Product Details
10 cbm Wet and Dry High Pressure Road Sweeper Truck
Dry road sweeper: The dry road sweeper adopts a dry dust removal method, which means
that the sweeper does not spray water during the dust removal
process during cleaning operations. Therefore, a filter must be
installed in the garbage bin or air duct of the dry road sweeper.
During the cleaning operation of a dry road sweeper, the garbage
with a high density that is sucked in from the suction port will
naturally settle when entering the garbage bin due to the sharp
decrease in wind speed in the bin. However, the small dust with a
light density that is sucked in will be intercepted by the filter
as it passes through the air flow. According to the different types
of filters used by road sweepers, some dry road sweepers can use
water spray to compress dust while others cannot use water spray to
prevent filter blockage.
Wet sweeper: The wet sweeping vehicle adopts a wet dust removal method, which
means that during the sweeping operation, in addition to using
water spray to compress dust at the vertical sweeping point, the
sweeping vehicle uses water spray to remove dust at the suction
nozzle and suction pipe. The purpose of spraying dust
at the vertical sweeping point is to prevent dust from coming out
during the sweeping operation of the road sweeper, and to spray
water at the suction nozzle and suction pipe for dust removal. The
purpose is to moisten and aggregate small dust sucked through the
suction nozzle into larger volume particles in the water mist, so
as to settle in the garbage bin. So, a wet and dry dual-purpose
road sweeper is a combination of the two, which can achieve
waterless cleaning or sprinkle water to reduce dust in areas with
high dust content before cleaning, achieving the function of wet
road sweeping and reducing dust. It is widely used in road cleaning
operations in urban streets, highways, airports, docks, and other
places
Special performance
The dry and wet road sweeper equip the function of washing and
sweeping car and vacuuming car in one, specializing in washing and
planing roads, sand and gravel plants, coal plants, mixing
stations, ports, Pier and other heavily polluted road conditions,
can change the air duct at any time to change the dust reduction
mode, can not need to use water dust reduction, no limited by the
distance from the water source, it is an all-terrain, all-weather
road sweeper, especially suitable for cold and dusty areas. Dry and
wet dual use, four seasons all day Hou coverage!
Cleaning: auxiliary engine drive hydraulic oil pump and fan work.
Hydraulic oil pump drive left and right sweep plate expansion,
lifting Spin. The left and right sweep tray sweeps the garbage on
both sides under the road sweeper and in front of the suction
nozzle. The fan works to make the dustbin and suck The duct
composed of the tube and the nozzle produces a high-speed air flow.
Under the action of the air flow, the garbage is sucked into the
nozzle and enters the garbage
In the box; The chassis engine drives the suction car to move
forward, and the garbage swept in front of the suction nozzle
continues to enter the suction nozzle. And a steady stream of
suction into the trash, to achieve road cleaning.
Dust removal: The garbage box is designed in layers, and the clean
air is discharged after the dust is filtered through the filter
cylinder, and the granular garbage is straight Connect into the
garbage box; When the road is wet or rainy, by switching the air
duct, all the garbage is directly settled by gravity type into the
garbage bin. The garbage and dust in the body of the suction
carriage are separated by inertia, impact separation and filtration
three-stage dust removal, the first dry dust removal mechanism is
adopted to realize the automatic dust removal of the filter system
Main Technical specification
Overview |
Chassis model | DFH1180EX8 |
Wheelbase | 4700mm |
Front/rear suspension | 1430/2150 mm |
Chassis engine | B190-33 |
Spare engine | Yuchai 140hp |
Chassis engine | 140kw, 5900cc, 190hp |
Spare engine | 103 kW |
Tire | 10.00R20 |
Max upgrade angle | 30% |
Emission standard | Eu 3 |
Accelerating outside noise | ≤84dB(A) |
Max speed | 103 km/h |
Approach angle | 20° |
Departure angle | 13° |
Kurb weight | 11980 kg |
Whole weight | 18000kg |
Whole dimension | 8650×2520×3250mm |
Minimum height above ground | 230 mm |
High pressure clean |
Clean speed | 3~15 Km/h |
Clean width | 2.4 m |
Water pressure | 10 MPa |
Water pump flow | 142 L/min |
Clean and suction performance |
Cleaning efficiency | ≥95% |
Maximum suction particle size | 110 mm |
Clean and suction width | 2.4 m |
Max clean capacity | 51000 m2/h |
Disc brush size | ≥320 mm |
Clean and suction speed | 3-20 km/h |
Tank capacity |
Water tank volume | 7 m³ |
Dust tank volume | 4.8 m³ |
Dump bin tilting angle | ≥46° |
Discharge door opening angle | ≥85° |
Hydraulic Hydraulic system |
Model | Open, electrical control |
Major parts | Gear pump, hydraulic motor, hydraulic cylinder, solenoid valve |
System pressure | 16 MPa |
Oil tank | 60 L |
Oil temperature | 60 ˚C |
Electrical system |
Model | DC24 V |
Voltage | 24 V |
Battery | 24 V |
Sweeping devise |
Model | Center two swabs, driven by a hydraulic motor, and the front right
can be controlled independently, with a evasive reply function. |
Brush diameter | 850 mm |
Brush angle | Tilt forward: 4-6 degrees Tilt: 4-7 degrees |
Sucking plate |
Model | Double suction, hydraulic control, spring suspension. |
Suction plate diameter | 180 mm |
Suction plate width | 1800mm |
High pressure water system |
Model | post pump |
No:. | Germany PT40 |
System pressure | 10 MPa |
Speed | 1150 r/min |
Water valve model | Hydraulic pressure ball valve. |
Water valve pressure | 7 MPa |
Spray nozzles model | High pressure washing type |
Water filter | Mesh type |
Water spray system | Electric diaphragm pumps, water filters, nozzles, etc. |
| |
Truck tools
No:. | ITEM | QTY | REMARK |
1 | Fire hose | 2 | |
2 | Fire wrench | 1 | |
3 | Water filter wrench | 1 | |
4 | High pressure water jet gun | 1 | |
5 | Spare tire | 1 | 10.00R20 |
6 | Manual hydraulic pump rocker | 1 | |
Truck spare parts
No:. | ITEM | QTY | |
1 | Brushing | 2 | |
2 | Suction cup front rubber | 1 | 7 m |
3 | After the suction cup | 1 | |
4 | Fan belt | 5 | |
5 | Water pump belt | 3 | |
6 | Hand high pressure water gun | 1 | |
7 | O-rings and combination washers | | |
8 | Middle baffle rubber | 1 | |
9 | Sealing strip | 1 | 10 m |
10 | Edge card sealing strip | 1 | 1 m |
11 | Straight card sealing strip | 1 | 9 m |
12 | Bearings | 2 | |
13 | Vacuum hose | 1 | |
14 | Outer rings of suction cups | 4 | |
15 | Hand operate dust suction hose | 1 | 6 m |
16 | Gloves | 1 | |
Major import configurations
No. | Item | Type | Manufacturer |
1 | High pressure water pump | PF40 | Germany PINFL |
2 | Automatic unloading after valve | VB200/150 | Germany PINFL |
3 | Flood valve | VS200-180 | Germany PINFL |
4 | Nozzle | B1/4MEG | America spray company |
5 | Liquid level switch | LME200B5/24V | Italy SOFIMA |
6 | CPU | / | Germany STW |
7 | Digital quantity extension module | / | Germany STW |
8 | The central distribution box | DVEC | America COOPER |
9 | Stepping motor | 57H41-2.7-001 | America Haydn |
10 | Switch gear cabinet | NE-AG | Korea HIBOX |
11 | Switch Control | | Japan IDEC |
12 | Proximity switch | NBB10-30GM50-E0 | PEPPRL FUCHS |
13 | Suction pipe | / | NORRES |
14 | Hydraulic motor | BMR125 | Brevini |
15 | Hydraulic valve | SWH-G02-C4-D2H | Radix stemonae machines |
Wet and Dry High Pressure Road Sweeper Truck Picture
Wet and Dry High Pressure Road Sweeper Truck Function Display
Wet and Dry High Pressure Road Sweeper Truck Bulk Order
High pressure road sweeper truck loading
Company Profile
iTruck has dedicated to special vehicles and accumulated lots of
experience on special vehicles’ design, manufacturing, management
and marketing. iTruck products cover wrecker, sweeper truck, truck
mounted crane, garbage truck, fire engine, sewer truck, bucket
truck, asphalt truck, LED truck, refrigerator truck, tanker truck,
ambulance, semi-trailer series, LPG related, etc., widely used in emergency rescue, environment and sanitation, advertising
and promotion, architecture and civil work, transportation, oil
mining and many other fields.
iTruck is also catching the future trend and is devoted on the
promotion advanced applications on trucks as green tech, intelligentization, which would deeply improve the carbon
footprint, efficiency, and safety.