Red Elastomer O Ring EPDM FKM NBR 70 Shore Rubber O Ring Silicone High Seals Custom Size
Brand Name:ORK
Certification:REACH / ROHS / ISO9001 / IATF / SGS / FDA
Model Number:AS568 & PG Standard O-Rings
Minimum Order Quantity:1000 pieces
Delivery Time:7-10 work days
Payment Terms:T/T , paypal , wechat , Alipay
Contact Now
Add to Cart
Verified Supplier
Location:
Shangrao Jiangxi China
Address:
Road 8. Yanshan Industrial Estate ShangRao City, Jiangxi Prov., 334500, CHINA
Supplier`s last login times:
within 26 hours
Product Details
Company Profile
Product Details
Red Elastomer Material EPDM FKM NBR 70 Shore Standard O Ring for Sealing Element Silicone High Seals Custom Size
Type: O Ring
Size: ID X CS, OD=ID + 2XCS
An o-ring is a simple and versatile ring-shaped packing or sealing
device with a circular cross
section (from which the "O" in its name is derived). The purpose of using O-ring seals is to
prevent leakage and loss of liquids or gases. They simplicity,convenience, and small installation
space. As long as the groove design and material selection are
correct, and the operating
conditions are within the temperature range of the rubber material,
the seal can have a
long-term sealing effect in the static or dynamic seal.
The size of o-ring is determined by the inner diameter ID and the
wire diameter CS. O-ring
size calculation: outer diameter = inner diameter + 2 x wire diameter (OD = ID + 2x
CS).
O-Ring Advantages:
1. O-Rings offer an efficient and economical sealing element for a
wide range of static or dynamic
applications.
2. O-Ring sizes are defined by the inner diameter-ID and the cross
section-CS, our o-ring Inner
Diameter can be from 0.5mm to 1500mm.
3. Standard sizes such as AS568(PARKER sizes), JIS(P TYPE, G TYPE,
S TYPE, V TYPE, F TYPE
sizes), BS1516 sizes Metric sizes as well as non-standard sizes are all avaiblabe.
4. We have more than 2000 o-ring mould toolings, so you could get
any size here without set-up
or tooling charge. Huge inventory of o-rings can meet your urgent requiremnets.
5. A very wide range of elastomer material can be selected, main
material: NBR(BUNA-N, Nitrile),
FKM(FKM), Silicone(VMQ), HNBR,FFKM, EPDM, PU(Polyurethane, urethane), Fluorosilicone(FVMQ),
Neoprene(CR) and so on. Hardness of material can be from 40 ShoreA(Durometer) to 90 ShoreA
(Durometer)
O-Ring Technical requirements:
Appearance meets GB/T3452.2-2007 Material meets HG/T2579-2008 Size
meets GB/T3452.1-2005
In addition, all our products are ROHS and REACH Compliant (we
mainly export products to USA and
Europe market).
O-Ring Features:
1. Good sealing solution, long service life.
2. Easy installation reduces risk.
3. Working in various medium based on different elastomer material.
| Product Name | Rubber O-Ring |
| Materials | NBR, HNBR, EPDM, SILICONE, VITON, FLS, FFPM, FPM , PU ,ACM ,SBR |
| Temperature | NBR(-40~120°C),FFKM(-20~320°C) Viton(-20~200°C),Silicone (-70~220°C) EPDM(-50~150°C),PU(-40~90°C) |
| Feature | Resistance to high pressure, oil, weather, abrasion, solvent, high temperature, abrasion resistant, aging resistant, insulation, acid and alkaline resistant |
| Cerfiticate | ISO 9001:2008 |
| Hardness | 30-90 shores A |
| Color | Red, Black, White, blue, green, Clear, etc |
| Size | Any size, Customized/standard and nonstandard |
| Sample time | If instock, within 3 days after payment |
| Delivery time | 7-15 days by express after payment 10-20 days by ship |
| Shipping | Small quantity: UPS/FeDex/DHL express Large quantity: by Air/Sea |
| Customized | OEM & ODM are welcomed |
| packing | plastic bag&carton box or according to your requirements |
| Application | chemical industry, petroleum industry, medical technique, food industry, sewage-disposal industry, steel industry, semi-conduct industry and so on. |
We have certificates :ISO 9001:2015 , ISO 14001:2015 ,ISO 45001:2018 , IATF , FDA, REACH,ROHS, SGS etc.
For color , we can make as customers' requirements .Below table is the colorful o rings
we made.If you need colored o rings , you can give me pantone number .
We can also produce Automotive Rubber Seals ,Connector Rubber Seals ,Power Tool Rubber seals ,Valve
Rubber Seals ,Pipe Rubber Seals ,Semiconductor Rubber Seals ,Hydraulic Pneumatic Rubber Seals ,Pump
Rubber Seals ,Oil and Gas Seals ,Food Grade Rubber Seals ,Medical Rubber Seals ,Chemical Equipment
Rubber Seals ...etc.
Our Factory
1. Since 2006, focus on rubber seals, especially for auto parts
2. Certificates: ISO9001, IATF16949, ISO14001, ISO45001,ISO 13485
3. Two factories, more than 18000㎡,clean room 600㎡, with 300
workers.
4. Molds > 10000 sets, especially o rings, about 5000 sets.
5.O-ring series covers American standard (AS568), Japanese standard (JIS), national
standard(GB), and produces a large number of customized non-standard parts.
6. Material: NBR, FKM, SIL, EPDM, CR, NR, PU, HNBR, FFKM, SBR .The rubber materials
used meet the requirements of ROHS2.0 and REACH235.
7. Material Certificates: FDA, ROHS, REACH, UL157, CP65 WRC, EN549,EN45545.
8. Products are widely used in automotive parts, electronic
connectors, valves, pneumatics,
power tools, new energy, medical equipment, electronic products and
other fields.
9. company has introduced HRP, ERP and other systems since its
inception.
10. The company's labor cost, raw material procurement, production
process and
product quality were comprehensively and scientifically controlled.
Progress
Quality control
Material Inspection:Storage of all raw materials before the test, and issue a report on the
corresponding material properties, compared with raw material's own property report, two
reports property values is consistent, can put in storage.
Model Inspection:After the mold development or mold cleaning finished on the machine,
we will test all the specifications of the mold to ensure that each cavity of the product
specifications and quality.
Production Inspection:The production process of the product inspection personnel timing
semi-finished product inspection, ensure the quality of the rationality of technology, defective
rate control in a reasonable range.
Quanlity Control:The quality inspection department will conduct a sampling
inspection of
each batch of products
Production Full Inspection:The optical inspection machine can ensure the appearance and
dimension of the product are 100% qualified.
Cooperative partner
Ruichen company have cooperated with many superior customers as below , we have complete system and excellent productivity
to serve for you
Our service
- Quality is our culture,create value to customers is our purpose.
- Professional engineers team with more than 20 years experience are able to provide different kinds
- of material formula according to clients requirements.
- Professional design and development for rubber&plastic parts.
- Advanced equipments with high production efficiency assure fast delivery.
- Factory price low price and small MOQ.
- All products come out with ISIR doc and MDS,PPAP,MSDS,available.
- Not reclaimed rubber used all of our material can ROHS and REACH compliant.
- IATF factory high quality guarantee.
- Prompt delivery 3 to 7 days for prototype tooling,10-15 days for production tooling.
- 20minutes from factory to airport or sea port.
- One stop purchase service for rubber parts,plastic parts,matal parts and aluminum parts save your time
- and costs.
- All of your information will be keep secret here.
International exhibition
Why RUICHEN?
Many big companies select RUICHEN for their rubber seals and customized rubber parts because we
always
satisfy them in quality, price, delivery, service, etc. At the same time, we also attach great importance to the
small customers in niche markets.Whether your purchase quantity is big or small, you are our
valuable partners.
High Quality
We continue to manufacture high-quality products for all customers
and pursue 100% customer satisfaction,
which has become one of our core competencies.
Profession
We have rich experience in materials, products, and production and
excellent international trade and language
communication skills.
Best Services
From quoting, sampling, production, and shipping to after-sales,
our sales will provide you with the best service
so that you can rest assured completely.
10000+ Projects Delivered
Over 10K projects have been sent to our customers worldwide in
recent years, and we have received countless
positive comments.
Low Price
Our customers can obtain maximum profits through the ISO management
system and intelligent manufacturing
to reduce our costs continuously.
Massive Capacity
Our in-house facilities allow us to get your projects done fast.
And thanks to our strong relationship with rapid
materials partners, our capacity is not limited.
Fast Delivery
Unlimited capacity, experienced engineers, and a flexible
production system allow us to create your seals and
production parts in a short period.
1000+ Happy Customers
We aim to keep every customer happy with reliable quality, fast
turnaround, and excellent services. We want all
our new customers to become long-term customers.
Red Elastomer O Ring EPDM FKM NBR 70 Shore Rubber O Ring Silicone High Seals Custom Size
Inquiry Cart
0