on the produced
geomembrane. This design not only improves the frictional
performance of the geomembrane surface but also has stronger
tensile strength compared to the same specification smooth film.
Product Properties
1. Impermeability: Inherited the excellent impermeability
characteristics of HDPE geomemofilm, effectively preventing the
penetration of water and pollutants.
2 Chemical corrosion resistance: It has good chemical corrosion
resistance and can resist the erosion of various chemical
substances.
3. Resistance to environmental stress cracking: It can also
maintain stability under harsh environmental conditions and is not
easy to crack.
4. Temperature adaptability: can be used in a wide temperature
range, with good heat resistance and cold resistance.
5. Surface textures: Specially designed columnar or point-like
textures that provide additional friction and adhesion.
6. High coefficient of friction: The rough surface of the column
points increases the coefficient of friction with soil or other
covering materials, helping to prevent the geomemofilm from sliding
on the slope.
Product Application
The application field of the sprayed rough geomembrane is very
extensive. It can be used for landfill sites, tailings storage
sites, channel seepage prevention, dike seepage prevention, and
subway projects, etc. In these projects, the sprayed rough
geomembrane can not only play a seepage-proof role but also enhance
the membrane's anti-bearing deformation force, suitable for slope
membrane surface projects that require covering soil and have a
large friction coefficient.
Products series
Single textured geomembrane, double-wall textured geomembrane.
Product Specification
* Thickness(mm): 0.30mm~3.00mm
* Width: 4m~8m
* Roll length: 50m~100m (customized request accept)
PS: Customized request accept for all above.
Geomembrane Series
Textured HDPE Geomembrane For Landfill (GB/T 17643-2011(GH-2T1,GH-2T2))
| ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
(CJ-T234-2006)
| Specification | 1.00mm | 1.25mm | 1.50mm | 2.00mm | 2.50mm | 3.00mm | Remark | |
| Item | ||||||||
| Thickness (mm) | 1.00mm | 1.25mm | 1.50mm | 2.00mm | 2.50mm | 3.00mm | ||
| Textured Highth (mm) | 0.25 | |||||||
| Density (g/c㎡,≥) | 0.94 | |||||||
| Tensile Properties | ||||||||
| Yield Strength (N/mm,LD/TD) | 15 | 18 | 22 | 29 | 37 | 44 | ||
| Breaking Strength (N/mm,LD/TD) | 10 | 13 | 16 | 21 | 26 | 32 | ||
| Yeild Elongation Rate (%) | 12 | |||||||
| Breaking Elongation Rate (%) | 100 | |||||||
| Rectangular Tear Strength (N) | 125 | 156 | 187 | 249 | 311 | 374 | ||
| Puncture Strength (N) | 267 | 333 | 400 | 534 | 667 | 800 | ||
| Environmental Stress Crack Resistance (h) (A single point of incision constant tensile method) | 300 | |||||||
| Carbon Black | ||||||||
| Carbon Black Content(Rang) (%) | 2.0~3.0 | |||||||
| Carbon Black Dispersion | Nine of 10 observation area should be grade 1 or grade 2, not more than 1 of grade3 | |||||||
| Oxidative Induction Time (OIT) | ||||||||
| Standard OIT (min) | 100 | |||||||
| High Pressure OIT (min) | 400 | |||||||
| 85℃ Oven Ageing (Minimum Average) | ||||||||
| 90 days after baking, the standard OIT retention(%) | 55 | |||||||
| 90 days after baking, the hight pressure OIT retention(%) | 80 | |||||||
| The Anti-UV Strength | ||||||||
| Ultraviolet irradiation after 1600 hours, the standard OIT retention(%) | 50 | |||||||
| Ultraviolet irradiation after 1600 hours, the high pressure OIT retention(%) | 50 | |||||||
| -70℃ The Low Temperature Embrittlement Performance mpact | Pass | |||||||
| Water Vapor Penetration Coefficient g.cm (cm2.s.Pa) | ≤1.0X10-13 | |||||||
| Dimensional Stability | ±2 | |||||||
HDPE Textured Geomembrane Chemical Resistant and Temperature Adaptable for Landfill Sites
Inquiry Cart
0