River Cleaning Boat For Aquatic Vegetation No-Load Draught 0.55m High Sailing Speed ≥4km/h

River Cleaning Boat for Aquatic Vegetation

Water surface cleaning ship is a kind of equipment for cleaning aquatic plants such as water weeds,

duckweed, water hyacinth and floating domestic garbage.

When working, the hydraulic cylinder is controlled by the hydraulic system to lower the front collection

tank below the water surface. The most front bottom shear starts to work under the drive of the hydraulic

motor, and its main function is to cut the root of the water grass. There are two circular saw blades on

both sides of our collection pod, which are driven by hydraulic motor to turn rapidly respectively. Sharp

saw blades are the key to cutting transverse aquatic plants, which can not only cut off the branches

quickly, but also clear the path for cleaning the ship. The saw blades and the bottom scissors cooperate

with each other to carry out the first step of cutting and collecting. Next to the bottom shear is the

collection chain in the front cabin. Driven by the motor, the collection chain starts to rotate and transfer

the cut water weeds to the storage cabin, thus completing the collection work. When the water weeds

or floating objects fill the middle and rear compartments, the ship can drive to the shore to unload

the materials. Start the chain in the rear cabin to run quickly, unload the water grass or floating

material to the shore, so that a job is completed, and the water cleaning ship is driven back to the

work site for cycle working.

Automatic cleaning ship is currently the most widely used, according to the different plants on the water,

can be used for cleaning ship supporting different parts, such as saw blade, bottom shear, vertical shear,

wheel knife, etc., according to the water area is different, the design meets the requirements of the hull

size, some complex waters can also be used with several cleaning ships, wish our cleaning ship can protect

our green mountains to contribute.