Atomizer Cleaner Focused On Fluid Conveying Metering Proportioning Mixing And Atomization Technologies
Brand Name:Techfly
Minimum Order Quantity:1
Delivery Time:3-5weeks
Payment Terms:,T/T,L/C
Place of Origin:CHINA
Price:RFQ
Contact Now
Add to Cart
Verified Supplier
Location:
Wuhu Anhui China
Address:
4th floor , No. 39, Weisi Road, Jiujiang Economic Development Zone, Wuhu City, Anhui Province
Supplier`s last login times:
within 1 hours
Product Details
Company Profile
Product Details
Atomizer Cleaner Focused On Fluid Conveying, Metering, Proportioning Mixing, And Atomization Technologies
Overview of fluid equipment
The atomizer cleaning machine is a product that automatically
completes the cleaning of spray guns/spin cups in an extremely
short time according to pre-programmed cleaning procedures, replacing manual cleaning
operations. Meanwhile, it significantly reduces the amount of
cleaning solvent used. When connected to a waste solvent recovery system, the waste
solvent is stored centrally and can be reused after filtration,
distillation and other treatments, which can greatly reduce the cost of cleaning solvents
and reduce VOC emissions.
It can improve the quality of product spraying, reduce the
rejection rate, increase the first-pass yield and reduce downtime.
It also reduces the wear and tear of the atomizer and is equipped with purge air to blow dry the
spray cap after cleaning. With a 304 stainless steel structure, it
is easy to clean and features an explosion-proof design.
360°flushing nozzle
Rotary impeller design enables 360-degree alternating flushing of the spray head with air and solvent. The sealed adapter prevents solvent spillage.
Quick disassembly
Quick-screw design. It enables quick cleaning of the barrel
interior. The entire stainless steel barrel body undergoes
polishing treatment, with an open-type discharge.
Safe and explosion-proof
The entire machine adopts a pneumatic design. The impeller uses
mechanical ceramic bearings, and stainless steel pneumatic valves
are employed for switching fluids and air. The equipment can
achieve safe and explosion-proof operation once grounded.
Small size easy to deploy
With a barrel body diameter of φ250, it occupies small floor space. The standardized discharge interface facilitates waste liquid recovery.
Cleaning process
| C h a n g e c o l o r , c l e a n a n d f i l l | |||||||||||
| step | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 10 | |
| Time (second) | 1.5 | Actual | 1 | 0.5 | 0.5 | 0.5 | 0.5 | 0.5 | 3.5 | 1.5 | |
| conditions | |||||||||||
| The robot is ready for cleaning | √ | ||||||||||
| Change color,clean and fill | √ | ||||||||||
| Dry ambient air | √ | √ | √ | √ | √ | √ | √ | √ | √ | √ | √ |
| Head solvent | √ | ||||||||||
| Air from the nozzle | √ | √ | √ | ||||||||
| The robot is in the dry position | √ | ||||||||||
| The robot is at the starting position | √ | ||||||||||
| 7s | 10s | 150CC |
| washing time | Start position to start position cycle time | Solvent consumption |
Note: It is preferable to perform the solvent/air/solvent/air cycle rather than a single solvent/air step (even if longer) This ensures better mechanical
cleaning efficiency, particularly in severe contamination scenariowhere emulsions form. For mild contamination, a single solvent/air step can be used. The backflow valve prevents air from entering the solvent during simultaneous valve operation, eliminating the need for pause intervals between solvent and air valve closures. Additionally, introducing air into the solvent during the cleaning process enhances operational efficiency.
Introduction of cleaning machine structure
1--adapter 2--flooding nozzle 3--Rotary impeller
4--buffer spring 5--installation base 6--bleeder pipe
7--Drying air inlet 8--Air solvent switching valve 9--ground lead
1
Order information
| GW | Gun | Quantity | Atomizer model | |||||
| 1:Spray gun | 1: 1 set | 1: AGMD | 6: ABB RB1000i-SAD 9: Xp Pro Auto * *Can be customized according to different models | |||||
| 2: Spin cup | 2: 2 sets | 2: TDA80 | 7: ABB RB1000i-SSD | |||||
| 3: Cobra3C | 8: RMA670 spin cup | |||||||
| 4: AG362 | 9: Xp Pro Auto * | |||||||
| 5: PerformAA | *Can be customized according to different models | |||||||
Technical parameter
| Maximum paint pressure | 300 psi(21 bar,2.1 MPa) |
| (low pressure system) | |
| Maximum air pressure | 100 psi(7 bar,0.7 MPa) |
| Solvent inlet size | (φ6*8) |
| Air inlet dimensions | (φ6*8) |
| Valve controls airway dimensions | (φ4*2.5) |
| working temperature | 5 - 50° C(41 - 122° F) |
| size | φ250mm*H620mm |
| Applicable fluids | Single component, solvent and water based coatings, polyurethane, epoxy resin, etc |
| Infiltration components | 316 stainless steel,304 stainless steel,FFKM,PTFE |
| Maximum solvent consumption | 150cc |
| weight | about 10Kg |
Contact us
Zhenglei (Managing Director)
MP: +86-18655370553
Email: Zhenglei@techflyrobot.com
Fengor_Hu (Executive Director)
MP:+86-15665538866 (whatsapp)MP: +86-18356576525(wechat )
Skype: hufengguang1980
Email: hufengguang@techflyrobot.com
Address: No. 39, Weisi Road, Jiujiang Economic Development Zone, Wuhu City, Anhui Province,China.
Atomizer Cleaner Focused On Fluid Conveying Metering Proportioning Mixing And Atomization Technologies
Inquiry Cart
0